TY - JOUR

T1 - Modeling of an aluminum melting process using constructive polynomial functions

AU - Mohammadifard, Sara

AU - Stonis, Malte

AU - Langner, Jan

AU - Sauke, Sven Olaf

AU - Khosravianarab, Farzaneh

AU - Larki Harchegani, Hossein

AU - Behrens, Bernd Arno

N1 - Funding Information: Sponsored by the German Federal Ministry of Economics and Energy on the basis of a decision of the German Federal Parliament (Project name: Edusal II, sponsor number: 03ET1056B). The responsibility for the contents of this publication lies with the author. Publisher Copyright: © 2018, German Academic Society for Production Engineering (WGP). Copyright: Copyright 2018 Elsevier B.V., All rights reserved.

PY - 2018/5/8

Y1 - 2018/5/8

N2 - Constantly increasing quality requirements and ever-stricter conditions pose difficult challenges for the foundry industry. They must produce the high-quality components demanded by the market at a reasonable cost. Modern technologies and innovative methods help to master this challenge. Until recently, production, from the design of the aluminum melting furnace to daily process, relied largely on traditional methods and experience. However, important data and information about the melting process—for example, the temperatures and the shape of the aluminum block in the furnace—can hardly be obtained with conventional experimental methods, as the temperatures exceed 700 °C. Therefore, this research project investigates the method of monitoring a melting process by means of optical sensors for the first time. The purpose of this paper is to predict the surface shape of the block during the melting process, as it is not possible to maintain a constant monitoring due to the heat and energy loss during measurement Behrens (Einsatz einer Lichtfeldkamera im Hochtemperaturbereich beim Schmelzvorgang von Aluminium, wt Werkstattstechnik online, 2016). To generate the necessary data, a 3D light-field camera is installed on top of an aluminum melting furnace in order to monitor the process. The basic idea is to find a general method for curve modeling from scattered range data on the aluminum surface in 3D space. By means of the (x, y, z) data from the 3D camera, the aluminum surface is modeled as a polynomial function with coefficient derived using various interpolation and approximation methods. This study presents an attempt to find the optimal polynomial function model that describes the aluminum surface during the melting process by interpolation or approximation methods. The best method for curve fitting will be extended and implemented for surface modeling. Based on this method, the melting process can be better controlled while the furnace operates continuously under stable conditions and the efficiency can therefore be increased. The proposed model can be modified for a wide variety of melting furnaces.

AB - Constantly increasing quality requirements and ever-stricter conditions pose difficult challenges for the foundry industry. They must produce the high-quality components demanded by the market at a reasonable cost. Modern technologies and innovative methods help to master this challenge. Until recently, production, from the design of the aluminum melting furnace to daily process, relied largely on traditional methods and experience. However, important data and information about the melting process—for example, the temperatures and the shape of the aluminum block in the furnace—can hardly be obtained with conventional experimental methods, as the temperatures exceed 700 °C. Therefore, this research project investigates the method of monitoring a melting process by means of optical sensors for the first time. The purpose of this paper is to predict the surface shape of the block during the melting process, as it is not possible to maintain a constant monitoring due to the heat and energy loss during measurement Behrens (Einsatz einer Lichtfeldkamera im Hochtemperaturbereich beim Schmelzvorgang von Aluminium, wt Werkstattstechnik online, 2016). To generate the necessary data, a 3D light-field camera is installed on top of an aluminum melting furnace in order to monitor the process. The basic idea is to find a general method for curve modeling from scattered range data on the aluminum surface in 3D space. By means of the (x, y, z) data from the 3D camera, the aluminum surface is modeled as a polynomial function with coefficient derived using various interpolation and approximation methods. This study presents an attempt to find the optimal polynomial function model that describes the aluminum surface during the melting process by interpolation or approximation methods. The best method for curve fitting will be extended and implemented for surface modeling. Based on this method, the melting process can be better controlled while the furnace operates continuously under stable conditions and the efficiency can therefore be increased. The proposed model can be modified for a wide variety of melting furnaces.

KW - Aluminum surface model

KW - Approximation

KW - Interpolation

KW - Light-field camera

KW - Melting process

KW - Polynomial function

UR - http://www.scopus.com/inward/record.url?scp=85046668235&partnerID=8YFLogxK

U2 - 10.1007/s11740-018-0831-2

DO - 10.1007/s11740-018-0831-2

M3 - Article

AN - SCOPUS:85046668235

VL - 12

SP - 679

EP - 689

JO - Production Engineering

JF - Production Engineering

SN - 0944-6524

IS - 5

ER -