Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Sheet Metal 2015 |
| Herausgeber/-innen | Marion Merklein, J. Duflou, Alan G Leacock, F. Micari, Hinnerk Hagenah |
| Seiten | 291-298 |
| Seitenumfang | 8 |
| ISBN (elektronisch) | 9783038354505 |
| Publikationsstatus | Veröffentlicht - 20 März 2015 |
| Veranstaltung | 16th International Conference on Sheet Metal, SheMet 2015 - Erlangen-Nurnberg, Deutschland Dauer: 16 März 2015 → 18 März 2015 |
Publikationsreihe
| Name | Key Engineering Materials |
|---|---|
| Band | 639 |
| ISSN (Print) | 1013-9826 |
| ISSN (elektronisch) | 1662-9795 |
Abstract
In order to fulfil today's demands on fast, efficient and sustainable production processes the sheet-bulk metal forming is being developed as a new forming technology within the scope of the SFB/Transregio 73. Characteristically for the sheet bulk metal forming is a three dimensional material flow, which allows for extensive freedom in the design process. To ensure maintaining all the advantages, provided by sheet-bulk metal forming, new inspection concepts for the produced parts as well as for the forming tools have to be developed. For a production-related inspection of produced parts a multi-sensor fringe projection system is under development, which will be employed to detect deviations of features' form and size. With its sensors of varying measuring range and resolution a feature adapted inspection is possible. Additionally an optical fibre sensor is projected to detect small parts of interest in a very high resolution to enhance the possibilities of the multiscale multi-sensor system. A newly developed endoscopic fringe projection system is used to inspect parts that are out of reach for common optical measuring systems such as the forming tool of the process. This allows for a continuous measurement of tool features and thus the detection of slow growing wear. Challenging for measurement tasks in the sheet-bulk metal forming process are not only the complex geometries but also the harsh environmental conditions and especially for the parts' inspection, the different surface parameters. In this article the surface parameters of the some sheet-bulk metal formed parts and forming tools will be explained, followed by a description of the different measuring systems. Finally an exemplary evaluation of the influence of the surface properties on an optical measuring system will be shown.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Allgemeine Materialwissenschaften
- Ingenieurwesen (insg.)
- Werkstoffmechanik
- Ingenieurwesen (insg.)
- Maschinenbau
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Sheet Metal 2015. Hrsg. / Marion Merklein; J. Duflou; Alan G Leacock; F. Micari; Hinnerk Hagenah. 2015. S. 291-298 (Key Engineering Materials; Band 639).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Measuring systems for sheet-bulk metal forming
AU - Loderer, Andreas
AU - Timmermann, Martin
AU - Matthias, Steffen
AU - Kästner, Markus
AU - Schneider, Thomas
AU - Hausotte, Tino
AU - Reithmeier, Eduard
PY - 2015/3/20
Y1 - 2015/3/20
N2 - In order to fulfil today's demands on fast, efficient and sustainable production processes the sheet-bulk metal forming is being developed as a new forming technology within the scope of the SFB/Transregio 73. Characteristically for the sheet bulk metal forming is a three dimensional material flow, which allows for extensive freedom in the design process. To ensure maintaining all the advantages, provided by sheet-bulk metal forming, new inspection concepts for the produced parts as well as for the forming tools have to be developed. For a production-related inspection of produced parts a multi-sensor fringe projection system is under development, which will be employed to detect deviations of features' form and size. With its sensors of varying measuring range and resolution a feature adapted inspection is possible. Additionally an optical fibre sensor is projected to detect small parts of interest in a very high resolution to enhance the possibilities of the multiscale multi-sensor system. A newly developed endoscopic fringe projection system is used to inspect parts that are out of reach for common optical measuring systems such as the forming tool of the process. This allows for a continuous measurement of tool features and thus the detection of slow growing wear. Challenging for measurement tasks in the sheet-bulk metal forming process are not only the complex geometries but also the harsh environmental conditions and especially for the parts' inspection, the different surface parameters. In this article the surface parameters of the some sheet-bulk metal formed parts and forming tools will be explained, followed by a description of the different measuring systems. Finally an exemplary evaluation of the influence of the surface properties on an optical measuring system will be shown.
AB - In order to fulfil today's demands on fast, efficient and sustainable production processes the sheet-bulk metal forming is being developed as a new forming technology within the scope of the SFB/Transregio 73. Characteristically for the sheet bulk metal forming is a three dimensional material flow, which allows for extensive freedom in the design process. To ensure maintaining all the advantages, provided by sheet-bulk metal forming, new inspection concepts for the produced parts as well as for the forming tools have to be developed. For a production-related inspection of produced parts a multi-sensor fringe projection system is under development, which will be employed to detect deviations of features' form and size. With its sensors of varying measuring range and resolution a feature adapted inspection is possible. Additionally an optical fibre sensor is projected to detect small parts of interest in a very high resolution to enhance the possibilities of the multiscale multi-sensor system. A newly developed endoscopic fringe projection system is used to inspect parts that are out of reach for common optical measuring systems such as the forming tool of the process. This allows for a continuous measurement of tool features and thus the detection of slow growing wear. Challenging for measurement tasks in the sheet-bulk metal forming process are not only the complex geometries but also the harsh environmental conditions and especially for the parts' inspection, the different surface parameters. In this article the surface parameters of the some sheet-bulk metal formed parts and forming tools will be explained, followed by a description of the different measuring systems. Finally an exemplary evaluation of the influence of the surface properties on an optical measuring system will be shown.
KW - Measurement
KW - Metal forming
KW - Surface analysis
UR - http://www.scopus.com/inward/record.url?scp=84930152747&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/KEM.639.291
DO - 10.4028/www.scientific.net/KEM.639.291
M3 - Conference contribution
AN - SCOPUS:84930152747
T3 - Key Engineering Materials
SP - 291
EP - 298
BT - Sheet Metal 2015
A2 - Merklein, Marion
A2 - Duflou, J.
A2 - Leacock, Alan G
A2 - Micari, F.
A2 - Hagenah, Hinnerk
T2 - 16th International Conference on Sheet Metal, SheMet 2015
Y2 - 16 March 2015 through 18 March 2015
ER -