Investigation of the Compressive Strength, Ultrasonic Pulse Velocity, Calorimetric, Microstructural and Rheological Properties of the Calcined Laterite-Based Geopolymer Materials

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

  • Eva Lunine Hseumou
  • Aimard Manfred Njawa Moudio
  • Hervé Kouamo Tchakouté
  • Claus Henning Rüscher

Organisationseinheiten

Externe Organisationen

  • University of Yaounde I
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)979-998
Seitenumfang20
FachzeitschriftJournal of Inorganic and Organometallic Polymers and Materials
Jahrgang34
Ausgabenummer3
PublikationsstatusVeröffentlicht - März 2024

Abstract

This study aims to investigate the compressive strengths, ultrasonic pulse velocity, calorimetric, microstructural and rheological properties of calcined laterite-based geopolymer materials. Calcined laterite has been used as an iron-rich aluminosilicate and the hardener containing various molar ratios SiO2/Na2O such as 1.6, 1.8, 2.0 and 2.2 have been used for the preparation of geopolymer materials. The 28-days compressive strengths of the geopolymer materials using sodium waterglass containing molar ratios SiO2/Na2O equal to 1.6, 1.8, 2.0 and 2.2 are 49.98, 48.19, 46.65 and 9.35 MPa, respectively. Their maximum ultrasonic pulse velocities are 3200, 2800, 2000 and 1600 m/s, respectively. Their total heat flows are 85.91, 68.42, 18.50 and 16.34 J/g, respectively. The rheological properties of the geopolymer materials indicate the destruction of the flocculation and the homogenization of the particles of calcined laterite during the formation of the fresh geopolymer prepared using hardeners containing the molar ratios SiO2/Na2O equal to 1.6, 1.8 and 2.0. The one from molar ratio SiO2/Na2O equal to 2.2 contains more flocculation and therefore inhibits the geopolymerization process. It was found that the compressive strengths decrease with decreasing the amorphous phase content, the ultrasonic pulse velocities, total heat flow and corroborate the rheological properties of calcined laterite-based geopolymer materials.

ASJC Scopus Sachgebiete

Zitieren

Investigation of the Compressive Strength, Ultrasonic Pulse Velocity, Calorimetric, Microstructural and Rheological Properties of the Calcined Laterite-Based Geopolymer Materials. / Hseumou, Eva Lunine; Moudio, Aimard Manfred Njawa; Tchakouté, Hervé Kouamo et al.
in: Journal of Inorganic and Organometallic Polymers and Materials, Jahrgang 34, Nr. 3, 03.2024, S. 979-998.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Download
@article{87970cfbe6184ab5aaa4d9b5f5192fd8,
title = "Investigation of the Compressive Strength, Ultrasonic Pulse Velocity, Calorimetric, Microstructural and Rheological Properties of the Calcined Laterite-Based Geopolymer Materials",
abstract = "This study aims to investigate the compressive strengths, ultrasonic pulse velocity, calorimetric, microstructural and rheological properties of calcined laterite-based geopolymer materials. Calcined laterite has been used as an iron-rich aluminosilicate and the hardener containing various molar ratios SiO2/Na2O such as 1.6, 1.8, 2.0 and 2.2 have been used for the preparation of geopolymer materials. The 28-days compressive strengths of the geopolymer materials using sodium waterglass containing molar ratios SiO2/Na2O equal to 1.6, 1.8, 2.0 and 2.2 are 49.98, 48.19, 46.65 and 9.35 MPa, respectively. Their maximum ultrasonic pulse velocities are 3200, 2800, 2000 and 1600 m/s, respectively. Their total heat flows are 85.91, 68.42, 18.50 and 16.34 J/g, respectively. The rheological properties of the geopolymer materials indicate the destruction of the flocculation and the homogenization of the particles of calcined laterite during the formation of the fresh geopolymer prepared using hardeners containing the molar ratios SiO2/Na2O equal to 1.6, 1.8 and 2.0. The one from molar ratio SiO2/Na2O equal to 2.2 contains more flocculation and therefore inhibits the geopolymerization process. It was found that the compressive strengths decrease with decreasing the amorphous phase content, the ultrasonic pulse velocities, total heat flow and corroborate the rheological properties of calcined laterite-based geopolymer materials.",
keywords = "Compressive strength, Geopolymer materials, Hardeners, Laterite, Rheology, Ultrasonic velocity",
author = "Hseumou, {Eva Lunine} and Moudio, {Aimard Manfred Njawa} and Tchakout{\'e}, {Herv{\'e} Kouamo} and R{\"u}scher, {Claus Henning}",
note = "Funding Information: Pr. Dr Herv{\'e} Tchakout{\'e} Kouamo gratefully acknowledges Alexander von Humboldt-Stiftung for financial support for this work under the grant N° KAM/1155741 GFHERMES-P. Authors gratefully acknowledge Miss Bewa Nobouassia Christelle for the Pore solutions, Ultrasonic pulse velocity, Isothermal calorimetry and Rheological properties characterisations. ",
year = "2024",
month = mar,
doi = "10.1007/s10904-023-02869-5",
language = "English",
volume = "34",
pages = "979--998",
journal = "Journal of Inorganic and Organometallic Polymers and Materials",
issn = "1574-1443",
publisher = "Plenum Press",
number = "3",

}

Download

TY - JOUR

T1 - Investigation of the Compressive Strength, Ultrasonic Pulse Velocity, Calorimetric, Microstructural and Rheological Properties of the Calcined Laterite-Based Geopolymer Materials

AU - Hseumou, Eva Lunine

AU - Moudio, Aimard Manfred Njawa

AU - Tchakouté, Hervé Kouamo

AU - Rüscher, Claus Henning

N1 - Funding Information: Pr. Dr Hervé Tchakouté Kouamo gratefully acknowledges Alexander von Humboldt-Stiftung for financial support for this work under the grant N° KAM/1155741 GFHERMES-P. Authors gratefully acknowledge Miss Bewa Nobouassia Christelle for the Pore solutions, Ultrasonic pulse velocity, Isothermal calorimetry and Rheological properties characterisations.

PY - 2024/3

Y1 - 2024/3

N2 - This study aims to investigate the compressive strengths, ultrasonic pulse velocity, calorimetric, microstructural and rheological properties of calcined laterite-based geopolymer materials. Calcined laterite has been used as an iron-rich aluminosilicate and the hardener containing various molar ratios SiO2/Na2O such as 1.6, 1.8, 2.0 and 2.2 have been used for the preparation of geopolymer materials. The 28-days compressive strengths of the geopolymer materials using sodium waterglass containing molar ratios SiO2/Na2O equal to 1.6, 1.8, 2.0 and 2.2 are 49.98, 48.19, 46.65 and 9.35 MPa, respectively. Their maximum ultrasonic pulse velocities are 3200, 2800, 2000 and 1600 m/s, respectively. Their total heat flows are 85.91, 68.42, 18.50 and 16.34 J/g, respectively. The rheological properties of the geopolymer materials indicate the destruction of the flocculation and the homogenization of the particles of calcined laterite during the formation of the fresh geopolymer prepared using hardeners containing the molar ratios SiO2/Na2O equal to 1.6, 1.8 and 2.0. The one from molar ratio SiO2/Na2O equal to 2.2 contains more flocculation and therefore inhibits the geopolymerization process. It was found that the compressive strengths decrease with decreasing the amorphous phase content, the ultrasonic pulse velocities, total heat flow and corroborate the rheological properties of calcined laterite-based geopolymer materials.

AB - This study aims to investigate the compressive strengths, ultrasonic pulse velocity, calorimetric, microstructural and rheological properties of calcined laterite-based geopolymer materials. Calcined laterite has been used as an iron-rich aluminosilicate and the hardener containing various molar ratios SiO2/Na2O such as 1.6, 1.8, 2.0 and 2.2 have been used for the preparation of geopolymer materials. The 28-days compressive strengths of the geopolymer materials using sodium waterglass containing molar ratios SiO2/Na2O equal to 1.6, 1.8, 2.0 and 2.2 are 49.98, 48.19, 46.65 and 9.35 MPa, respectively. Their maximum ultrasonic pulse velocities are 3200, 2800, 2000 and 1600 m/s, respectively. Their total heat flows are 85.91, 68.42, 18.50 and 16.34 J/g, respectively. The rheological properties of the geopolymer materials indicate the destruction of the flocculation and the homogenization of the particles of calcined laterite during the formation of the fresh geopolymer prepared using hardeners containing the molar ratios SiO2/Na2O equal to 1.6, 1.8 and 2.0. The one from molar ratio SiO2/Na2O equal to 2.2 contains more flocculation and therefore inhibits the geopolymerization process. It was found that the compressive strengths decrease with decreasing the amorphous phase content, the ultrasonic pulse velocities, total heat flow and corroborate the rheological properties of calcined laterite-based geopolymer materials.

KW - Compressive strength

KW - Geopolymer materials

KW - Hardeners

KW - Laterite

KW - Rheology

KW - Ultrasonic velocity

UR - http://www.scopus.com/inward/record.url?scp=85172810850&partnerID=8YFLogxK

U2 - 10.1007/s10904-023-02869-5

DO - 10.1007/s10904-023-02869-5

M3 - Article

AN - SCOPUS:85172810850

VL - 34

SP - 979

EP - 998

JO - Journal of Inorganic and Organometallic Polymers and Materials

JF - Journal of Inorganic and Organometallic Polymers and Materials

SN - 1574-1443

IS - 3

ER -