Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 496-500 |
| Seitenumfang | 5 |
| Fachzeitschrift | Procedia CIRP |
| Jahrgang | 111 |
| Frühes Online-Datum | 6 Sept. 2022 |
| Publikationsstatus | Veröffentlicht - 2022 |
| Veranstaltung | 12th CIRP Conference on Photonic Technologies, LANE 2022 - Erlangen, Deutschland Dauer: 4 Sept. 2022 → 8 Sept. 2022 |
Abstract
Laser cutting of carbon fibre reinforced plastics (CFRP) has shown promising potential as an alternative to conventional manufacturing processes. Laser cutting has major benefits of contactless and therefore wear-free machining and high automation potential. The main challenge is to reduce the heat input into the material during the process. Excessive temperatures cause damage within the surrounding matrix material and could locally modify the structural properties of the CFRP. For industrial use it is necessary to be able to predict the resulting temperature fields. To gain knowledge of the temperature distribution during the process, a three-dimensional macroscopic finite element model is developed using ANSYS simulation software. Transient-thermal analyses are performed and the material removal process is implemented via the element-death technique. Simulations are run for a unidirectional composite structure and different cutting speeds. The resulting temperatures are compared to experimental data.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Steuerungs- und Systemtechnik
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Procedia CIRP, Jahrgang 111, 2022, S. 496-500.
Publikation: Beitrag in Fachzeitschrift › Konferenzaufsatz in Fachzeitschrift › Forschung › Peer-Review
}
TY - JOUR
T1 - Macroscopic simulation model for laser cutting of carbon fibre reinforced plastics
AU - Keuntje, Jan
AU - Mrzljak, Selim
AU - Gerdes, Lars
AU - Wippo, Verena
AU - Kaierle, Stefan
AU - Overmeyer, Ludger
AU - Walther, Frank
AU - Jaeschke, Peter
N1 - Funding Information: The authors gratefully acknowledge the funding by the German Research Foundation (Deutsche Forschungs-gemeinschaft, DFG) of the project “ Characterization and modelling of the laser based separation process and resulting damage mechanisms of carbon fibre-reinforced plastics under fatigue loading” (project number 436398518).
PY - 2022
Y1 - 2022
N2 - Laser cutting of carbon fibre reinforced plastics (CFRP) has shown promising potential as an alternative to conventional manufacturing processes. Laser cutting has major benefits of contactless and therefore wear-free machining and high automation potential. The main challenge is to reduce the heat input into the material during the process. Excessive temperatures cause damage within the surrounding matrix material and could locally modify the structural properties of the CFRP. For industrial use it is necessary to be able to predict the resulting temperature fields. To gain knowledge of the temperature distribution during the process, a three-dimensional macroscopic finite element model is developed using ANSYS simulation software. Transient-thermal analyses are performed and the material removal process is implemented via the element-death technique. Simulations are run for a unidirectional composite structure and different cutting speeds. The resulting temperatures are compared to experimental data.
AB - Laser cutting of carbon fibre reinforced plastics (CFRP) has shown promising potential as an alternative to conventional manufacturing processes. Laser cutting has major benefits of contactless and therefore wear-free machining and high automation potential. The main challenge is to reduce the heat input into the material during the process. Excessive temperatures cause damage within the surrounding matrix material and could locally modify the structural properties of the CFRP. For industrial use it is necessary to be able to predict the resulting temperature fields. To gain knowledge of the temperature distribution during the process, a three-dimensional macroscopic finite element model is developed using ANSYS simulation software. Transient-thermal analyses are performed and the material removal process is implemented via the element-death technique. Simulations are run for a unidirectional composite structure and different cutting speeds. The resulting temperatures are compared to experimental data.
KW - carbon fibre reinforced plastics
KW - finite element method
KW - heat affected zone
KW - laser cutting simulation
UR - http://www.scopus.com/inward/record.url?scp=85141898403&partnerID=8YFLogxK
U2 - 10.1016/j.procir.2022.08.078
DO - 10.1016/j.procir.2022.08.078
M3 - Conference article
AN - SCOPUS:85141898403
VL - 111
SP - 496
EP - 500
JO - Procedia CIRP
JF - Procedia CIRP
SN - 2212-8271
T2 - 12th CIRP Conference on Photonic Technologies, LANE 2022
Y2 - 4 September 2022 through 8 September 2022
ER -