Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 680-685 |
| Seitenumfang | 6 |
| Fachzeitschrift | Procedia CIRP |
| Jahrgang | 94 |
| Frühes Online-Datum | 15 Sept. 2015 |
| Publikationsstatus | Veröffentlicht - 2020 |
| Extern publiziert | Ja |
| Veranstaltung | 11th CIRP Conference on Photonic Technologies, LANE 2020 - Virtual, Online Dauer: 7 Sept. 2020 → 10 Sept. 2020 |
Abstract
Choosing the right joining technology and configuration for thin metal sheets is challenging, if only distortion inducing options are available. Welding over the face side in lap configuration enables to join even thin sheets of stainless steel without distortion despite its low thermal conductivity. Pulsed laser welding of a stack of three stainless and high-carbon steel sheets in lap configuration over the face side in a single pass is a challenging task for producing the “digital feeler gauge” and is compared with common lap configuration. The experiments are carried out with metal sheets of thicknesses from 0.03 mm up to 1.00 mm and pulse durations between 0.3 ms and 2.0 ms. Afterwards metallographic cross sections are correlated with bending and peeling tests. It turns out that tempered high-carbon steel withstands bending, but not peeling and stainless steel shows high peeling resistance.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Steuerungs- und Systemtechnik
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Procedia CIRP, Jahrgang 94, 2020, S. 680-685.
Publikation: Beitrag in Fachzeitschrift › Konferenzaufsatz in Fachzeitschrift › Forschung › Peer-Review
}
TY - JOUR
T1 - Investigations on pulsed laser beam welding of thin steel sheets in lap configuration over the face side/parallel joint
AU - Grajczak, J.
AU - Nothdurft, S.
AU - Hermsdorf, J.
AU - Kaierle, S.
AU - Overmeyer, L.
N1 - Funding Information: We would like to thank the German ministry of economic affairs and energy and the NBank for the financial support within the project ?Entwicklung einer Verfahrenstechnologie f?r die Fertigung der digitalen F?hlerlehre zur Anwendung im Leichtbau? ZW 3-85020391.
PY - 2020
Y1 - 2020
N2 - Choosing the right joining technology and configuration for thin metal sheets is challenging, if only distortion inducing options are available. Welding over the face side in lap configuration enables to join even thin sheets of stainless steel without distortion despite its low thermal conductivity. Pulsed laser welding of a stack of three stainless and high-carbon steel sheets in lap configuration over the face side in a single pass is a challenging task for producing the “digital feeler gauge” and is compared with common lap configuration. The experiments are carried out with metal sheets of thicknesses from 0.03 mm up to 1.00 mm and pulse durations between 0.3 ms and 2.0 ms. Afterwards metallographic cross sections are correlated with bending and peeling tests. It turns out that tempered high-carbon steel withstands bending, but not peeling and stainless steel shows high peeling resistance.
AB - Choosing the right joining technology and configuration for thin metal sheets is challenging, if only distortion inducing options are available. Welding over the face side in lap configuration enables to join even thin sheets of stainless steel without distortion despite its low thermal conductivity. Pulsed laser welding of a stack of three stainless and high-carbon steel sheets in lap configuration over the face side in a single pass is a challenging task for producing the “digital feeler gauge” and is compared with common lap configuration. The experiments are carried out with metal sheets of thicknesses from 0.03 mm up to 1.00 mm and pulse durations between 0.3 ms and 2.0 ms. Afterwards metallographic cross sections are correlated with bending and peeling tests. It turns out that tempered high-carbon steel withstands bending, but not peeling and stainless steel shows high peeling resistance.
KW - High-carbon steel
KW - Lap configuration
KW - Lap joint
KW - Laser beam
KW - Micro welding
KW - Parallel joint
KW - Thin sheets
KW - Welding
UR - http://www.scopus.com/inward/record.url?scp=85093364545&partnerID=8YFLogxK
U2 - 10.1016/j.procir.2020.09.107
DO - 10.1016/j.procir.2020.09.107
M3 - Conference article
AN - SCOPUS:85093364545
VL - 94
SP - 680
EP - 685
JO - Procedia CIRP
JF - Procedia CIRP
SN - 2212-8271
T2 - 11th CIRP Conference on Photonic Technologies, LANE 2020
Y2 - 7 September 2020 through 10 September 2020
ER -