TY - JOUR

T1 - Laminar flame properties of C1-C3 alkanes/hydrogen blends at gas engine conditions

AU - Kuppa, Kalyan

AU - Goldmann, Andreas

AU - Schöffler, Tobias

AU - Dinkelacker, Friedrich

N1 - © 2018 Elsevier Ltd. All rights reserved

PY - 2018/7/15

Y1 - 2018/7/15

N2 - The use of fuel blending is encouraged in order to achieve more flexibility in gas engines. In order to design such engines effectively, relevant information about the laminar flame speeds and laminar flame thickness are necessary. Hydrodynamic and thermo-diffusive instabilities at gas engine conditions prevent the acquisition of reliable data experimentally. One-dimensional numerical simulations with detailed chemistry can be a solution. A huge database of laminar flame speeds is generated covering a broad range of gas engine applications, pressure (p) 0.1–20 MPa, fresh gas temperature (Tu) 300–1100 K, air-fuel equivalence ratio (λ) 0.9–2.5, methane 100–60 vol%, ethane 0–40 vol%, propane 0–40 vol%, hydrogen 0–30 vol% and exhaust gas recirculation (EGR) 0–30 m%. The detailed reaction mechanisms GRI 3.0 and AramcoMech 1.3 are used for the generation of flame speed data for the mentioned conditions. A laminar flame speed correlation for 100% hydrogen extending up to elevated pressure and temperature conditions is developed. A blending law based on Le Chatelier's rule is investigated. It is observed that the HC-ratio has a very determining effect for the laminar flame properties of different C1-C3 alkane blends. Based on this observation, it was possible to derive a very efficient correlation for both laminar flame speed and laminar flame thickness for the group of natural gas blends with methane, ethane, propane and hydrogen, and as well as including relevant EGR, which corresponds within 7% accuracy to the calculated database of about 73,000 points. The developed laminar flame speed correlation is incorporated in an engine process simulation code. It is validated with the measured in-cylinder pressure traces from the single cylinder research engine experiments for different gas blends and EGR ratios.

AB - The use of fuel blending is encouraged in order to achieve more flexibility in gas engines. In order to design such engines effectively, relevant information about the laminar flame speeds and laminar flame thickness are necessary. Hydrodynamic and thermo-diffusive instabilities at gas engine conditions prevent the acquisition of reliable data experimentally. One-dimensional numerical simulations with detailed chemistry can be a solution. A huge database of laminar flame speeds is generated covering a broad range of gas engine applications, pressure (p) 0.1–20 MPa, fresh gas temperature (Tu) 300–1100 K, air-fuel equivalence ratio (λ) 0.9–2.5, methane 100–60 vol%, ethane 0–40 vol%, propane 0–40 vol%, hydrogen 0–30 vol% and exhaust gas recirculation (EGR) 0–30 m%. The detailed reaction mechanisms GRI 3.0 and AramcoMech 1.3 are used for the generation of flame speed data for the mentioned conditions. A laminar flame speed correlation for 100% hydrogen extending up to elevated pressure and temperature conditions is developed. A blending law based on Le Chatelier's rule is investigated. It is observed that the HC-ratio has a very determining effect for the laminar flame properties of different C1-C3 alkane blends. Based on this observation, it was possible to derive a very efficient correlation for both laminar flame speed and laminar flame thickness for the group of natural gas blends with methane, ethane, propane and hydrogen, and as well as including relevant EGR, which corresponds within 7% accuracy to the calculated database of about 73,000 points. The developed laminar flame speed correlation is incorporated in an engine process simulation code. It is validated with the measured in-cylinder pressure traces from the single cylinder research engine experiments for different gas blends and EGR ratios.

KW - Blends

KW - Correlation

KW - Gas engines

KW - Gas turbines

KW - Hydrogen

KW - Laminar flame speed

KW - Laminar flame thickness

KW - Natural gas

UR - http://www.scopus.com/inward/record.url?scp=85043775209&partnerID=8YFLogxK

U2 - 10.1016/j.fuel.2018.02.167

DO - 10.1016/j.fuel.2018.02.167

M3 - Article

AN - SCOPUS:85043775209

VL - 224

SP - 32

EP - 46

JO - Fuel

JF - Fuel

SN - 0016-2361

ER -