Details
| Originalsprache | Englisch |
|---|---|
| Fachzeitschrift | SAE Technical Papers |
| Publikationsstatus | Veröffentlicht - 1999 |
| Veranstaltung | International Conference on Lightning and Static Electricity - Toulouse, Frankreich Dauer: 22 Juni 1999 → 24 Juni 1999 |
Abstract
The tests were carried out on a carbonfibre reinforced structure with a number of wires with different kind of installation. The peak value of the current impulses ranges from 20 κA up to 200 κA and the comparison shows, that a reasonable linearity exists for carbonfibre reinforced material and that the deviations are always on the save side. The verification of the linearity has been checked then by the so called low-level method. This method uses the transfer function of the whole test arrangement, with the current impulse as the excitation signal and the induced voltage on the wires as the response signal. Also the transfer function shows a good linearity of the system.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Fahrzeugbau
- Ingenieurwesen (insg.)
- Sicherheit, Risiko, Zuverlässigkeit und Qualität
- Umweltwissenschaften (insg.)
- Umweltverschmutzung
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: SAE Technical Papers, 1999.
Publikation: Beitrag in Fachzeitschrift › Konferenzaufsatz in Fachzeitschrift › Forschung › Peer-Review
}
TY - JOUR
T1 - Investigations on the linearity of indirect effects with different methods
AU - Gockenbach, E.
AU - Ritschel, C. D.
AU - Jung, L.
AU - Haseborg, J. L.Ter
N1 - Copyright: Copyright 2019 Elsevier B.V., All rights reserved.
PY - 1999
Y1 - 1999
N2 - The tests were carried out on a carbonfibre reinforced structure with a number of wires with different kind of installation. The peak value of the current impulses ranges from 20 κA up to 200 κA and the comparison shows, that a reasonable linearity exists for carbonfibre reinforced material and that the deviations are always on the save side. The verification of the linearity has been checked then by the so called low-level method. This method uses the transfer function of the whole test arrangement, with the current impulse as the excitation signal and the induced voltage on the wires as the response signal. Also the transfer function shows a good linearity of the system.
AB - The tests were carried out on a carbonfibre reinforced structure with a number of wires with different kind of installation. The peak value of the current impulses ranges from 20 κA up to 200 κA and the comparison shows, that a reasonable linearity exists for carbonfibre reinforced material and that the deviations are always on the save side. The verification of the linearity has been checked then by the so called low-level method. This method uses the transfer function of the whole test arrangement, with the current impulse as the excitation signal and the induced voltage on the wires as the response signal. Also the transfer function shows a good linearity of the system.
UR - http://www.scopus.com/inward/record.url?scp=85072455190&partnerID=8YFLogxK
U2 - 10.4271/1999-01-2384
DO - 10.4271/1999-01-2384
M3 - Conference article
AN - SCOPUS:85072455190
JO - SAE Technical Papers
JF - SAE Technical Papers
SN - 0148-7191
T2 - International Conference on Lightning and Static Electricity
Y2 - 22 June 1999 through 24 June 1999
ER -