Details
| Originalsprache | Englisch |
|---|---|
| Seiten | 116-128 |
| Seitenumfang | 13 |
| Band | 59 |
| Ausgabenummer | 9 |
| Fachzeitschrift | Microwave journal |
| Publikationsstatus | Veröffentlicht - Sept. 2016 |
Abstract
Molded interconnect devices (MID) are the three-dimensional (3D) response to the increasing market demand for components to be smaller and allied to efficient and flexible circuit carrier manufacturing. One manufacturing method for MIDs that is already common for large scale production of antennas in consumer devices, is the laser direct structuring (LDS) method. The LDS process with its laser based selective metallization processes provides great flexibility for developing electronic devices. This includes the 3D design scope in the development process, as well as the adaptability of a design during ongoing manufacturing. The substrate to be metallized by the LDS method is typically fabricated in an injection molding process using thermoplastic or thermoset materials that are doped with a special filler of mixed metal oxides. Depending on the plastic resin used, an LDS MID can be used for state-of-the-art SMT processes by applying various low or high temperature soldering methods, such as reflow. DS materials are generally suitable for RF applications and similar to a typical RF laminate, the choice of a LDS substrate material must be made by considering the specific application, taking into account both the RF and mechanical requirements. The 3D LDS process was evaluated for RF applications up to 67 GHz. The results show that the complex permittivity of the LDS polymer materials is only slightly changed due to the LDS additive.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Microwave journal, Jahrgang 59, Nr. 9, 09.2016, S. 116-128.
Publikation: Beitrag in nicht-wissenschaftlicher/populärwissenschaftlicher Zeitschrift/Zeitung › Beitrag in Publikumszeitung/-zeitschrift › Transfer
}
TY - GEN
T1 - LDS molded interconnect devices fit for mmwave
AU - Friedrich, Aline
AU - Geck, Bernd
AU - Fengler, Malte
PY - 2016/9
Y1 - 2016/9
N2 - Molded interconnect devices (MID) are the three-dimensional (3D) response to the increasing market demand for components to be smaller and allied to efficient and flexible circuit carrier manufacturing. One manufacturing method for MIDs that is already common for large scale production of antennas in consumer devices, is the laser direct structuring (LDS) method. The LDS process with its laser based selective metallization processes provides great flexibility for developing electronic devices. This includes the 3D design scope in the development process, as well as the adaptability of a design during ongoing manufacturing. The substrate to be metallized by the LDS method is typically fabricated in an injection molding process using thermoplastic or thermoset materials that are doped with a special filler of mixed metal oxides. Depending on the plastic resin used, an LDS MID can be used for state-of-the-art SMT processes by applying various low or high temperature soldering methods, such as reflow. DS materials are generally suitable for RF applications and similar to a typical RF laminate, the choice of a LDS substrate material must be made by considering the specific application, taking into account both the RF and mechanical requirements. The 3D LDS process was evaluated for RF applications up to 67 GHz. The results show that the complex permittivity of the LDS polymer materials is only slightly changed due to the LDS additive.
AB - Molded interconnect devices (MID) are the three-dimensional (3D) response to the increasing market demand for components to be smaller and allied to efficient and flexible circuit carrier manufacturing. One manufacturing method for MIDs that is already common for large scale production of antennas in consumer devices, is the laser direct structuring (LDS) method. The LDS process with its laser based selective metallization processes provides great flexibility for developing electronic devices. This includes the 3D design scope in the development process, as well as the adaptability of a design during ongoing manufacturing. The substrate to be metallized by the LDS method is typically fabricated in an injection molding process using thermoplastic or thermoset materials that are doped with a special filler of mixed metal oxides. Depending on the plastic resin used, an LDS MID can be used for state-of-the-art SMT processes by applying various low or high temperature soldering methods, such as reflow. DS materials are generally suitable for RF applications and similar to a typical RF laminate, the choice of a LDS substrate material must be made by considering the specific application, taking into account both the RF and mechanical requirements. The 3D LDS process was evaluated for RF applications up to 67 GHz. The results show that the complex permittivity of the LDS polymer materials is only slightly changed due to the LDS additive.
UR - http://www.scopus.com/inward/record.url?scp=84994589990&partnerID=8YFLogxK
M3 - Contribution in non-scientific journal
AN - SCOPUS:84994589990
VL - 59
SP - 116
EP - 128
JO - Microwave journal
JF - Microwave journal
SN - 0192-6225
ER -