TY - GEN

T1 - Localization of Deviations in Cable Geometry Using FDA Fault Localization Method

AU - Norouzi, Younes

AU - Frohne, C.

AU - Rothfeld, J.

AU - Werle, Peter

N1 - Funding Information: Acknowledgements. The authors gratefully acknowledge funding by the (BMBF) within the Kopernikus Project ENSURE ‘New ENergy grid StructURes for the German Energiewende’.

PY - 2020

Y1 - 2020

N2 - Frequency domain analysis (FDA) is a possible method to detect, classify, and localize the faults in cable systems. This method extracts the frequency response of the cable by applying a sweep voltage. Principle of this method is based on transmission line theory and could detect changes in the core, conducting screen, semi-conductor layers, and especially changes in the insulation bulk. Changes in the insulation of a cable alters its electrical parameters, which leads to a deviation in the frequency response of the damaged cable compared to the response of a healthy cable system. It is common to consider faults in cables just as a resistive fault, but in reality, most of the faults in cables cause a deviation in geometry of the cable at the fault position. This can be interpreted as a change in the capacitance, inductance, and conductance of the cable. These variations in the cable parameters must be taken into account to localize the faults precisely. In this contribution, the sensitivity of the FDA method to the abnormalities and deviations in the cable geometry is demonstrated. Several measurements on a long MV cable were performed to examine the sensitivity of the FDA method in real cases. The used MV cable is damaged and a small part of its geometry is slightly deviated, which could not be detected using common fault localization methods, e.g., time domain reflectometry (TDR). The FDA method however, was applied and could successfully detect and localize the change in the cable geometry.

AB - Frequency domain analysis (FDA) is a possible method to detect, classify, and localize the faults in cable systems. This method extracts the frequency response of the cable by applying a sweep voltage. Principle of this method is based on transmission line theory and could detect changes in the core, conducting screen, semi-conductor layers, and especially changes in the insulation bulk. Changes in the insulation of a cable alters its electrical parameters, which leads to a deviation in the frequency response of the damaged cable compared to the response of a healthy cable system. It is common to consider faults in cables just as a resistive fault, but in reality, most of the faults in cables cause a deviation in geometry of the cable at the fault position. This can be interpreted as a change in the capacitance, inductance, and conductance of the cable. These variations in the cable parameters must be taken into account to localize the faults precisely. In this contribution, the sensitivity of the FDA method to the abnormalities and deviations in the cable geometry is demonstrated. Several measurements on a long MV cable were performed to examine the sensitivity of the FDA method in real cases. The used MV cable is damaged and a small part of its geometry is slightly deviated, which could not be detected using common fault localization methods, e.g., time domain reflectometry (TDR). The FDA method however, was applied and could successfully detect and localize the change in the cable geometry.

KW - Cable

KW - Fault localization

KW - Frequency Domain Analysis (FDA)

UR - http://www.scopus.com/inward/record.url?scp=85076837235&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-31676-1_75

DO - 10.1007/978-3-030-31676-1_75

M3 - Conference contribution

AN - SCOPUS:85076837235

SN - 9783030316754

T3 - Lecture Notes in Electrical Engineering

SP - 799

EP - 810

BT - Proceedings of the 21st International Symposium on High Voltage Engineering - Volume 1

PB - Springer Nature

CY - Cham

T2 - 21st International Symposium on High Voltage Engineering, ISH 2019

Y2 - 26 August 2019 through 30 August 2019

ER -