Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010 |
| Herausgeber/-innen | P. Shore, Theresa Burke, Henny Spaan, H. Van Brussel |
| Seiten | 225-228 |
| Seitenumfang | 4 |
| ISBN (elektronisch) | 9780955308284 |
| Publikationsstatus | Veröffentlicht - 31 Mai 2010 |
| Veranstaltung | 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010 - Delft, Niederlande Dauer: 31 Mai 2010 → 4 Juni 2010 |
Publikationsreihe
| Name | Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010 |
|---|---|
| Band | 2 |
Abstract
The precision of machine tools has continuously advanced due to the integration of optimized sensor and actuator systems. Nevertheless, the clamping of workpieces especially in turning chucks is usually effected by solely mechanic solutions. This offers the possibility of a significant increase of clamping- and positioning accuracy by application of mechatronical approach. This paper presents such a novel chuck concept. By the integration of mechatronic elements, the workpiece can be aligned in four degrees of freedom after being clamped in the machine tool. The aim of the mechatronic chuck is to increase the clamp repeat accuracy, to reduce the allowance of a part and to shorten the cutting time. The possibility of the alignment of big gears by such chuck systems (as needed for example in wind power plants) is presented.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
- Werkstoffwissenschaften (insg.)
- Allgemeine Materialwissenschaften
- Umweltwissenschaften (insg.)
- Environmental engineering
- Ingenieurwesen (insg.)
- Maschinenbau
- Physik und Astronomie (insg.)
- Instrumentierung
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010. Hrsg. / P. Shore; Theresa Burke; Henny Spaan; H. Van Brussel. 2010. S. 225-228 (Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010; Band 2).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Mechatronic Chuck with 4 Degrees of Freedom Precision Positioning
AU - Denkena, B.
AU - Immel, J.
AU - Gümmer, O.
PY - 2010/5/31
Y1 - 2010/5/31
N2 - The precision of machine tools has continuously advanced due to the integration of optimized sensor and actuator systems. Nevertheless, the clamping of workpieces especially in turning chucks is usually effected by solely mechanic solutions. This offers the possibility of a significant increase of clamping- and positioning accuracy by application of mechatronical approach. This paper presents such a novel chuck concept. By the integration of mechatronic elements, the workpiece can be aligned in four degrees of freedom after being clamped in the machine tool. The aim of the mechatronic chuck is to increase the clamp repeat accuracy, to reduce the allowance of a part and to shorten the cutting time. The possibility of the alignment of big gears by such chuck systems (as needed for example in wind power plants) is presented.
AB - The precision of machine tools has continuously advanced due to the integration of optimized sensor and actuator systems. Nevertheless, the clamping of workpieces especially in turning chucks is usually effected by solely mechanic solutions. This offers the possibility of a significant increase of clamping- and positioning accuracy by application of mechatronical approach. This paper presents such a novel chuck concept. By the integration of mechatronic elements, the workpiece can be aligned in four degrees of freedom after being clamped in the machine tool. The aim of the mechatronic chuck is to increase the clamp repeat accuracy, to reduce the allowance of a part and to shorten the cutting time. The possibility of the alignment of big gears by such chuck systems (as needed for example in wind power plants) is presented.
UR - http://www.scopus.com/inward/record.url?scp=84911365921&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:84911365921
T3 - Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010
SP - 225
EP - 228
BT - Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010
A2 - Shore, P.
A2 - Burke, Theresa
A2 - Spaan, Henny
A2 - Van Brussel, H.
T2 - 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010
Y2 - 31 May 2010 through 4 June 2010
ER -