Nanostructured front electrodes for perovskite/c-Si tandem photovoltaics

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

  • Ihteaz M. Hossain
  • Yidenekachew J. Donie
  • Raphael Schmager
  • Mohamed S. Abdelkhalik
  • Michael Rienäcker
  • Tobias F. Wietler
  • Robby Peibst
  • Andrei Karabanov
  • Jonas A. Schwenzer
  • Somayeh Moghadamzadeh
  • Ulrich Lemmer
  • Bryce S. Richards
  • Guillaume Gomard
  • Ulrich W. Paetzold

Externe Organisationen

  • Karlsruher Institut für Technologie (KIT)
  • Institut für Solarenergieforschung GmbH (ISFH)
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)8878-8897
Seitenumfang20
FachzeitschriftOptics Express
Jahrgang28
Ausgabenummer6
PublikationsstatusVeröffentlicht - 16 März 2020

Abstract

The rise in the power conversion efficiency (PCE) of perovskite solar cells has triggered enormous interest in perovskite-based tandem photovoltaics. One key challenge is to achieve high transmission of low energy photons into the bottom cell. Here, nanostructured front electrodes for 4-terminal perovskite/crystalline-silicon (perovskite/c-Si) tandem solar cells are developed by conformal deposition of indium tin oxide (ITO) on self-assembled polystyrene nanopillars. The nanostructured ITO is optimized for reduced reflection and increased transmission with a tradeoff in increased sheet resistance. In the optimum case, the nanostructured ITO electrodes enhance the transmittance by ∼7% (relative) compared to planar references. Perovskite/c-Si tandem devices with nanostructured ITO exhibit enhanced short-circuit current density (2.9 mA/cm2 absolute) and PCE (1.7% absolute) in the bottom c-Si solar cell compared to the reference. The improved light in-coupling is more pronounced for elevated angle of incidence. Energy yield enhancement up to ∼10% (relative) is achieved for perovskite/c-Si tandem architecture with the nanostructured ITO electrodes. It is also shown that these nanostructured ITO electrodes are also compatible with various other perovskite-based tandem architectures and bear the potential to improve the PCE up to 27.0%. Published by The Optical Society under the terms of the Creative Commons Attribution 4.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.

ASJC Scopus Sachgebiete

Zitieren

Nanostructured front electrodes for perovskite/c-Si tandem photovoltaics. / Hossain, Ihteaz M.; Donie, Yidenekachew J.; Schmager, Raphael et al.
in: Optics Express, Jahrgang 28, Nr. 6, 16.03.2020, S. 8878-8897.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Hossain, IM, Donie, YJ, Schmager, R, Abdelkhalik, MS, Rienäcker, M, Wietler, TF, Peibst, R, Karabanov, A, Schwenzer, JA, Moghadamzadeh, S, Lemmer, U, Richards, BS, Gomard, G & Paetzold, UW 2020, 'Nanostructured front electrodes for perovskite/c-Si tandem photovoltaics', Optics Express, Jg. 28, Nr. 6, S. 8878-8897. https://doi.org/10.1364/OE.382253
Hossain, I. M., Donie, Y. J., Schmager, R., Abdelkhalik, M. S., Rienäcker, M., Wietler, T. F., Peibst, R., Karabanov, A., Schwenzer, J. A., Moghadamzadeh, S., Lemmer, U., Richards, B. S., Gomard, G., & Paetzold, U. W. (2020). Nanostructured front electrodes for perovskite/c-Si tandem photovoltaics. Optics Express, 28(6), 8878-8897. https://doi.org/10.1364/OE.382253
Hossain IM, Donie YJ, Schmager R, Abdelkhalik MS, Rienäcker M, Wietler TF et al. Nanostructured front electrodes for perovskite/c-Si tandem photovoltaics. Optics Express. 2020 Mär 16;28(6):8878-8897. doi: 10.1364/OE.382253
Hossain, Ihteaz M. ; Donie, Yidenekachew J. ; Schmager, Raphael et al. / Nanostructured front electrodes for perovskite/c-Si tandem photovoltaics. in: Optics Express. 2020 ; Jahrgang 28, Nr. 6. S. 8878-8897.
Download
@article{918047b7766040a3933a42011aec0aee,
title = "Nanostructured front electrodes for perovskite/c-Si tandem photovoltaics",
abstract = "The rise in the power conversion efficiency (PCE) of perovskite solar cells has triggered enormous interest in perovskite-based tandem photovoltaics. One key challenge is to achieve high transmission of low energy photons into the bottom cell. Here, nanostructured front electrodes for 4-terminal perovskite/crystalline-silicon (perovskite/c-Si) tandem solar cells are developed by conformal deposition of indium tin oxide (ITO) on self-assembled polystyrene nanopillars. The nanostructured ITO is optimized for reduced reflection and increased transmission with a tradeoff in increased sheet resistance. In the optimum case, the nanostructured ITO electrodes enhance the transmittance by ∼7% (relative) compared to planar references. Perovskite/c-Si tandem devices with nanostructured ITO exhibit enhanced short-circuit current density (2.9 mA/cm2 absolute) and PCE (1.7% absolute) in the bottom c-Si solar cell compared to the reference. The improved light in-coupling is more pronounced for elevated angle of incidence. Energy yield enhancement up to ∼10% (relative) is achieved for perovskite/c-Si tandem architecture with the nanostructured ITO electrodes. It is also shown that these nanostructured ITO electrodes are also compatible with various other perovskite-based tandem architectures and bear the potential to improve the PCE up to 27.0%. Published by The Optical Society under the terms of the Creative Commons Attribution 4.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.",
author = "Hossain, {Ihteaz M.} and Donie, {Yidenekachew J.} and Raphael Schmager and Abdelkhalik, {Mohamed S.} and Michael Rien{\"a}cker and Wietler, {Tobias F.} and Robby Peibst and Andrei Karabanov and Schwenzer, {Jonas A.} and Somayeh Moghadamzadeh and Ulrich Lemmer and Richards, {Bryce S.} and Guillaume Gomard and Paetzold, {Ulrich W.}",
note = "Funding information: Helmholtz Association (HYIG of Dr. U.W. Paetzold [VH-NG-1148]; Recruitment Initiative of Prof. B.S. Richards; HEMF, PEROSEED [ZT-0024] Innovationpool, Science and Technology of Nanosystems); KIT Young Investigator Network; Bundesministerium f{\"u}r Bildung und Forschung (PRINTPERO [03SF0557A]); Deutsche Forschungsgemeinschaft (LAMBDA); Bundesministerium f{\"u}r Wirtschaft und Technologie (“EASi” (FKZ0324040)); German State of Lower Saxony. The authors express their gratitude towards the great spirit of the “KIT perovskite PV taskforce”, especially Isabel Allegro, Diana Rueda-Delgado, Adrian Mertens, Tobias Abzieher, Bahram Abdollahi Nejand and Saba Gharibzadeh. We also acknowledge Patrice Brenner for the focused ion beam cut of the perovskite solar cells. The authors wish to thank H. Kohlenberg and the team from ISFH and from Institute of Electronic Materials and Devices (MBE) at Leibniz Universit{\"a}t Hannover for the Si bottom cell fabrication. The authors gratefully acknowledge the help and support of the Karlsruhe School of Optics & Photonics (KSOP) and Max Planck School of Photonics (MPSP), respectively.",
year = "2020",
month = mar,
day = "16",
doi = "10.1364/OE.382253",
language = "English",
volume = "28",
pages = "8878--8897",
journal = "Optics Express",
issn = "1094-4087",
publisher = "OSA - The Optical Society",
number = "6",

}

Download

TY - JOUR

T1 - Nanostructured front electrodes for perovskite/c-Si tandem photovoltaics

AU - Hossain, Ihteaz M.

AU - Donie, Yidenekachew J.

AU - Schmager, Raphael

AU - Abdelkhalik, Mohamed S.

AU - Rienäcker, Michael

AU - Wietler, Tobias F.

AU - Peibst, Robby

AU - Karabanov, Andrei

AU - Schwenzer, Jonas A.

AU - Moghadamzadeh, Somayeh

AU - Lemmer, Ulrich

AU - Richards, Bryce S.

AU - Gomard, Guillaume

AU - Paetzold, Ulrich W.

N1 - Funding information: Helmholtz Association (HYIG of Dr. U.W. Paetzold [VH-NG-1148]; Recruitment Initiative of Prof. B.S. Richards; HEMF, PEROSEED [ZT-0024] Innovationpool, Science and Technology of Nanosystems); KIT Young Investigator Network; Bundesministerium für Bildung und Forschung (PRINTPERO [03SF0557A]); Deutsche Forschungsgemeinschaft (LAMBDA); Bundesministerium für Wirtschaft und Technologie (“EASi” (FKZ0324040)); German State of Lower Saxony. The authors express their gratitude towards the great spirit of the “KIT perovskite PV taskforce”, especially Isabel Allegro, Diana Rueda-Delgado, Adrian Mertens, Tobias Abzieher, Bahram Abdollahi Nejand and Saba Gharibzadeh. We also acknowledge Patrice Brenner for the focused ion beam cut of the perovskite solar cells. The authors wish to thank H. Kohlenberg and the team from ISFH and from Institute of Electronic Materials and Devices (MBE) at Leibniz Universität Hannover for the Si bottom cell fabrication. The authors gratefully acknowledge the help and support of the Karlsruhe School of Optics & Photonics (KSOP) and Max Planck School of Photonics (MPSP), respectively.

PY - 2020/3/16

Y1 - 2020/3/16

N2 - The rise in the power conversion efficiency (PCE) of perovskite solar cells has triggered enormous interest in perovskite-based tandem photovoltaics. One key challenge is to achieve high transmission of low energy photons into the bottom cell. Here, nanostructured front electrodes for 4-terminal perovskite/crystalline-silicon (perovskite/c-Si) tandem solar cells are developed by conformal deposition of indium tin oxide (ITO) on self-assembled polystyrene nanopillars. The nanostructured ITO is optimized for reduced reflection and increased transmission with a tradeoff in increased sheet resistance. In the optimum case, the nanostructured ITO electrodes enhance the transmittance by ∼7% (relative) compared to planar references. Perovskite/c-Si tandem devices with nanostructured ITO exhibit enhanced short-circuit current density (2.9 mA/cm2 absolute) and PCE (1.7% absolute) in the bottom c-Si solar cell compared to the reference. The improved light in-coupling is more pronounced for elevated angle of incidence. Energy yield enhancement up to ∼10% (relative) is achieved for perovskite/c-Si tandem architecture with the nanostructured ITO electrodes. It is also shown that these nanostructured ITO electrodes are also compatible with various other perovskite-based tandem architectures and bear the potential to improve the PCE up to 27.0%. Published by The Optical Society under the terms of the Creative Commons Attribution 4.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.

AB - The rise in the power conversion efficiency (PCE) of perovskite solar cells has triggered enormous interest in perovskite-based tandem photovoltaics. One key challenge is to achieve high transmission of low energy photons into the bottom cell. Here, nanostructured front electrodes for 4-terminal perovskite/crystalline-silicon (perovskite/c-Si) tandem solar cells are developed by conformal deposition of indium tin oxide (ITO) on self-assembled polystyrene nanopillars. The nanostructured ITO is optimized for reduced reflection and increased transmission with a tradeoff in increased sheet resistance. In the optimum case, the nanostructured ITO electrodes enhance the transmittance by ∼7% (relative) compared to planar references. Perovskite/c-Si tandem devices with nanostructured ITO exhibit enhanced short-circuit current density (2.9 mA/cm2 absolute) and PCE (1.7% absolute) in the bottom c-Si solar cell compared to the reference. The improved light in-coupling is more pronounced for elevated angle of incidence. Energy yield enhancement up to ∼10% (relative) is achieved for perovskite/c-Si tandem architecture with the nanostructured ITO electrodes. It is also shown that these nanostructured ITO electrodes are also compatible with various other perovskite-based tandem architectures and bear the potential to improve the PCE up to 27.0%. Published by The Optical Society under the terms of the Creative Commons Attribution 4.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.

UR - http://www.scopus.com/inward/record.url?scp=85081413273&partnerID=8YFLogxK

U2 - 10.1364/OE.382253

DO - 10.1364/OE.382253

M3 - Article

C2 - 32225505

AN - SCOPUS:85081413273

VL - 28

SP - 8878

EP - 8897

JO - Optics Express

JF - Optics Express

SN - 1094-4087

IS - 6

ER -