Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 4-7 |
| Seitenumfang | 4 |
| Fachzeitschrift | Conference Record of IEEE International Symposium on Electrical Insulation |
| Publikationsstatus | Veröffentlicht - 2004 |
| Veranstaltung | 2004 International Symposium on Electrical Insulation (ISEI) - Indianapolis, USA / Vereinigte Staaten Dauer: 19 Sept. 2004 → 22 Sept. 2004 |
Abstract
This contribution reports on the investigations of partial discharge (PD) and dissipation factor measurements as function of the applied test voltage to evaluate the actual status of insulation system for high voltage rotating machines due to thermo-mechanical stress. As test object actual stator bars were used, based on the epoxy VPI technology. A defined, well-known accelerated aging procedure was applied on the stator bars model which simulates the aging procedures of the stator insulation system due to service cyclic duty. During the thermo-mechanical aging procedure the changes in the dissipation factor as function of applied voltage and partial discharge activities were studied and possibilities to determine the condition of the insulation system researched.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Bauwesen
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Conference Record of IEEE International Symposium on Electrical Insulation, 2004, S. 4-7.
Publikation: Beitrag in Fachzeitschrift › Konferenzaufsatz in Fachzeitschrift › Forschung › Peer-Review
}
TY - JOUR
T1 - Investigations on characteristic parameters to evaluate the condition of the insulation system for high voltage rotating machines
AU - Farahani, M.
AU - Borsi, H.
AU - Gockenbach, E.
AU - Kaufhold, Martin
N1 - Copyright: Copyright 2008 Elsevier B.V., All rights reserved.
PY - 2004
Y1 - 2004
N2 - This contribution reports on the investigations of partial discharge (PD) and dissipation factor measurements as function of the applied test voltage to evaluate the actual status of insulation system for high voltage rotating machines due to thermo-mechanical stress. As test object actual stator bars were used, based on the epoxy VPI technology. A defined, well-known accelerated aging procedure was applied on the stator bars model which simulates the aging procedures of the stator insulation system due to service cyclic duty. During the thermo-mechanical aging procedure the changes in the dissipation factor as function of applied voltage and partial discharge activities were studied and possibilities to determine the condition of the insulation system researched.
AB - This contribution reports on the investigations of partial discharge (PD) and dissipation factor measurements as function of the applied test voltage to evaluate the actual status of insulation system for high voltage rotating machines due to thermo-mechanical stress. As test object actual stator bars were used, based on the epoxy VPI technology. A defined, well-known accelerated aging procedure was applied on the stator bars model which simulates the aging procedures of the stator insulation system due to service cyclic duty. During the thermo-mechanical aging procedure the changes in the dissipation factor as function of applied voltage and partial discharge activities were studied and possibilities to determine the condition of the insulation system researched.
UR - http://www.scopus.com/inward/record.url?scp=14844296437&partnerID=8YFLogxK
M3 - Conference article
AN - SCOPUS:14844296437
SP - 4
EP - 7
JO - Conference Record of IEEE International Symposium on Electrical Insulation
JF - Conference Record of IEEE International Symposium on Electrical Insulation
SN - 0164-2006
T2 - 2004 International Symposium on Electrical Insulation (ISEI)
Y2 - 19 September 2004 through 22 September 2004
ER -