Measuring system based on modern signal processing methods for partial discharge recognition and localization on-site

Publikation: Beitrag in FachzeitschriftKonferenzaufsatz in FachzeitschriftForschungPeer-Review

Autoren

  • D. Wenzel
  • H. Borsi
  • Ernst Gockenbach
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)20-23
Seitenumfang4
FachzeitschriftConference Record of IEEE International Symposium on Electrical Insulation
Jahrgang1
PublikationsstatusVeröffentlicht - 1998
Veranstaltung1998 IEEE International Symposium on Electrical Insulation. Part 1 (of 2) - Arlington, VA, USA
Dauer: 7 Juni 199810 Juni 1998

Abstract

The paper describes a modular structured measuring system for Partial Discharge (PD) recognition and localization on-site. The appearing noises are suppressed digitally with different filter algorithms each being best adapted to the respective noise signals. The suppression of sinusoidal continuous noises is realized by means of digital filters, whereas synchronous pulse shaped noises are eliminated by using adaptive correlation algorithms. A separation of the PD from noise pulses with stochastical appearance is performed with pattern recognition algorithms. Investigations of pulses measured exemplarily on transformers show, that the simultaneous employment of several algorithms leads to an increasing of the reliability of the evaluation. Also, a monitoring operation without any a priori knowledge about appearing signal shapes becomes possible. Besides the noise suppression, the same pattern recognition algorithms with changed parameters make a contribution to a localization of PD faults.

ASJC Scopus Sachgebiete

Zitieren

Measuring system based on modern signal processing methods for partial discharge recognition and localization on-site. / Wenzel, D.; Borsi, H.; Gockenbach, Ernst.
in: Conference Record of IEEE International Symposium on Electrical Insulation, Jahrgang 1, 1998, S. 20-23.

Publikation: Beitrag in FachzeitschriftKonferenzaufsatz in FachzeitschriftForschungPeer-Review

Wenzel, D, Borsi, H & Gockenbach, E 1998, 'Measuring system based on modern signal processing methods for partial discharge recognition and localization on-site', Conference Record of IEEE International Symposium on Electrical Insulation, Jg. 1, S. 20-23.
Wenzel, D., Borsi, H., & Gockenbach, E. (1998). Measuring system based on modern signal processing methods for partial discharge recognition and localization on-site. Conference Record of IEEE International Symposium on Electrical Insulation, 1, 20-23.
Wenzel D, Borsi H, Gockenbach E. Measuring system based on modern signal processing methods for partial discharge recognition and localization on-site. Conference Record of IEEE International Symposium on Electrical Insulation. 1998;1:20-23.
Wenzel, D. ; Borsi, H. ; Gockenbach, Ernst. / Measuring system based on modern signal processing methods for partial discharge recognition and localization on-site. in: Conference Record of IEEE International Symposium on Electrical Insulation. 1998 ; Jahrgang 1. S. 20-23.
Download
@article{8039e870cfd648b99f348690d0c72adf,
title = "Measuring system based on modern signal processing methods for partial discharge recognition and localization on-site",
abstract = "The paper describes a modular structured measuring system for Partial Discharge (PD) recognition and localization on-site. The appearing noises are suppressed digitally with different filter algorithms each being best adapted to the respective noise signals. The suppression of sinusoidal continuous noises is realized by means of digital filters, whereas synchronous pulse shaped noises are eliminated by using adaptive correlation algorithms. A separation of the PD from noise pulses with stochastical appearance is performed with pattern recognition algorithms. Investigations of pulses measured exemplarily on transformers show, that the simultaneous employment of several algorithms leads to an increasing of the reliability of the evaluation. Also, a monitoring operation without any a priori knowledge about appearing signal shapes becomes possible. Besides the noise suppression, the same pattern recognition algorithms with changed parameters make a contribution to a localization of PD faults.",
author = "D. Wenzel and H. Borsi and Ernst Gockenbach",
note = "Copyright: Copyright 2004 Elsevier Science B.V., Amsterdam. All rights reserved.; 1998 IEEE International Symposium on Electrical Insulation. Part 1 (of 2) ; Conference date: 07-06-1998 Through 10-06-1998",
year = "1998",
language = "English",
volume = "1",
pages = "20--23",

}

Download

TY - JOUR

T1 - Measuring system based on modern signal processing methods for partial discharge recognition and localization on-site

AU - Wenzel, D.

AU - Borsi, H.

AU - Gockenbach, Ernst

N1 - Copyright: Copyright 2004 Elsevier Science B.V., Amsterdam. All rights reserved.

PY - 1998

Y1 - 1998

N2 - The paper describes a modular structured measuring system for Partial Discharge (PD) recognition and localization on-site. The appearing noises are suppressed digitally with different filter algorithms each being best adapted to the respective noise signals. The suppression of sinusoidal continuous noises is realized by means of digital filters, whereas synchronous pulse shaped noises are eliminated by using adaptive correlation algorithms. A separation of the PD from noise pulses with stochastical appearance is performed with pattern recognition algorithms. Investigations of pulses measured exemplarily on transformers show, that the simultaneous employment of several algorithms leads to an increasing of the reliability of the evaluation. Also, a monitoring operation without any a priori knowledge about appearing signal shapes becomes possible. Besides the noise suppression, the same pattern recognition algorithms with changed parameters make a contribution to a localization of PD faults.

AB - The paper describes a modular structured measuring system for Partial Discharge (PD) recognition and localization on-site. The appearing noises are suppressed digitally with different filter algorithms each being best adapted to the respective noise signals. The suppression of sinusoidal continuous noises is realized by means of digital filters, whereas synchronous pulse shaped noises are eliminated by using adaptive correlation algorithms. A separation of the PD from noise pulses with stochastical appearance is performed with pattern recognition algorithms. Investigations of pulses measured exemplarily on transformers show, that the simultaneous employment of several algorithms leads to an increasing of the reliability of the evaluation. Also, a monitoring operation without any a priori knowledge about appearing signal shapes becomes possible. Besides the noise suppression, the same pattern recognition algorithms with changed parameters make a contribution to a localization of PD faults.

UR - http://www.scopus.com/inward/record.url?scp=0031640034&partnerID=8YFLogxK

M3 - Conference article

AN - SCOPUS:0031640034

VL - 1

SP - 20

EP - 23

JO - Conference Record of IEEE International Symposium on Electrical Insulation

JF - Conference Record of IEEE International Symposium on Electrical Insulation

SN - 0164-2006

T2 - 1998 IEEE International Symposium on Electrical Insulation. Part 1 (of 2)

Y2 - 7 June 1998 through 10 June 1998

ER -