Laser based additive manufacturing in industry and academia

Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review

Autoren

  • Michael Schmidt
  • Marion Merklein
  • David Bourell
  • Dimitri Dimitrov
  • Tino Hausotte
  • Konrad Wegener
  • Ludger Overmeyer
  • Frank Vollertsen
  • Gideon N. Levy

Externe Organisationen

  • Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU Erlangen-Nürnberg)
  • University of Texas at Austin
  • University of Stellenbosch
  • ETH Zürich
  • Laser Zentrum Hannover e.V. (LZH)
  • Universität Bremen
  • TTA Technology
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)561-583
Seitenumfang23
FachzeitschriftCIRP annals
Jahrgang66
Ausgabenummer2
PublikationsstatusVeröffentlicht - 2017
Extern publiziertJa

Abstract

Additive manufacturing (AM) is pushing towards industrial applications. But despite good sales of AM machines, there are still several challenges hindering a broad economic use of AM. This keynote paper starts with an overview over laser based additive manufacturing with comments on the main steps necessary to build parts to introduce the complexity of the whole process chain. Then from a manufacturing process oriented viewpoint it identifies these barriers for Laser Beam Melting (LBM) using results of a round robin test inside CIRP and the work of other research groups. It shows how those barriers may be overcome and points out research topics necessary to be addressed in the near future.

ASJC Scopus Sachgebiete

Zitieren

Laser based additive manufacturing in industry and academia. / Schmidt, Michael; Merklein, Marion; Bourell, David et al.
in: CIRP annals, Jahrgang 66, Nr. 2, 2017, S. 561-583.

Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review

Schmidt, M, Merklein, M, Bourell, D, Dimitrov, D, Hausotte, T, Wegener, K, Overmeyer, L, Vollertsen, F & Levy, GN 2017, 'Laser based additive manufacturing in industry and academia', CIRP annals, Jg. 66, Nr. 2, S. 561-583. https://doi.org/10.1016/j.cirp.2017.05.011
Schmidt, M., Merklein, M., Bourell, D., Dimitrov, D., Hausotte, T., Wegener, K., Overmeyer, L., Vollertsen, F., & Levy, G. N. (2017). Laser based additive manufacturing in industry and academia. CIRP annals, 66(2), 561-583. https://doi.org/10.1016/j.cirp.2017.05.011
Schmidt M, Merklein M, Bourell D, Dimitrov D, Hausotte T, Wegener K et al. Laser based additive manufacturing in industry and academia. CIRP annals. 2017;66(2):561-583. doi: 10.1016/j.cirp.2017.05.011
Schmidt, Michael ; Merklein, Marion ; Bourell, David et al. / Laser based additive manufacturing in industry and academia. in: CIRP annals. 2017 ; Jahrgang 66, Nr. 2. S. 561-583.
Download
@article{42b4239c1f534c719959cbd5be94422e,
title = "Laser based additive manufacturing in industry and academia",
abstract = "Additive manufacturing (AM) is pushing towards industrial applications. But despite good sales of AM machines, there are still several challenges hindering a broad economic use of AM. This keynote paper starts with an overview over laser based additive manufacturing with comments on the main steps necessary to build parts to introduce the complexity of the whole process chain. Then from a manufacturing process oriented viewpoint it identifies these barriers for Laser Beam Melting (LBM) using results of a round robin test inside CIRP and the work of other research groups. It shows how those barriers may be overcome and points out research topics necessary to be addressed in the near future.",
keywords = "Additive manufacturing, Laser, Production",
author = "Michael Schmidt and Marion Merklein and David Bourell and Dimitri Dimitrov and Tino Hausotte and Konrad Wegener and Ludger Overmeyer and Frank Vollertsen and Levy, {Gideon N.}",
year = "2017",
doi = "10.1016/j.cirp.2017.05.011",
language = "English",
volume = "66",
pages = "561--583",
journal = "CIRP annals",
issn = "0007-8506",
publisher = "Elsevier USA",
number = "2",

}

Download

TY - JOUR

T1 - Laser based additive manufacturing in industry and academia

AU - Schmidt, Michael

AU - Merklein, Marion

AU - Bourell, David

AU - Dimitrov, Dimitri

AU - Hausotte, Tino

AU - Wegener, Konrad

AU - Overmeyer, Ludger

AU - Vollertsen, Frank

AU - Levy, Gideon N.

PY - 2017

Y1 - 2017

N2 - Additive manufacturing (AM) is pushing towards industrial applications. But despite good sales of AM machines, there are still several challenges hindering a broad economic use of AM. This keynote paper starts with an overview over laser based additive manufacturing with comments on the main steps necessary to build parts to introduce the complexity of the whole process chain. Then from a manufacturing process oriented viewpoint it identifies these barriers for Laser Beam Melting (LBM) using results of a round robin test inside CIRP and the work of other research groups. It shows how those barriers may be overcome and points out research topics necessary to be addressed in the near future.

AB - Additive manufacturing (AM) is pushing towards industrial applications. But despite good sales of AM machines, there are still several challenges hindering a broad economic use of AM. This keynote paper starts with an overview over laser based additive manufacturing with comments on the main steps necessary to build parts to introduce the complexity of the whole process chain. Then from a manufacturing process oriented viewpoint it identifies these barriers for Laser Beam Melting (LBM) using results of a round robin test inside CIRP and the work of other research groups. It shows how those barriers may be overcome and points out research topics necessary to be addressed in the near future.

KW - Additive manufacturing

KW - Laser

KW - Production

UR - http://www.scopus.com/inward/record.url?scp=85021284250&partnerID=8YFLogxK

U2 - 10.1016/j.cirp.2017.05.011

DO - 10.1016/j.cirp.2017.05.011

M3 - Article

AN - SCOPUS:85021284250

VL - 66

SP - 561

EP - 583

JO - CIRP annals

JF - CIRP annals

SN - 0007-8506

IS - 2

ER -