Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Proceedings of the 21st International Symposium on High Voltage Engineering |
| Herausgeber/-innen | Bálint Németh |
| Erscheinungsort | Cham |
| Herausgeber (Verlag) | Springer Nature |
| Seiten | 788-798 |
| Seitenumfang | 11 |
| Band | 1 |
| ISBN (elektronisch) | 978-3-030-31676-1 |
| ISBN (Print) | 9783030316754 |
| Publikationsstatus | Veröffentlicht - 2020 |
| Veranstaltung | 21st International Symposium on High Voltage Engineering, ISH 2019 - Budapest, Ungarn Dauer: 26 Aug. 2019 → 30 Aug. 2019 |
Publikationsreihe
| Name | Lecture Notes in Electrical Engineering |
|---|---|
| Band | 598 LNEE |
| ISSN (Print) | 1876-1100 |
| ISSN (elektronisch) | 1876-1119 |
Abstract
This research presents a comparative study of the ageing process of an oil-paper-insulation using Kraft paper. The main goal of this research is the comparison of the ageing behaviour of the insulation with different weight ratios and the influence on pertinent ageing markers, which are used to estimate the remaining lifetime of an oil-paper insulated transformer. Therefore, an investigation has been conducted to measure different parameters of a non-inhibited insulating oil during a long-term thermal stress over 15 weeks at a temperature of 130 ℃ to examine the influence of the ratio on the formation of these markers. The higher temperature compared to the normal operation temperature of a transformer is used to accelerate the thermal ageing of the insulation material in order to simulate the lifetime of a transformer. In addition to the ageing of pure paper and pure insulating oil, the paper-oil weight ratios 1:5, 1:10 and 1:20 will be investigated. The aim is to study how the respective insulating medium ages individually and to determine the ageing behaviour of the insulating materials when used together as a mixed dielectric, as it can be found in real transformers. Therefore, a typically used uninhibited liquid based on mineral oil is used as insulating liquid. Ageing markers such as water content, acidity as well as DGA analyses and other parameters are investigated. Furthermore, the DP-value of the paper samples is also measured. For this, an open system is reproduced, so that a permanent contact with the ambient air is given to simulate a free breathing transformer. The main aim of this study is to investigate the influence of the various weight ratios and how it influences the possibility of indirectly determining the condition of the insulating paper. For this purpose, ageing markers are to be investigated. The obtained results showed that the weight ratio has no influence on the ageing rate of paper but on some ageing markers.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Proceedings of the 21st International Symposium on High Voltage Engineering. Hrsg. / Bálint Németh. Band 1 Cham: Springer Nature, 2020. S. 788-798 (Lecture Notes in Electrical Engineering; Band 598 LNEE).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Investigation on the Accelerated Ageing Behaviour of an Oil-Paper-Insulation Using Different Weight Ratios
AU - Münster, T.
AU - Kinkeldey, T.
AU - Werle, P.
AU - Hämel, K.
AU - Preusel, J.
N1 - Funding Information: Acknowledgments. The authors would like to express their gratitude to GRIDINSPECT GmbH and AiF/ZIM for the financial support as well as Weidmann Electrical Technology AG for the support with insulation materials and Analysen Service GmbH for the analysis.
PY - 2020
Y1 - 2020
N2 - This research presents a comparative study of the ageing process of an oil-paper-insulation using Kraft paper. The main goal of this research is the comparison of the ageing behaviour of the insulation with different weight ratios and the influence on pertinent ageing markers, which are used to estimate the remaining lifetime of an oil-paper insulated transformer. Therefore, an investigation has been conducted to measure different parameters of a non-inhibited insulating oil during a long-term thermal stress over 15 weeks at a temperature of 130 ℃ to examine the influence of the ratio on the formation of these markers. The higher temperature compared to the normal operation temperature of a transformer is used to accelerate the thermal ageing of the insulation material in order to simulate the lifetime of a transformer. In addition to the ageing of pure paper and pure insulating oil, the paper-oil weight ratios 1:5, 1:10 and 1:20 will be investigated. The aim is to study how the respective insulating medium ages individually and to determine the ageing behaviour of the insulating materials when used together as a mixed dielectric, as it can be found in real transformers. Therefore, a typically used uninhibited liquid based on mineral oil is used as insulating liquid. Ageing markers such as water content, acidity as well as DGA analyses and other parameters are investigated. Furthermore, the DP-value of the paper samples is also measured. For this, an open system is reproduced, so that a permanent contact with the ambient air is given to simulate a free breathing transformer. The main aim of this study is to investigate the influence of the various weight ratios and how it influences the possibility of indirectly determining the condition of the insulating paper. For this purpose, ageing markers are to be investigated. The obtained results showed that the weight ratio has no influence on the ageing rate of paper but on some ageing markers.
AB - This research presents a comparative study of the ageing process of an oil-paper-insulation using Kraft paper. The main goal of this research is the comparison of the ageing behaviour of the insulation with different weight ratios and the influence on pertinent ageing markers, which are used to estimate the remaining lifetime of an oil-paper insulated transformer. Therefore, an investigation has been conducted to measure different parameters of a non-inhibited insulating oil during a long-term thermal stress over 15 weeks at a temperature of 130 ℃ to examine the influence of the ratio on the formation of these markers. The higher temperature compared to the normal operation temperature of a transformer is used to accelerate the thermal ageing of the insulation material in order to simulate the lifetime of a transformer. In addition to the ageing of pure paper and pure insulating oil, the paper-oil weight ratios 1:5, 1:10 and 1:20 will be investigated. The aim is to study how the respective insulating medium ages individually and to determine the ageing behaviour of the insulating materials when used together as a mixed dielectric, as it can be found in real transformers. Therefore, a typically used uninhibited liquid based on mineral oil is used as insulating liquid. Ageing markers such as water content, acidity as well as DGA analyses and other parameters are investigated. Furthermore, the DP-value of the paper samples is also measured. For this, an open system is reproduced, so that a permanent contact with the ambient air is given to simulate a free breathing transformer. The main aim of this study is to investigate the influence of the various weight ratios and how it influences the possibility of indirectly determining the condition of the insulating paper. For this purpose, ageing markers are to be investigated. The obtained results showed that the weight ratio has no influence on the ageing rate of paper but on some ageing markers.
KW - Ageing
KW - Degree of polymerization
KW - Insulation degradation
KW - Insulation life
KW - Oil
KW - Oxidation
KW - Paper
KW - Ratio
KW - Temperature
KW - Transformer
UR - http://www.scopus.com/inward/record.url?scp=85076851973&partnerID=8YFLogxK
U2 - 10.1007/978-3-030-31676-1_74
DO - 10.1007/978-3-030-31676-1_74
M3 - Conference contribution
AN - SCOPUS:85076851973
SN - 9783030316754
VL - 1
T3 - Lecture Notes in Electrical Engineering
SP - 788
EP - 798
BT - Proceedings of the 21st International Symposium on High Voltage Engineering
A2 - Németh, Bálint
PB - Springer Nature
CY - Cham
T2 - 21st International Symposium on High Voltage Engineering, ISH 2019
Y2 - 26 August 2019 through 30 August 2019
ER -