Details
Originalsprache | Englisch |
---|---|
Titel des Sammelwerks | Proceedings of the 10th European Workshop on Structural Health Monitoring (EWSHM 2024) |
Publikationsstatus | Veröffentlicht - 1 Juli 2024 |
Abstract
ASJC Scopus Sachgebiete
- Gesundheitsberufe (insg.)
- Gesundheits-Informationsmanagement
- Informatik (insg.)
- Angewandte Informatik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Proceedings of the 10th European Workshop on Structural Health Monitoring (EWSHM 2024). 2024.
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Monitoring Fatigue of Grouted Connections Using Autoencoders and In-Situ Fiber Optical Sensors
AU - Römgens, Niklas
AU - Abbassi, Abderrahim
AU - Talahmeh, Muawiya
AU - Grießmann, Tanja
AU - Rolfes, Raimund
N1 - Publisher Copyright: © 2024 11th European Workshop on Structural Health Monitoring, EWSHM 2024. All rights reserved.
PY - 2024/7/1
Y1 - 2024/7/1
N2 - This paper investigates a traditional autoencoder trained with time series data for unsupervised damage detection and localization. The results are validated using innovative fiber optical sensory inside the grouted connection of a monopile sub-structure. Sensors are installed due to a limited understanding of the degradation mechanisms in grouted connections under cyclic loading. In most experiments, the grouted connection has only been assessed by destructively examining the grouted connection after the appearance of a complete crack pattern.To address these limitations, the signals of the innovative fiber optical sensory are used to gain insight into the crack development inside the grout. Further, the dynamic response of the structure is evaluated using an autoencoder to monitor the changes linked to the degradation process. The fiber sensors are placed within the grout between the diagonal shear keys, which has been identified as the compression strut failure from previous experiments. The cyclic load was repetitively increased to simulate the degradation process and induce structural change inside the grouted connection. After each testing phase, the structure was excited using a shaker, and the acceleration sensors were evaluated using the autoencoder. The results of the study show a high sensitivity of the residuals to minor structural changes that can be explained using the sensors within the grout. Additionally, the local stiffness reduction can be localized evaluating the autoencoder residuals. The study presents the innovative sensory to follow the crack opening of the grout due to cyclic loading. Further, these local changes are detected and localized using an autoencoder with time series data in vibration-based SHM.
AB - This paper investigates a traditional autoencoder trained with time series data for unsupervised damage detection and localization. The results are validated using innovative fiber optical sensory inside the grouted connection of a monopile sub-structure. Sensors are installed due to a limited understanding of the degradation mechanisms in grouted connections under cyclic loading. In most experiments, the grouted connection has only been assessed by destructively examining the grouted connection after the appearance of a complete crack pattern.To address these limitations, the signals of the innovative fiber optical sensory are used to gain insight into the crack development inside the grout. Further, the dynamic response of the structure is evaluated using an autoencoder to monitor the changes linked to the degradation process. The fiber sensors are placed within the grout between the diagonal shear keys, which has been identified as the compression strut failure from previous experiments. The cyclic load was repetitively increased to simulate the degradation process and induce structural change inside the grouted connection. After each testing phase, the structure was excited using a shaker, and the acceleration sensors were evaluated using the autoencoder. The results of the study show a high sensitivity of the residuals to minor structural changes that can be explained using the sensors within the grout. Additionally, the local stiffness reduction can be localized evaluating the autoencoder residuals. The study presents the innovative sensory to follow the crack opening of the grout due to cyclic loading. Further, these local changes are detected and localized using an autoencoder with time series data in vibration-based SHM.
KW - Autoencoder
KW - Damage detection and localization
KW - Fatigue
KW - Fiber Bragg Grating Sensors
KW - Monopile
KW - Vibration-based
UR - http://www.scopus.com/inward/record.url?scp=85202564833&partnerID=8YFLogxK
U2 - 10.58286/29604
DO - 10.58286/29604
M3 - Conference contribution
BT - Proceedings of the 10th European Workshop on Structural Health Monitoring (EWSHM 2024)
ER -