Details
| Originalsprache | Deutsch |
|---|---|
| Qualifikation | Doktor der Ingenieurwissenschaften |
| Gradverleihende Hochschule | |
| Betreut von |
|
| Datum der Verleihung des Grades | 21 Jan. 2019 |
| Erscheinungsort | Garbsen |
| ISBNs (Print) | 9783959003292 |
| Publikationsstatus | Veröffentlicht - 2019 |
Abstract
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Garbsen, 2019. 120 S.
Publikation: Qualifikations-/Studienabschlussarbeit › Dissertation
}
TY - BOOK
T1 - Investigation of the effect of ultrasonic cavitation in small gaps on surface properties
AU - Bai, Fushi
PY - 2019
Y1 - 2019
N2 - Ultrasonic cavitation can be used to improve surface properties of workpieces in industrial applications. During this surface enhancement process, a small gap is required to generate high impact forces on the workpiece surfaces. The distribution of cavitation bubbles, the optimal gap width and the process time highly affect the treated surface properties. In this thesis, the distribution of sound fields in the small gaps and the optimal standoff distance are simulated with the consideration of bubble interactions. Then, sonochemiluminescence and surface volume variation experiments are carried out. Additionally, a piezoelectric force sensor is designed to detect impact forces. Finally, plastic deformation volume is studied to more accurately identify the optimal process time. The simulation and experimental results show good agreements.
AB - Ultrasonic cavitation can be used to improve surface properties of workpieces in industrial applications. During this surface enhancement process, a small gap is required to generate high impact forces on the workpiece surfaces. The distribution of cavitation bubbles, the optimal gap width and the process time highly affect the treated surface properties. In this thesis, the distribution of sound fields in the small gaps and the optimal standoff distance are simulated with the consideration of bubble interactions. Then, sonochemiluminescence and surface volume variation experiments are carried out. Additionally, a piezoelectric force sensor is designed to detect impact forces. Finally, plastic deformation volume is studied to more accurately identify the optimal process time. The simulation and experimental results show good agreements.
U2 - 10.15488/4418
DO - 10.15488/4418
M3 - Dissertation
SN - 9783959003292
T3 - Berichte aus dem IDS
CY - Garbsen
ER -