Details
| Titel in Übersetzung | New applications of numerical simulation in inductive surface hardening with flux concentrators |
|---|---|
| Originalsprache | Mehrere Sprachen |
| Seiten (von - bis) | 40-49 |
| Seitenumfang | 10 |
| Fachzeitschrift | HTM - Journal of Heat Treatment and Materials |
| Jahrgang | 70 |
| Ausgabenummer | 1 |
| Publikationsstatus | Veröffentlicht - Feb. 2015 |
Abstract
In this article, two innovations for the simulation of inductive surface hardening processes are introduced. It is shown that numerical simulation is a valuable tool to support the process design of challenging problems. First, a 3 D model for the simulation of scan hardening processes for complex work pieces is presented. The focus in this section is on the concept of modelling. As an example, its application is shown for an inductor with a complex distribution of flux concentrators. The inductor is used for hardening an inner ring of a large bearing. By comparing the results of the simulation with experiments, the model is verified. In the second part of the paper, an inverse numerical calculation approach is introduced, which uses optimization algorithms. Based on the hardening pattern of a work piece, the dimensions and position of the inductor in relation to the work piece as well as the electrical parameters are calculated. A hollow shaft is presented as an example to show that effective process design is possible with the help of this approach.
Schlagwörter
- 3 D modelling, Inductive heating, Inductive surface hardening, Inverse process design, Nonlinear optimization, Numerical simulation
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
- Werkstoffwissenschaften (insg.)
- Metalle und Legierungen
- Werkstoffwissenschaften (insg.)
- Werkstoffchemie
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: HTM - Journal of Heat Treatment and Materials, Jahrgang 70, Nr. 1, 02.2015, S. 40-49.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Neue Anwendungsbereiche numerischer Simulation beim induktiven Randschichthärten mit Feldkonzentratoren
AU - Schlesselmann, D.
AU - Yu, Z.
AU - Dalinger, A.
AU - Nacke, B.
PY - 2015/2
Y1 - 2015/2
N2 - In this article, two innovations for the simulation of inductive surface hardening processes are introduced. It is shown that numerical simulation is a valuable tool to support the process design of challenging problems. First, a 3 D model for the simulation of scan hardening processes for complex work pieces is presented. The focus in this section is on the concept of modelling. As an example, its application is shown for an inductor with a complex distribution of flux concentrators. The inductor is used for hardening an inner ring of a large bearing. By comparing the results of the simulation with experiments, the model is verified. In the second part of the paper, an inverse numerical calculation approach is introduced, which uses optimization algorithms. Based on the hardening pattern of a work piece, the dimensions and position of the inductor in relation to the work piece as well as the electrical parameters are calculated. A hollow shaft is presented as an example to show that effective process design is possible with the help of this approach.
AB - In this article, two innovations for the simulation of inductive surface hardening processes are introduced. It is shown that numerical simulation is a valuable tool to support the process design of challenging problems. First, a 3 D model for the simulation of scan hardening processes for complex work pieces is presented. The focus in this section is on the concept of modelling. As an example, its application is shown for an inductor with a complex distribution of flux concentrators. The inductor is used for hardening an inner ring of a large bearing. By comparing the results of the simulation with experiments, the model is verified. In the second part of the paper, an inverse numerical calculation approach is introduced, which uses optimization algorithms. Based on the hardening pattern of a work piece, the dimensions and position of the inductor in relation to the work piece as well as the electrical parameters are calculated. A hollow shaft is presented as an example to show that effective process design is possible with the help of this approach.
KW - 3 D modelling
KW - Inductive heating
KW - Inductive surface hardening
KW - Inverse process design
KW - Nonlinear optimization
KW - Numerical simulation
UR - http://www.scopus.com/inward/record.url?scp=84981298127&partnerID=8YFLogxK
U2 - 10.3139/105.110250
DO - 10.3139/105.110250
M3 - Article
AN - SCOPUS:84981298127
VL - 70
SP - 40
EP - 49
JO - HTM - Journal of Heat Treatment and Materials
JF - HTM - Journal of Heat Treatment and Materials
SN - 1867-2493
IS - 1
ER -