Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 51-57 |
| Seitenumfang | 7 |
| Fachzeitschrift | Solar Energy Materials and Solar Cells |
| Jahrgang | 131 |
| Publikationsstatus | Veröffentlicht - Dez. 2014 |
| Extern publiziert | Ja |
Abstract
We perform carrier lifetime investigations on oxygen-rich boron-doped Czochralski-grown silicon (Cz-Si) wafers. As a characteristic feature of oxygen-rich boron-doped silicon materials, their lifetime is generally limited by boron-oxygen-related defects, intensifying their recombination-active properties under illumination or, more generally speaking, minority-carrier injection. In this study, we examine the following characteristic lifetime values of boron-doped Cz-Si: τ0 after annealing in darkness (i.e. complete boron-oxygen defect deactivation), τd after illumination at room-temperature (i.e. in the completely degraded state) and τ0p after illumination at elevated temperature (i.e. after 'permanent recovery'). We show that the permanent recovery process can be strongly influenced by a rapid thermal annealing (RTA) step performed in a conventional belt-firing furnace in advance of the permanent recovery process. We show that all measured lifetimes, i.e. τ0, τd as well as τ0p, are strongly influenced by the RTA process. We observe a strong increase of the lifetime after permanent recovery, depending critically on the RTA process parameters. On 1-Ω cm Cz-Si material after permanent recovery we measure lifetimes of τ0p(Δn=1.5×1015cm-3)=210 μs without applying the RTA process and up to τ0p(Δn=1.5×1015cm-3)=2020 μs using optimized RTA conditions. Apart from the very high lifetimes achieved, the applied RTA process step also strongly influences the kinetics of the permanent recovery process. The recovery process is accelerated by almost two orders of magnitude, compared to a non-treated sample, which proves the industrial relevance of the process. We discuss the results within a recently proposed defect model which ascribes the observed dependence of the kinetics of the recovery process to the presence of boron nano-precipitates and their interaction with free interstitial boron atoms.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Energie (insg.)
- Erneuerbare Energien, Nachhaltigkeit und Umwelt
- Werkstoffwissenschaften (insg.)
- Oberflächen, Beschichtungen und Folien
Ziele für nachhaltige Entwicklung
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Solar Energy Materials and Solar Cells, Jahrgang 131, 12.2014, S. 51-57.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Lifetimes exceeding 1 ms in 1-Ω cm boron-doped Cz-silicon
AU - Walter, D. C.
AU - Lim, B.
AU - Bothe, K.
AU - Falster, R.
AU - Voronkov, V. V.
AU - Schmidt, J.
N1 - Publisher Copyright: © 2014 Elsevier B.V.
PY - 2014/12
Y1 - 2014/12
N2 - We perform carrier lifetime investigations on oxygen-rich boron-doped Czochralski-grown silicon (Cz-Si) wafers. As a characteristic feature of oxygen-rich boron-doped silicon materials, their lifetime is generally limited by boron-oxygen-related defects, intensifying their recombination-active properties under illumination or, more generally speaking, minority-carrier injection. In this study, we examine the following characteristic lifetime values of boron-doped Cz-Si: τ0 after annealing in darkness (i.e. complete boron-oxygen defect deactivation), τd after illumination at room-temperature (i.e. in the completely degraded state) and τ0p after illumination at elevated temperature (i.e. after 'permanent recovery'). We show that the permanent recovery process can be strongly influenced by a rapid thermal annealing (RTA) step performed in a conventional belt-firing furnace in advance of the permanent recovery process. We show that all measured lifetimes, i.e. τ0, τd as well as τ0p, are strongly influenced by the RTA process. We observe a strong increase of the lifetime after permanent recovery, depending critically on the RTA process parameters. On 1-Ω cm Cz-Si material after permanent recovery we measure lifetimes of τ0p(Δn=1.5×1015cm-3)=210 μs without applying the RTA process and up to τ0p(Δn=1.5×1015cm-3)=2020 μs using optimized RTA conditions. Apart from the very high lifetimes achieved, the applied RTA process step also strongly influences the kinetics of the permanent recovery process. The recovery process is accelerated by almost two orders of magnitude, compared to a non-treated sample, which proves the industrial relevance of the process. We discuss the results within a recently proposed defect model which ascribes the observed dependence of the kinetics of the recovery process to the presence of boron nano-precipitates and their interaction with free interstitial boron atoms.
AB - We perform carrier lifetime investigations on oxygen-rich boron-doped Czochralski-grown silicon (Cz-Si) wafers. As a characteristic feature of oxygen-rich boron-doped silicon materials, their lifetime is generally limited by boron-oxygen-related defects, intensifying their recombination-active properties under illumination or, more generally speaking, minority-carrier injection. In this study, we examine the following characteristic lifetime values of boron-doped Cz-Si: τ0 after annealing in darkness (i.e. complete boron-oxygen defect deactivation), τd after illumination at room-temperature (i.e. in the completely degraded state) and τ0p after illumination at elevated temperature (i.e. after 'permanent recovery'). We show that the permanent recovery process can be strongly influenced by a rapid thermal annealing (RTA) step performed in a conventional belt-firing furnace in advance of the permanent recovery process. We show that all measured lifetimes, i.e. τ0, τd as well as τ0p, are strongly influenced by the RTA process. We observe a strong increase of the lifetime after permanent recovery, depending critically on the RTA process parameters. On 1-Ω cm Cz-Si material after permanent recovery we measure lifetimes of τ0p(Δn=1.5×1015cm-3)=210 μs without applying the RTA process and up to τ0p(Δn=1.5×1015cm-3)=2020 μs using optimized RTA conditions. Apart from the very high lifetimes achieved, the applied RTA process step also strongly influences the kinetics of the permanent recovery process. The recovery process is accelerated by almost two orders of magnitude, compared to a non-treated sample, which proves the industrial relevance of the process. We discuss the results within a recently proposed defect model which ascribes the observed dependence of the kinetics of the recovery process to the presence of boron nano-precipitates and their interaction with free interstitial boron atoms.
KW - Boron-oxygen defect
KW - Carrier lifetime
KW - Permanent recovery
KW - Rapid thermal annealing (RTA)
KW - Silicon
UR - http://www.scopus.com/inward/record.url?scp=84908458499&partnerID=8YFLogxK
U2 - 10.1016/j.solmat.2014.06.011
DO - 10.1016/j.solmat.2014.06.011
M3 - Article
AN - SCOPUS:84908458499
VL - 131
SP - 51
EP - 57
JO - Solar Energy Materials and Solar Cells
JF - Solar Energy Materials and Solar Cells
SN - 0927-0248
ER -