Magnetic properties of nanostructured MnZn ferrite

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

  • Mohammad Javad Nasr Isfaham
  • Maxym Myndyk
  • Dirk Menzel
  • Armin Feldhoff
  • Jamshid Amighian
  • Vladimir Šepelák

Externe Organisationen

  • University of Isfahan
  • Technische Universität Braunschweig
  • Slovak Academy of Sciences
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)152-156
Seitenumfang5
FachzeitschriftJournal of Magnetism and Magnetic Materials
Jahrgang321
Ausgabenummer3
Frühes Online-Datum14 Aug. 2008
PublikationsstatusVeröffentlicht - Feb. 2009

Abstract

Mn0.5Zn0.5Fe2O4 nanoparticles (10-30 nm) have been prepared via mechanochemical processing, using a mixture of two single-phase ferrites, MnFe2O4 and ZnFe 2O4. SQUID measurements (field-cooled magnetization curves and hysteresis loops) were performed to follow the mechanically induced evolution of the MnFe2O4/ZnFe2O4 mixture submitted to the high-energy milling process. The resulting single MnZn nanoferrite phase was characterized by SQUID (M-H curve), Faraday balance (M-T curve) and transmission electron microscopy. The magnetic characteristics of the mechanosynthesized material were compared with those of bulk Mn 0.5Zn0.5Fe2O4. It was found that the saturation magnetization of nanostructured Mn0.5Zn a5Fe2O4 (87.2emu/g) is lower than that of the bulk Mn0.5Zna5Fe2O4, but, the Neel temperature of the sample (583 K) is higher than that of the bulk Mn 0.5Zn0.5Fe2O4.

ASJC Scopus Sachgebiete

Zitieren

Magnetic properties of nanostructured MnZn ferrite. / Isfaham, Mohammad Javad Nasr; Myndyk, Maxym; Menzel, Dirk et al.
in: Journal of Magnetism and Magnetic Materials, Jahrgang 321, Nr. 3, 02.2009, S. 152-156.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Isfaham, MJN, Myndyk, M, Menzel, D, Feldhoff, A, Amighian, J & Šepelák, V 2009, 'Magnetic properties of nanostructured MnZn ferrite', Journal of Magnetism and Magnetic Materials, Jg. 321, Nr. 3, S. 152-156. https://doi.org/10.1016/j.jmmm.2008.08.054
Isfaham, M. J. N., Myndyk, M., Menzel, D., Feldhoff, A., Amighian, J., & Šepelák, V. (2009). Magnetic properties of nanostructured MnZn ferrite. Journal of Magnetism and Magnetic Materials, 321(3), 152-156. https://doi.org/10.1016/j.jmmm.2008.08.054
Isfaham MJN, Myndyk M, Menzel D, Feldhoff A, Amighian J, Šepelák V. Magnetic properties of nanostructured MnZn ferrite. Journal of Magnetism and Magnetic Materials. 2009 Feb;321(3):152-156. Epub 2008 Aug 14. doi: 10.1016/j.jmmm.2008.08.054
Isfaham, Mohammad Javad Nasr ; Myndyk, Maxym ; Menzel, Dirk et al. / Magnetic properties of nanostructured MnZn ferrite. in: Journal of Magnetism and Magnetic Materials. 2009 ; Jahrgang 321, Nr. 3. S. 152-156.
Download
@article{9ded69eda643492c818949857bb86ff3,
title = "Magnetic properties of nanostructured MnZn ferrite",
abstract = "Mn0.5Zn0.5Fe2O4 nanoparticles (10-30 nm) have been prepared via mechanochemical processing, using a mixture of two single-phase ferrites, MnFe2O4 and ZnFe 2O4. SQUID measurements (field-cooled magnetization curves and hysteresis loops) were performed to follow the mechanically induced evolution of the MnFe2O4/ZnFe2O4 mixture submitted to the high-energy milling process. The resulting single MnZn nanoferrite phase was characterized by SQUID (M-H curve), Faraday balance (M-T curve) and transmission electron microscopy. The magnetic characteristics of the mechanosynthesized material were compared with those of bulk Mn 0.5Zn0.5Fe2O4. It was found that the saturation magnetization of nanostructured Mn0.5Zn a5Fe2O4 (87.2emu/g) is lower than that of the bulk Mn0.5Zna5Fe2O4, but, the Neel temperature of the sample (583 K) is higher than that of the bulk Mn 0.5Zn0.5Fe2O4.",
keywords = "Ferrimagnetics, Magnetic properties, Mechanochemical processing, Nanocrystalline materials",
author = "Isfaham, {Mohammad Javad Nasr} and Maxym Myndyk and Dirk Menzel and Armin Feldhoff and Jamshid Amighian and Vladimir {\v S}epel{\'a}k",
note = "Funding Information: The authors (M.J.N.I. and J.A.) would like to thank the Office of Graduate Studies of the University of Isfahan. V.{\v S}. gratefully acknowledges the support by the DFG, APVV (Project 0728-07) and VEGA (Grant 2/0065/08).",
year = "2009",
month = feb,
doi = "10.1016/j.jmmm.2008.08.054",
language = "English",
volume = "321",
pages = "152--156",
journal = "Journal of Magnetism and Magnetic Materials",
issn = "0304-8853",
publisher = "Elsevier",
number = "3",

}

Download

TY - JOUR

T1 - Magnetic properties of nanostructured MnZn ferrite

AU - Isfaham, Mohammad Javad Nasr

AU - Myndyk, Maxym

AU - Menzel, Dirk

AU - Feldhoff, Armin

AU - Amighian, Jamshid

AU - Šepelák, Vladimir

N1 - Funding Information: The authors (M.J.N.I. and J.A.) would like to thank the Office of Graduate Studies of the University of Isfahan. V.Š. gratefully acknowledges the support by the DFG, APVV (Project 0728-07) and VEGA (Grant 2/0065/08).

PY - 2009/2

Y1 - 2009/2

N2 - Mn0.5Zn0.5Fe2O4 nanoparticles (10-30 nm) have been prepared via mechanochemical processing, using a mixture of two single-phase ferrites, MnFe2O4 and ZnFe 2O4. SQUID measurements (field-cooled magnetization curves and hysteresis loops) were performed to follow the mechanically induced evolution of the MnFe2O4/ZnFe2O4 mixture submitted to the high-energy milling process. The resulting single MnZn nanoferrite phase was characterized by SQUID (M-H curve), Faraday balance (M-T curve) and transmission electron microscopy. The magnetic characteristics of the mechanosynthesized material were compared with those of bulk Mn 0.5Zn0.5Fe2O4. It was found that the saturation magnetization of nanostructured Mn0.5Zn a5Fe2O4 (87.2emu/g) is lower than that of the bulk Mn0.5Zna5Fe2O4, but, the Neel temperature of the sample (583 K) is higher than that of the bulk Mn 0.5Zn0.5Fe2O4.

AB - Mn0.5Zn0.5Fe2O4 nanoparticles (10-30 nm) have been prepared via mechanochemical processing, using a mixture of two single-phase ferrites, MnFe2O4 and ZnFe 2O4. SQUID measurements (field-cooled magnetization curves and hysteresis loops) were performed to follow the mechanically induced evolution of the MnFe2O4/ZnFe2O4 mixture submitted to the high-energy milling process. The resulting single MnZn nanoferrite phase was characterized by SQUID (M-H curve), Faraday balance (M-T curve) and transmission electron microscopy. The magnetic characteristics of the mechanosynthesized material were compared with those of bulk Mn 0.5Zn0.5Fe2O4. It was found that the saturation magnetization of nanostructured Mn0.5Zn a5Fe2O4 (87.2emu/g) is lower than that of the bulk Mn0.5Zna5Fe2O4, but, the Neel temperature of the sample (583 K) is higher than that of the bulk Mn 0.5Zn0.5Fe2O4.

KW - Ferrimagnetics

KW - Magnetic properties

KW - Mechanochemical processing

KW - Nanocrystalline materials

UR - http://www.scopus.com/inward/record.url?scp=56749131866&partnerID=8YFLogxK

U2 - 10.1016/j.jmmm.2008.08.054

DO - 10.1016/j.jmmm.2008.08.054

M3 - Article

AN - SCOPUS:56749131866

VL - 321

SP - 152

EP - 156

JO - Journal of Magnetism and Magnetic Materials

JF - Journal of Magnetism and Magnetic Materials

SN - 0304-8853

IS - 3

ER -