Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008 |
| Untertitel | May 18th - May 22nd 2008, Zürich, Switzerland |
| Herausgeber/-innen | Hendrik Van Brussel, E. Brinksmeier, H. Spaan, T. Burke |
| Erscheinungsort | Bedford |
| Seiten | 134-137 |
| Seitenumfang | 4 |
| Band | 2 |
| ISBN (elektronisch) | 9780955308253 |
| Publikationsstatus | Veröffentlicht - 2008 |
| Veranstaltung | 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008 - Zurich, Schweiz Dauer: 18 Mai 2008 → 22 Mai 2008 |
Abstract
At the Institute of Production Engineering and Machine Tools (IFW) micro-dimples are produced by means of fly-cutting. The work presented clarifies the impact of the tool rake angle on burr and chip formation when machining ductile steel. The development of a special quick-stop device allows the production of chip roots using flycutting kinematics. SEM and metallographic micrographs give detailed information about the three-dimensional chip formation and characteristic variables, such as chip compression ratio and shear angle. These investigations provide an adequate basis for the understanding of the material removal mechanisms and consequently for the tool and process design.
ASJC Scopus Sachgebiete
- Physik und Astronomie (insg.)
- Instrumentierung
- Ingenieurwesen (insg.)
- Maschinenbau
- Werkstoffwissenschaften (insg.)
- Allgemeine Materialwissenschaften
- Umweltwissenschaften (insg.)
- Environmental engineering
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008: May 18th - May 22nd 2008, Zürich, Switzerland. Hrsg. / Hendrik Van Brussel; E. Brinksmeier; H. Spaan; T. Burke. Band 2 Bedford, 2008. S. 134-137.
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Investigation of Chip Formation during Microstructuring by Means of Cutting
AU - Denkena, B.
AU - Boehnke, D.
AU - Kästner, J.
PY - 2008
Y1 - 2008
N2 - At the Institute of Production Engineering and Machine Tools (IFW) micro-dimples are produced by means of fly-cutting. The work presented clarifies the impact of the tool rake angle on burr and chip formation when machining ductile steel. The development of a special quick-stop device allows the production of chip roots using flycutting kinematics. SEM and metallographic micrographs give detailed information about the three-dimensional chip formation and characteristic variables, such as chip compression ratio and shear angle. These investigations provide an adequate basis for the understanding of the material removal mechanisms and consequently for the tool and process design.
AB - At the Institute of Production Engineering and Machine Tools (IFW) micro-dimples are produced by means of fly-cutting. The work presented clarifies the impact of the tool rake angle on burr and chip formation when machining ductile steel. The development of a special quick-stop device allows the production of chip roots using flycutting kinematics. SEM and metallographic micrographs give detailed information about the three-dimensional chip formation and characteristic variables, such as chip compression ratio and shear angle. These investigations provide an adequate basis for the understanding of the material removal mechanisms and consequently for the tool and process design.
UR - http://www.scopus.com/inward/record.url?scp=84901784311&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:84901784311
VL - 2
SP - 134
EP - 137
BT - Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008
A2 - Van Brussel, Hendrik
A2 - Brinksmeier, E.
A2 - Spaan, H.
A2 - Burke, T.
CY - Bedford
T2 - 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008
Y2 - 18 May 2008 through 22 May 2008
ER -