Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | 2016 12th International Congress Molded Interconnect Devices - Scientific Proceedings, MID 2016 |
| Herausgeber (Verlag) | Institute of Electrical and Electronics Engineers Inc. |
| ISBN (elektronisch) | 9781509054282 |
| Publikationsstatus | Veröffentlicht - 8 Nov. 2016 |
| Veranstaltung | 12th International Congress on Molded Interconnect Devices, MID 2016 - Wurzburg, Deutschland Dauer: 28 Sept. 2016 → 29 Sept. 2016 |
Abstract
As a tribute to the continuously increasing volume of data traffic, optical waveguides have become a serious alternative to electrical circuitries. The potential of precise spaceresolved strain measurements or the capacity to transmit very large amounts of data are two examples of the beneficial use of optical systems. Apart from the general advantages of the optical signal line, like high electromagnetic compatibility, usage in explosive atmosphere or the reduced weight compared to copper cables, modern technologies make use of the possibilities to integrate optical waveguides into structural components. The printing of polymer optical waveguides is part of the current research in functional printing technology. Optimizing the transmission quality and the resolution are key objectives to establish integrated optical data transmission in industry. The manufacturing of multimode waveguides presented in this work is accomplished by a combination of two printing processes. Before producing the optical waveguide itself, using Aerosol Jet Printing, pre-conditioned areas with either hydrophobic or hydrophilic behavior are generated on flexible substrates with an adapted flexographic printing mechanism. This two-stage process allows for the fabrication of step index waveguides featuring parabolic cross sections with minimum widths down to 10 μm and aspect ratios of about 0.3. Conditioning the substrate, which itself forms the bottom cladding, provides a low surface roughness of the optical core. This paper shows the latest results of printing polymer optical waveguides, focusing on actual challenges and optical transmission quality.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Werkstoffwissenschaften (insg.)
- Polymere und Kunststoffe
- Werkstoffwissenschaften (insg.)
- Oberflächen, Beschichtungen und Folien
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
2016 12th International Congress Molded Interconnect Devices - Scientific Proceedings, MID 2016. Institute of Electrical and Electronics Engineers Inc., 2016. 7738933.
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Integration of polymer optical waveguides by using flexographic and aerosol jet printing
AU - Reitberger, Thomas
AU - Franke, Jörg
AU - Hoffmann, Gerd Albert
AU - Overmeyer, Ludger
AU - Lorenz, Lukas
AU - Wolter, Klaus Jürgen
PY - 2016/11/8
Y1 - 2016/11/8
N2 - As a tribute to the continuously increasing volume of data traffic, optical waveguides have become a serious alternative to electrical circuitries. The potential of precise spaceresolved strain measurements or the capacity to transmit very large amounts of data are two examples of the beneficial use of optical systems. Apart from the general advantages of the optical signal line, like high electromagnetic compatibility, usage in explosive atmosphere or the reduced weight compared to copper cables, modern technologies make use of the possibilities to integrate optical waveguides into structural components. The printing of polymer optical waveguides is part of the current research in functional printing technology. Optimizing the transmission quality and the resolution are key objectives to establish integrated optical data transmission in industry. The manufacturing of multimode waveguides presented in this work is accomplished by a combination of two printing processes. Before producing the optical waveguide itself, using Aerosol Jet Printing, pre-conditioned areas with either hydrophobic or hydrophilic behavior are generated on flexible substrates with an adapted flexographic printing mechanism. This two-stage process allows for the fabrication of step index waveguides featuring parabolic cross sections with minimum widths down to 10 μm and aspect ratios of about 0.3. Conditioning the substrate, which itself forms the bottom cladding, provides a low surface roughness of the optical core. This paper shows the latest results of printing polymer optical waveguides, focusing on actual challenges and optical transmission quality.
AB - As a tribute to the continuously increasing volume of data traffic, optical waveguides have become a serious alternative to electrical circuitries. The potential of precise spaceresolved strain measurements or the capacity to transmit very large amounts of data are two examples of the beneficial use of optical systems. Apart from the general advantages of the optical signal line, like high electromagnetic compatibility, usage in explosive atmosphere or the reduced weight compared to copper cables, modern technologies make use of the possibilities to integrate optical waveguides into structural components. The printing of polymer optical waveguides is part of the current research in functional printing technology. Optimizing the transmission quality and the resolution are key objectives to establish integrated optical data transmission in industry. The manufacturing of multimode waveguides presented in this work is accomplished by a combination of two printing processes. Before producing the optical waveguide itself, using Aerosol Jet Printing, pre-conditioned areas with either hydrophobic or hydrophilic behavior are generated on flexible substrates with an adapted flexographic printing mechanism. This two-stage process allows for the fabrication of step index waveguides featuring parabolic cross sections with minimum widths down to 10 μm and aspect ratios of about 0.3. Conditioning the substrate, which itself forms the bottom cladding, provides a low surface roughness of the optical core. This paper shows the latest results of printing polymer optical waveguides, focusing on actual challenges and optical transmission quality.
KW - Aerosol Jet Printing
KW - Conditioning
KW - Flexographic Printing
KW - Optical
KW - Printing
UR - http://www.scopus.com/inward/record.url?scp=85006846878&partnerID=8YFLogxK
U2 - 10.1109/icmid.2016.7738933
DO - 10.1109/icmid.2016.7738933
M3 - Conference contribution
AN - SCOPUS:85006846878
BT - 2016 12th International Congress Molded Interconnect Devices - Scientific Proceedings, MID 2016
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 12th International Congress on Molded Interconnect Devices, MID 2016
Y2 - 28 September 2016 through 29 September 2016
ER -