Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 2085-2093 |
| Seitenumfang | 9 |
| Fachzeitschrift | International Journal of Advanced Manufacturing Technology |
| Jahrgang | 102 |
| Ausgabenummer | 5-8 |
| Frühes Online-Datum | 19 Jan. 2019 |
| Publikationsstatus | Veröffentlicht - 19 Juni 2019 |
Abstract
Dry diamond wire grinding of steel is associated with high tool wear restricting productivity as well as tool life. Therefore, the process has to be designed properly to ensure an economic cut. This paper introduces a process model for the dry diamond wire grinding of steel based on analytical and experimental results. The model describes fundamental influences of input parameters on mechanical and thermal tool loads by means of process kinematics and undeformed chip parameters. It is shown that tool temperatures are directly related to tangential grinding forces. The model is verified by experimental results showing high correlation of calculated and measured values.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Steuerungs- und Systemtechnik
- Informatik (insg.)
- Software
- Ingenieurwesen (insg.)
- Maschinenbau
- Informatik (insg.)
- Angewandte Informatik
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: International Journal of Advanced Manufacturing Technology, Jahrgang 102, Nr. 5-8, 19.06.2019, S. 2085-2093.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Model of tool loads in dry diamond wire grinding of steel
AU - Tatzig, L.
AU - Grove, T.
AU - Denkena, B.
N1 - Funding information: Funding information This work was supported by the German Federal Ministry of Education and Research (BMBF) [grant number 15S9134].
PY - 2019/6/19
Y1 - 2019/6/19
N2 - Dry diamond wire grinding of steel is associated with high tool wear restricting productivity as well as tool life. Therefore, the process has to be designed properly to ensure an economic cut. This paper introduces a process model for the dry diamond wire grinding of steel based on analytical and experimental results. The model describes fundamental influences of input parameters on mechanical and thermal tool loads by means of process kinematics and undeformed chip parameters. It is shown that tool temperatures are directly related to tangential grinding forces. The model is verified by experimental results showing high correlation of calculated and measured values.
AB - Dry diamond wire grinding of steel is associated with high tool wear restricting productivity as well as tool life. Therefore, the process has to be designed properly to ensure an economic cut. This paper introduces a process model for the dry diamond wire grinding of steel based on analytical and experimental results. The model describes fundamental influences of input parameters on mechanical and thermal tool loads by means of process kinematics and undeformed chip parameters. It is shown that tool temperatures are directly related to tangential grinding forces. The model is verified by experimental results showing high correlation of calculated and measured values.
KW - Diamond wire grinding
KW - Dry machining
KW - Grinding force
KW - Process modeling
KW - Steel
KW - Tool temperature
UR - http://www.scopus.com/inward/record.url?scp=85060259842&partnerID=8YFLogxK
U2 - 10.1007/s00170-018-03248-y
DO - 10.1007/s00170-018-03248-y
M3 - Article
AN - SCOPUS:85060259842
VL - 102
SP - 2085
EP - 2093
JO - International Journal of Advanced Manufacturing Technology
JF - International Journal of Advanced Manufacturing Technology
SN - 0268-3768
IS - 5-8
ER -