Micro-integrated optical systems and qualification of adhesive integration technologies for cold atomic quantum sensors

Publikation: Beitrag in Buch/Bericht/Sammelwerk/KonferenzbandAufsatz in KonferenzbandForschungPeer-Review

Autoren

Externe Organisationen

  • Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für Höchstfrequenztechnik (FBH)
  • Humboldt-Universität zu Berlin (HU Berlin)
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Titel des SammelwerksInternational Conference on Space Optics, ICSO 2022
Herausgeber/-innenKyriaki Minoglou, Nikos Karafolas, Bruno Cugny
Herausgeber (Verlag)SPIE
ISBN (elektronisch)978-151066803-4
PublikationsstatusVeröffentlicht - 12 Juli 2023
Veranstaltung2022 International Conference on Space Optics, ICSO 2022 - Dubrovnik, Kroatien
Dauer: 3 Okt. 20227 Okt. 2022

Publikationsreihe

NameProceedings of SPIE - The International Society for Optical Engineering
Band12777
ISSN (Print)0277-786X
ISSN (elektronisch)1996-756X

Abstract

Cold atom based quantum sensors require robust and miniaturized optical systems for applications on mobile platforms. A micro-integrated optical system (volume ∼25 mL) for trapping and manipulation of neutral atoms is presented. This setup focuses and precisely overlaps two high power laser beams (1064 nm, up to 2 W total, wR = 34 µm) launched via a single-mode, polarization maintaining optical fiber, thereby realizing a crossed beam optical dipole trap (ODT). Adhesive bonding is qualified in application relevant geometries and material systems of micro-integrated optical systems for application on mobile platforms or space. Fused silica test blocks (bond area 2 × 4 mm2) are bonded with four different adhesives on silicon wafers. Theses samples are aged by thermal cycling (up to −55 °C to 150 °C) and/or gamma-radiation (10 000 mSv) and subsequently the bond strength is evaluated by die shear testing according to MIL-STD-883L. The influence of the environmental aging on the bond strength is presented, the failure mode and the influence of fillets discussed. In addition, the effects of plasma cleaning on the bond strength in this geometry is presented.

ASJC Scopus Sachgebiete

Zitieren

Micro-integrated optical systems and qualification of adhesive integration technologies for cold atomic quantum sensors. / Christ, M.; Stiekel, A.; Stölmacker, C. et al.
International Conference on Space Optics, ICSO 2022. Hrsg. / Kyriaki Minoglou; Nikos Karafolas; Bruno Cugny. SPIE, 2023. 1277718 (Proceedings of SPIE - The International Society for Optical Engineering; Band 12777).

Publikation: Beitrag in Buch/Bericht/Sammelwerk/KonferenzbandAufsatz in KonferenzbandForschungPeer-Review

Christ, M, Stiekel, A, Stölmacker, C, Zimmermann, C, Kassner, A, Wurz, M & Krutzik, M 2023, Micro-integrated optical systems and qualification of adhesive integration technologies for cold atomic quantum sensors. in K Minoglou, N Karafolas & B Cugny (Hrsg.), International Conference on Space Optics, ICSO 2022., 1277718, Proceedings of SPIE - The International Society for Optical Engineering, Bd. 12777, SPIE, 2022 International Conference on Space Optics, ICSO 2022, Dubrovnik, Kroatien, 3 Okt. 2022. https://doi.org/10.1117/12.2689275
Christ, M., Stiekel, A., Stölmacker, C., Zimmermann, C., Kassner, A., Wurz, M., & Krutzik, M. (2023). Micro-integrated optical systems and qualification of adhesive integration technologies for cold atomic quantum sensors. In K. Minoglou, N. Karafolas, & B. Cugny (Hrsg.), International Conference on Space Optics, ICSO 2022 Artikel 1277718 (Proceedings of SPIE - The International Society for Optical Engineering; Band 12777). SPIE. https://doi.org/10.1117/12.2689275
Christ M, Stiekel A, Stölmacker C, Zimmermann C, Kassner A, Wurz M et al. Micro-integrated optical systems and qualification of adhesive integration technologies for cold atomic quantum sensors. in Minoglou K, Karafolas N, Cugny B, Hrsg., International Conference on Space Optics, ICSO 2022. SPIE. 2023. 1277718. (Proceedings of SPIE - The International Society for Optical Engineering). doi: 10.1117/12.2689275
Christ, M. ; Stiekel, A. ; Stölmacker, C. et al. / Micro-integrated optical systems and qualification of adhesive integration technologies for cold atomic quantum sensors. International Conference on Space Optics, ICSO 2022. Hrsg. / Kyriaki Minoglou ; Nikos Karafolas ; Bruno Cugny. SPIE, 2023. (Proceedings of SPIE - The International Society for Optical Engineering).
Download
@inproceedings{d6d9cef200f0438d89df3b8cccd3bda6,
title = "Micro-integrated optical systems and qualification of adhesive integration technologies for cold atomic quantum sensors",
abstract = "Cold atom based quantum sensors require robust and miniaturized optical systems for applications on mobile platforms. A micro-integrated optical system (volume ∼25 mL) for trapping and manipulation of neutral atoms is presented. This setup focuses and precisely overlaps two high power laser beams (1064 nm, up to 2 W total, wR = 34 µm) launched via a single-mode, polarization maintaining optical fiber, thereby realizing a crossed beam optical dipole trap (ODT). Adhesive bonding is qualified in application relevant geometries and material systems of micro-integrated optical systems for application on mobile platforms or space. Fused silica test blocks (bond area 2 × 4 mm2) are bonded with four different adhesives on silicon wafers. Theses samples are aged by thermal cycling (up to −55 °C to 150 °C) and/or gamma-radiation (10 000 mSv) and subsequently the bond strength is evaluated by die shear testing according to MIL-STD-883L. The influence of the environmental aging on the bond strength is presented, the failure mode and the influence of fillets discussed. In addition, the effects of plasma cleaning on the bond strength in this geometry is presented.",
keywords = "adhesive bonding, environmental qualification, integrated quantum sensors, micro-integration, miniaturization, optical dipole trap, optical systems, plasma cleaning, radiation, thermal cycling",
author = "M. Christ and A. Stiekel and C. St{\"o}lmacker and C. Zimmermann and A. Kassner and M. Wurz and M. Krutzik",
note = "Funding Information: This work is supported by the German Space Agency (DLR) with funds provided by the Federal Ministry for Economic Affairs and Climate Action (BMWK) due to an enactment of the German Bundestag under grant number 50WM1949 and 50RK1978. Funding Information: We thank Robert Smol, Max Schiemangk and Andreas Wicht from the Joint Lab Quantum Photonic Components at FBH for their support and the provision of the micro-integration setup. We also thank Johannes Zender and Ulrike Winterwerber from the Prototype Engineering Lab at FBH for the provision of the µPQ plasma source for this work. This work is supported by the German Space Agency (DLR) with funds provided by the Federal Ministry for Economic Affairs and Climate Action (BMWK) due to an enactment of the German Bundestag under grant number 50WM1949 and 50RK1978. ; 2022 International Conference on Space Optics, ICSO 2022 ; Conference date: 03-10-2022 Through 07-10-2022",
year = "2023",
month = jul,
day = "12",
doi = "10.1117/12.2689275",
language = "English",
series = "Proceedings of SPIE - The International Society for Optical Engineering",
publisher = "SPIE",
editor = "Kyriaki Minoglou and Nikos Karafolas and Bruno Cugny",
booktitle = "International Conference on Space Optics, ICSO 2022",
address = "United States",

}

Download

TY - GEN

T1 - Micro-integrated optical systems and qualification of adhesive integration technologies for cold atomic quantum sensors

AU - Christ, M.

AU - Stiekel, A.

AU - Stölmacker, C.

AU - Zimmermann, C.

AU - Kassner, A.

AU - Wurz, M.

AU - Krutzik, M.

N1 - Funding Information: This work is supported by the German Space Agency (DLR) with funds provided by the Federal Ministry for Economic Affairs and Climate Action (BMWK) due to an enactment of the German Bundestag under grant number 50WM1949 and 50RK1978. Funding Information: We thank Robert Smol, Max Schiemangk and Andreas Wicht from the Joint Lab Quantum Photonic Components at FBH for their support and the provision of the micro-integration setup. We also thank Johannes Zender and Ulrike Winterwerber from the Prototype Engineering Lab at FBH for the provision of the µPQ plasma source for this work. This work is supported by the German Space Agency (DLR) with funds provided by the Federal Ministry for Economic Affairs and Climate Action (BMWK) due to an enactment of the German Bundestag under grant number 50WM1949 and 50RK1978.

PY - 2023/7/12

Y1 - 2023/7/12

N2 - Cold atom based quantum sensors require robust and miniaturized optical systems for applications on mobile platforms. A micro-integrated optical system (volume ∼25 mL) for trapping and manipulation of neutral atoms is presented. This setup focuses and precisely overlaps two high power laser beams (1064 nm, up to 2 W total, wR = 34 µm) launched via a single-mode, polarization maintaining optical fiber, thereby realizing a crossed beam optical dipole trap (ODT). Adhesive bonding is qualified in application relevant geometries and material systems of micro-integrated optical systems for application on mobile platforms or space. Fused silica test blocks (bond area 2 × 4 mm2) are bonded with four different adhesives on silicon wafers. Theses samples are aged by thermal cycling (up to −55 °C to 150 °C) and/or gamma-radiation (10 000 mSv) and subsequently the bond strength is evaluated by die shear testing according to MIL-STD-883L. The influence of the environmental aging on the bond strength is presented, the failure mode and the influence of fillets discussed. In addition, the effects of plasma cleaning on the bond strength in this geometry is presented.

AB - Cold atom based quantum sensors require robust and miniaturized optical systems for applications on mobile platforms. A micro-integrated optical system (volume ∼25 mL) for trapping and manipulation of neutral atoms is presented. This setup focuses and precisely overlaps two high power laser beams (1064 nm, up to 2 W total, wR = 34 µm) launched via a single-mode, polarization maintaining optical fiber, thereby realizing a crossed beam optical dipole trap (ODT). Adhesive bonding is qualified in application relevant geometries and material systems of micro-integrated optical systems for application on mobile platforms or space. Fused silica test blocks (bond area 2 × 4 mm2) are bonded with four different adhesives on silicon wafers. Theses samples are aged by thermal cycling (up to −55 °C to 150 °C) and/or gamma-radiation (10 000 mSv) and subsequently the bond strength is evaluated by die shear testing according to MIL-STD-883L. The influence of the environmental aging on the bond strength is presented, the failure mode and the influence of fillets discussed. In addition, the effects of plasma cleaning on the bond strength in this geometry is presented.

KW - adhesive bonding

KW - environmental qualification

KW - integrated quantum sensors

KW - micro-integration

KW - miniaturization

KW - optical dipole trap

KW - optical systems

KW - plasma cleaning

KW - radiation

KW - thermal cycling

UR - http://www.scopus.com/inward/record.url?scp=85174059253&partnerID=8YFLogxK

U2 - 10.1117/12.2689275

DO - 10.1117/12.2689275

M3 - Conference contribution

AN - SCOPUS:85174059253

T3 - Proceedings of SPIE - The International Society for Optical Engineering

BT - International Conference on Space Optics, ICSO 2022

A2 - Minoglou, Kyriaki

A2 - Karafolas, Nikos

A2 - Cugny, Bruno

PB - SPIE

T2 - 2022 International Conference on Space Optics, ICSO 2022

Y2 - 3 October 2022 through 7 October 2022

ER -

Von denselben Autoren