Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 185-189 |
| Seitenumfang | 5 |
| Fachzeitschrift | Procedia CIRP |
| Jahrgang | 111 |
| Frühes Online-Datum | 6 Sept. 2022 |
| Publikationsstatus | Veröffentlicht - 2022 |
| Veranstaltung | 12th CIRP Conference on Photonic Technologies, LANE 2022 - Erlangen, Deutschland Dauer: 4 Sept. 2022 → 8 Sept. 2022 |
Abstract
The “Laser-assisted double wire with non-transferred arc surfacing process (LDNA)” is characterized by an electric arc burning between the filling wires. The molten filler material is fed to the substrate surface by gravity and is shaped by a laser beam. In this work, the influence of laser parameters on seam geometry and dilution is investigated. The investigations include a linear and convex pendulum form, a focal length of 300 mm and 400 mm, an oscillation frequency of 10 Hz and a disc laser using a wavelength of 1,030 nm with a power of 1,000 W and 1,400 W. Two 316L filling wires with 1.2 mm and an AISI1024 substrate with 20 mm are used. The change in the dilution and the welding geometry is determined.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Steuerungs- und Systemtechnik
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Procedia CIRP, Jahrgang 111, 2022, S. 185-189.
Publikation: Beitrag in Fachzeitschrift › Konferenzaufsatz in Fachzeitschrift › Forschung › Peer-Review
}
TY - JOUR
T1 - Influence of laser spot oscillation parameters on the seam geometry and dilution in the LDNA process
AU - Bokelmann, Tjorben
AU - Lammers, Marius
AU - Hermsdorf, Jörg
AU - Emadmostoufi, Sobhan
AU - Mokrov, Oleg
AU - Sharma, Rahul
AU - Reisgen, Uwe
AU - Kaierle, Stefan
N1 - Funding Information: The investigations have been carried out within the research project DFG 423140171. The authors would like to express their special gratitude to the German Research Foundation (DFG).
PY - 2022
Y1 - 2022
N2 - The “Laser-assisted double wire with non-transferred arc surfacing process (LDNA)” is characterized by an electric arc burning between the filling wires. The molten filler material is fed to the substrate surface by gravity and is shaped by a laser beam. In this work, the influence of laser parameters on seam geometry and dilution is investigated. The investigations include a linear and convex pendulum form, a focal length of 300 mm and 400 mm, an oscillation frequency of 10 Hz and a disc laser using a wavelength of 1,030 nm with a power of 1,000 W and 1,400 W. Two 316L filling wires with 1.2 mm and an AISI1024 substrate with 20 mm are used. The change in the dilution and the welding geometry is determined.
AB - The “Laser-assisted double wire with non-transferred arc surfacing process (LDNA)” is characterized by an electric arc burning between the filling wires. The molten filler material is fed to the substrate surface by gravity and is shaped by a laser beam. In this work, the influence of laser parameters on seam geometry and dilution is investigated. The investigations include a linear and convex pendulum form, a focal length of 300 mm and 400 mm, an oscillation frequency of 10 Hz and a disc laser using a wavelength of 1,030 nm with a power of 1,000 W and 1,400 W. Two 316L filling wires with 1.2 mm and an AISI1024 substrate with 20 mm are used. The change in the dilution and the welding geometry is determined.
KW - Additive Manufacturing
KW - Laser spot
KW - LDNA
KW - Oscillation
KW - Pendulum form
UR - http://www.scopus.com/inward/record.url?scp=85141898864&partnerID=8YFLogxK
U2 - 10.1016/j.procir.2022.08.043
DO - 10.1016/j.procir.2022.08.043
M3 - Conference article
AN - SCOPUS:85141898864
VL - 111
SP - 185
EP - 189
JO - Procedia CIRP
JF - Procedia CIRP
SN - 2212-8271
T2 - 12th CIRP Conference on Photonic Technologies, LANE 2022
Y2 - 4 September 2022 through 8 September 2022
ER -