Novel Disk Type Ultrasonic Traveling Wave Motoforr High Torque

Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review

Autorschaft

  • J. W. Krome
  • J. Wallaschek

Externe Organisationen

  • Universität Paderborn
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Titel des Sammelwerks1997 IEEE Ultrasonics Symposium
UntertitelProceedings
Seiten385-390
Seitenumfang6
Band2
PublikationsstatusVeröffentlicht - 1997
Extern publiziertJa
Veranstaltung1997 IEEE Ultrasonics Symposium - Toronto, Kanada
Dauer: 5 Okt. 1997 → 8 Okt. 1997

Publikationsreihe

NameProceedings of the IEEE Ultrasonics Symposium
ISSN (Print)1051-0117

Abstract

The stator geometries of ultrasonic traveling wave motors for high torque were investigated. In the disk-type motor, the piezoceramic excitation is inside the nodal circle and the friction contact zone is outside the nodal circle so that high output torque can be expected. By using piezoceramic rings of 90 mm outer diameter and a vibration mode with one nodal circle and 11 nodal lines a stator diameter of 112 mm was realized. A ring-type stator with 98 mm outer diameter was build and used for prototyping a new traveling wave motor. The design and optimization of the stator geometry are discussed.

ASJC Scopus Sachgebiete

Zitieren

Novel Disk Type Ultrasonic Traveling Wave Motoforr High Torque. / Krome, J. W.; Wallaschek, J.
1997 IEEE Ultrasonics Symposium : Proceedings. Band 2 1997. S. 385-390 (Proceedings of the IEEE Ultrasonics Symposium).

Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review

Krome, JW & Wallaschek, J 1997, Novel Disk Type Ultrasonic Traveling Wave Motoforr High Torque. in 1997 IEEE Ultrasonics Symposium : Proceedings. Bd. 2, Proceedings of the IEEE Ultrasonics Symposium, S. 385-390, 1997 IEEE Ultrasonics Symposium, Toronto, Ontario, Kanada, 5 Okt. 1997. https://doi.org/10.1109/ULTSYM.1997.663045
Krome, J. W., & Wallaschek, J. (1997). Novel Disk Type Ultrasonic Traveling Wave Motoforr High Torque. In 1997 IEEE Ultrasonics Symposium : Proceedings (Band 2, S. 385-390). (Proceedings of the IEEE Ultrasonics Symposium). https://doi.org/10.1109/ULTSYM.1997.663045
Krome JW, Wallaschek J. Novel Disk Type Ultrasonic Traveling Wave Motoforr High Torque. in 1997 IEEE Ultrasonics Symposium : Proceedings. Band 2. 1997. S. 385-390. (Proceedings of the IEEE Ultrasonics Symposium). doi: 10.1109/ULTSYM.1997.663045
Krome, J. W. ; Wallaschek, J. / Novel Disk Type Ultrasonic Traveling Wave Motoforr High Torque. 1997 IEEE Ultrasonics Symposium : Proceedings. Band 2 1997. S. 385-390 (Proceedings of the IEEE Ultrasonics Symposium).
Download
@inproceedings{2afdecd78c324560867e7980f78f05cd,
title = "Novel Disk Type Ultrasonic Traveling Wave Motoforr High Torque",
abstract = "The stator geometries of ultrasonic traveling wave motors for high torque were investigated. In the disk-type motor, the piezoceramic excitation is inside the nodal circle and the friction contact zone is outside the nodal circle so that high output torque can be expected. By using piezoceramic rings of 90 mm outer diameter and a vibration mode with one nodal circle and 11 nodal lines a stator diameter of 112 mm was realized. A ring-type stator with 98 mm outer diameter was build and used for prototyping a new traveling wave motor. The design and optimization of the stator geometry are discussed.",
author = "Krome, {J. W.} and J. Wallaschek",
note = "Copyright: Copyright 2004 Elsevier Science B.V., Amsterdam. All rights reserved.; 1997 IEEE Ultrasonics Symposium ; Conference date: 05-10-1997 Through 08-10-1997",
year = "1997",
doi = "10.1109/ULTSYM.1997.663045",
language = "English",
isbn = "0-7803-4153-8",
volume = "2",
series = "Proceedings of the IEEE Ultrasonics Symposium",
pages = "385--390",
booktitle = "1997 IEEE Ultrasonics Symposium",

}

Download

TY - GEN

T1 - Novel Disk Type Ultrasonic Traveling Wave Motoforr High Torque

AU - Krome, J. W.

AU - Wallaschek, J.

N1 - Copyright: Copyright 2004 Elsevier Science B.V., Amsterdam. All rights reserved.

PY - 1997

Y1 - 1997

N2 - The stator geometries of ultrasonic traveling wave motors for high torque were investigated. In the disk-type motor, the piezoceramic excitation is inside the nodal circle and the friction contact zone is outside the nodal circle so that high output torque can be expected. By using piezoceramic rings of 90 mm outer diameter and a vibration mode with one nodal circle and 11 nodal lines a stator diameter of 112 mm was realized. A ring-type stator with 98 mm outer diameter was build and used for prototyping a new traveling wave motor. The design and optimization of the stator geometry are discussed.

AB - The stator geometries of ultrasonic traveling wave motors for high torque were investigated. In the disk-type motor, the piezoceramic excitation is inside the nodal circle and the friction contact zone is outside the nodal circle so that high output torque can be expected. By using piezoceramic rings of 90 mm outer diameter and a vibration mode with one nodal circle and 11 nodal lines a stator diameter of 112 mm was realized. A ring-type stator with 98 mm outer diameter was build and used for prototyping a new traveling wave motor. The design and optimization of the stator geometry are discussed.

UR - http://www.scopus.com/inward/record.url?scp=0031343089&partnerID=8YFLogxK

U2 - 10.1109/ULTSYM.1997.663045

DO - 10.1109/ULTSYM.1997.663045

M3 - Conference contribution

AN - SCOPUS:0031343089

SN - 0-7803-4153-8

VL - 2

T3 - Proceedings of the IEEE Ultrasonics Symposium

SP - 385

EP - 390

BT - 1997 IEEE Ultrasonics Symposium

T2 - 1997 IEEE Ultrasonics Symposium

Y2 - 5 October 1997 through 8 October 1997

ER -