Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 827-831 |
| Seitenumfang | 5 |
| Fachzeitschrift | Minerals, Metals and Materials Series |
| Ausgabenummer | 210819 |
| Publikationsstatus | Veröffentlicht - 1 Jan. 2017 |
| Veranstaltung | International Symposium on Light Metals, 2017 - San Diego, USA / Vereinigte Staaten Dauer: 26 Feb. 2017 → 2 März 2017 |
Abstract
The formation of strips at twin-roll casting depends on the state of the roll surface. The processing conditions, which are characterized by high metal-tool interface temperatures and compression stresses, provoke sticking between the cast material and the rolls. This effects changing of the tool’s topography, impairment of the strip’s surface quality and interference of its flatness. In the scope of this study the evolution of roll’s topography at twin-roll casting of 3 mm thick strips of aluminum alloys EN AW-1070 and EN AW-6082 without any release agents was experimentally analyzed using laboratory casting unit. The effect of repetitive tool’s self-cleaning during processing of the EN AW-6082 alloy was observed, whereas aluminum of technical purity showed intensive sticking on the roll surface. In the last case micro-profiling of the tool’s surface is not more efficient and release agents have to be used for improvement of the strip’s formation conditions.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Energie (insg.)
- Energieanlagenbau und Kraftwerkstechnik
- Ingenieurwesen (insg.)
- Werkstoffmechanik
- Werkstoffwissenschaften (insg.)
- Metalle und Legierungen
- Werkstoffwissenschaften (insg.)
- Werkstoffchemie
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Minerals, Metals and Materials Series, Nr. 210819, 01.01.2017, S. 827-831.
Publikation: Beitrag in Fachzeitschrift › Konferenzaufsatz in Fachzeitschrift › Forschung › Peer-Review
}
TY - JOUR
T1 - Influence of sticking on the roll topography at twin-roll casting of aluminum alloys
AU - Grydin, Olexandr
AU - Nürnberger, Florian
AU - Schaper, Mirko
PY - 2017/1/1
Y1 - 2017/1/1
N2 - The formation of strips at twin-roll casting depends on the state of the roll surface. The processing conditions, which are characterized by high metal-tool interface temperatures and compression stresses, provoke sticking between the cast material and the rolls. This effects changing of the tool’s topography, impairment of the strip’s surface quality and interference of its flatness. In the scope of this study the evolution of roll’s topography at twin-roll casting of 3 mm thick strips of aluminum alloys EN AW-1070 and EN AW-6082 without any release agents was experimentally analyzed using laboratory casting unit. The effect of repetitive tool’s self-cleaning during processing of the EN AW-6082 alloy was observed, whereas aluminum of technical purity showed intensive sticking on the roll surface. In the last case micro-profiling of the tool’s surface is not more efficient and release agents have to be used for improvement of the strip’s formation conditions.
AB - The formation of strips at twin-roll casting depends on the state of the roll surface. The processing conditions, which are characterized by high metal-tool interface temperatures and compression stresses, provoke sticking between the cast material and the rolls. This effects changing of the tool’s topography, impairment of the strip’s surface quality and interference of its flatness. In the scope of this study the evolution of roll’s topography at twin-roll casting of 3 mm thick strips of aluminum alloys EN AW-1070 and EN AW-6082 without any release agents was experimentally analyzed using laboratory casting unit. The effect of repetitive tool’s self-cleaning during processing of the EN AW-6082 alloy was observed, whereas aluminum of technical purity showed intensive sticking on the roll surface. In the last case micro-profiling of the tool’s surface is not more efficient and release agents have to be used for improvement of the strip’s formation conditions.
KW - Aluminum alloys
KW - Roll topography
KW - Sticking
KW - Thin strip
KW - Twin-roll casting
UR - http://www.scopus.com/inward/record.url?scp=85042359723&partnerID=8YFLogxK
U2 - 10.1007/978-3-319-51541-0_100
DO - 10.1007/978-3-319-51541-0_100
M3 - Conference article
AN - SCOPUS:85042359723
SP - 827
EP - 831
JO - Minerals, Metals and Materials Series
JF - Minerals, Metals and Materials Series
SN - 2367-1181
IS - 210819
T2 - International Symposium on Light Metals, 2017
Y2 - 26 February 2017 through 2 March 2017
ER -