Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 19-23 |
| Seitenumfang | 5 |
| Fachzeitschrift | KGK Kautschuk Gummi Kunststoffe |
| Jahrgang | 64 |
| Ausgabenummer | 4 |
| Publikationsstatus | Veröffentlicht - Apr. 2011 |
Abstract
Continuing earlier work a test rig for investigations into the tribological characteristics of radial lip seals has been further optimized implementing a sapphire hollow shaft and a new setup for LIF (Laser Induced Fluorescence) measurements. Quantitative lubricant film thickness measurements are performed applying an in-situ calibration approach. At the same time as the optical film thickness measurements are conducted, the seal friction torque is determined implementing a telemetric torque sensor. Results of speed step experiments carried out within the low-speed range of 0...100 rpm are presented for both new and run-in seals.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Maschinenbau
- Werkstoffwissenschaften (insg.)
- Polymere und Kunststoffe
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
- Werkstoffwissenschaften (insg.)
- Werkstoffchemie
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: KGK Kautschuk Gummi Kunststoffe, Jahrgang 64, Nr. 4, 04.2011, S. 19-23.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Investigations into the tribological characteristics of radial lip seals results of LIF and friction measurements
AU - Wennehorst, B.
AU - Poll, G. W.G.
PY - 2011/4
Y1 - 2011/4
N2 - Continuing earlier work a test rig for investigations into the tribological characteristics of radial lip seals has been further optimized implementing a sapphire hollow shaft and a new setup for LIF (Laser Induced Fluorescence) measurements. Quantitative lubricant film thickness measurements are performed applying an in-situ calibration approach. At the same time as the optical film thickness measurements are conducted, the seal friction torque is determined implementing a telemetric torque sensor. Results of speed step experiments carried out within the low-speed range of 0...100 rpm are presented for both new and run-in seals.
AB - Continuing earlier work a test rig for investigations into the tribological characteristics of radial lip seals has been further optimized implementing a sapphire hollow shaft and a new setup for LIF (Laser Induced Fluorescence) measurements. Quantitative lubricant film thickness measurements are performed applying an in-situ calibration approach. At the same time as the optical film thickness measurements are conducted, the seal friction torque is determined implementing a telemetric torque sensor. Results of speed step experiments carried out within the low-speed range of 0...100 rpm are presented for both new and run-in seals.
KW - Friction
KW - Laser induced fluorescence
KW - Lubricant film formation
KW - Lubricant film thickness
KW - Radial lip seal
UR - http://www.scopus.com/inward/record.url?scp=84873846757&partnerID=8YFLogxK
M3 - Article
AN - SCOPUS:84873846757
VL - 64
SP - 19
EP - 23
JO - KGK Kautschuk Gummi Kunststoffe
JF - KGK Kautschuk Gummi Kunststoffe
SN - 0948-3276
IS - 4
ER -