Inertial-robotic motion tracking in end-effector-based rehabilitation robots

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

Externe Organisationen

  • Technische Universität Berlin
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Aufsatznummer554639
Seiten (von - bis)554639
Seitenumfang1
FachzeitschriftFrontiers in Robotics and AI
Jahrgang7
PublikationsstatusVeröffentlicht - 2020
Extern publiziertJa

Abstract

End-effector-based robotic systems provide easy-to-set-up motion support in rehabilitation of stroke and spinal-cord-injured patients. However, measurement information is obtained only about the motion of the limb segments to which the systems are attached and not about the adjacent limb segments. We demonstrate in one particular experimental setup that this limitation can be overcome by augmenting an end-effector-based robot with a wearable inertial sensor. Most existing inertial motion tracking approaches rely on a homogeneous magnetic field and thus fail in indoor environments and near ferromagnetic materials and electronic devices. In contrast, we propose a magnetometer-free sensor fusion method. It uses a quaternion-based algorithm to track the heading of a limb segment in real time by combining the gyroscope and accelerometer readings with position measurements of one point along that segment. We apply this method to an upper-limb rehabilitation robotics use case in which the orientation and position of the forearm and elbow are known, and the orientation and position of the upper arm and shoulder are estimated by the proposed method using an inertial sensor worn on the upper arm. Experimental data from five healthy subjects who performed 282 proper executions of a typical rehabilitation motion and 163 executions with compensation motion are evaluated. Using a camera-based system as a ground truth, we demonstrate that the shoulder position and the elbow angle are tracked with median errors around 4 cm and 4°, respectively; and that undesirable compensatory shoulder movements, which were defined as shoulder displacements greater ±10 cm for more than 20% of a motion cycle, are detected and classified 100% correctly across all 445 performed motions. The results indicate that wearable inertial sensors and end-effector-based robots can be combined to provide means for effective rehabilitation therapy with likewise detailed and accurate motion tracking for performance assessment, real-time biofeedback and feedback control of robotic and neuroprosthetic motion support.

ASJC Scopus Sachgebiete

Zitieren

Inertial-robotic motion tracking in end-effector-based rehabilitation robots. / Passon, Arne; Schauer, Thomas; Seel, Thomas.
in: Frontiers in Robotics and AI, Jahrgang 7, 554639, 2020, S. 554639.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Passon, A, Schauer, T & Seel, T 2020, 'Inertial-robotic motion tracking in end-effector-based rehabilitation robots', Frontiers in Robotics and AI, Jg. 7, 554639, S. 554639. https://doi.org/10.3389/frobt.2020.554639
Passon, A., Schauer, T., & Seel, T. (2020). Inertial-robotic motion tracking in end-effector-based rehabilitation robots. Frontiers in Robotics and AI, 7, 554639. Artikel 554639. https://doi.org/10.3389/frobt.2020.554639
Passon A, Schauer T, Seel T. Inertial-robotic motion tracking in end-effector-based rehabilitation robots. Frontiers in Robotics and AI. 2020;7:554639. 554639. doi: 10.3389/frobt.2020.554639
Passon, Arne ; Schauer, Thomas ; Seel, Thomas. / Inertial-robotic motion tracking in end-effector-based rehabilitation robots. in: Frontiers in Robotics and AI. 2020 ; Jahrgang 7. S. 554639.
Download
@article{f4e11ad837954957a0ddc3a37fc39d44,
title = "Inertial-robotic motion tracking in end-effector-based rehabilitation robots",
abstract = "End-effector-based robotic systems provide easy-to-set-up motion support in rehabilitation of stroke and spinal-cord-injured patients. However, measurement information is obtained only about the motion of the limb segments to which the systems are attached and not about the adjacent limb segments. We demonstrate in one particular experimental setup that this limitation can be overcome by augmenting an end-effector-based robot with a wearable inertial sensor. Most existing inertial motion tracking approaches rely on a homogeneous magnetic field and thus fail in indoor environments and near ferromagnetic materials and electronic devices. In contrast, we propose a magnetometer-free sensor fusion method. It uses a quaternion-based algorithm to track the heading of a limb segment in real time by combining the gyroscope and accelerometer readings with position measurements of one point along that segment. We apply this method to an upper-limb rehabilitation robotics use case in which the orientation and position of the forearm and elbow are known, and the orientation and position of the upper arm and shoulder are estimated by the proposed method using an inertial sensor worn on the upper arm. Experimental data from five healthy subjects who performed 282 proper executions of a typical rehabilitation motion and 163 executions with compensation motion are evaluated. Using a camera-based system as a ground truth, we demonstrate that the shoulder position and the elbow angle are tracked with median errors around 4 cm and 4°, respectively; and that undesirable compensatory shoulder movements, which were defined as shoulder displacements greater ±10 cm for more than 20% of a motion cycle, are detected and classified 100% correctly across all 445 performed motions. The results indicate that wearable inertial sensors and end-effector-based robots can be combined to provide means for effective rehabilitation therapy with likewise detailed and accurate motion tracking for performance assessment, real-time biofeedback and feedback control of robotic and neuroprosthetic motion support.",
keywords = "compensation motion detection, end-effector-based robots, inertial measurement units, posture biofeedback, real-time tracking, rehabilitation robots, sensor fusion, upper-limb rehabilitation",
author = "Arne Passon and Thomas Schauer and Thomas Seel",
note = "Publisher Copyright: {\textcopyright} Copyright {\textcopyright} 2020 Passon, Schauer and Seel.",
year = "2020",
doi = "10.3389/frobt.2020.554639",
language = "English",
volume = "7",
pages = "554639",

}

Download

TY - JOUR

T1 - Inertial-robotic motion tracking in end-effector-based rehabilitation robots

AU - Passon, Arne

AU - Schauer, Thomas

AU - Seel, Thomas

N1 - Publisher Copyright: © Copyright © 2020 Passon, Schauer and Seel.

PY - 2020

Y1 - 2020

N2 - End-effector-based robotic systems provide easy-to-set-up motion support in rehabilitation of stroke and spinal-cord-injured patients. However, measurement information is obtained only about the motion of the limb segments to which the systems are attached and not about the adjacent limb segments. We demonstrate in one particular experimental setup that this limitation can be overcome by augmenting an end-effector-based robot with a wearable inertial sensor. Most existing inertial motion tracking approaches rely on a homogeneous magnetic field and thus fail in indoor environments and near ferromagnetic materials and electronic devices. In contrast, we propose a magnetometer-free sensor fusion method. It uses a quaternion-based algorithm to track the heading of a limb segment in real time by combining the gyroscope and accelerometer readings with position measurements of one point along that segment. We apply this method to an upper-limb rehabilitation robotics use case in which the orientation and position of the forearm and elbow are known, and the orientation and position of the upper arm and shoulder are estimated by the proposed method using an inertial sensor worn on the upper arm. Experimental data from five healthy subjects who performed 282 proper executions of a typical rehabilitation motion and 163 executions with compensation motion are evaluated. Using a camera-based system as a ground truth, we demonstrate that the shoulder position and the elbow angle are tracked with median errors around 4 cm and 4°, respectively; and that undesirable compensatory shoulder movements, which were defined as shoulder displacements greater ±10 cm for more than 20% of a motion cycle, are detected and classified 100% correctly across all 445 performed motions. The results indicate that wearable inertial sensors and end-effector-based robots can be combined to provide means for effective rehabilitation therapy with likewise detailed and accurate motion tracking for performance assessment, real-time biofeedback and feedback control of robotic and neuroprosthetic motion support.

AB - End-effector-based robotic systems provide easy-to-set-up motion support in rehabilitation of stroke and spinal-cord-injured patients. However, measurement information is obtained only about the motion of the limb segments to which the systems are attached and not about the adjacent limb segments. We demonstrate in one particular experimental setup that this limitation can be overcome by augmenting an end-effector-based robot with a wearable inertial sensor. Most existing inertial motion tracking approaches rely on a homogeneous magnetic field and thus fail in indoor environments and near ferromagnetic materials and electronic devices. In contrast, we propose a magnetometer-free sensor fusion method. It uses a quaternion-based algorithm to track the heading of a limb segment in real time by combining the gyroscope and accelerometer readings with position measurements of one point along that segment. We apply this method to an upper-limb rehabilitation robotics use case in which the orientation and position of the forearm and elbow are known, and the orientation and position of the upper arm and shoulder are estimated by the proposed method using an inertial sensor worn on the upper arm. Experimental data from five healthy subjects who performed 282 proper executions of a typical rehabilitation motion and 163 executions with compensation motion are evaluated. Using a camera-based system as a ground truth, we demonstrate that the shoulder position and the elbow angle are tracked with median errors around 4 cm and 4°, respectively; and that undesirable compensatory shoulder movements, which were defined as shoulder displacements greater ±10 cm for more than 20% of a motion cycle, are detected and classified 100% correctly across all 445 performed motions. The results indicate that wearable inertial sensors and end-effector-based robots can be combined to provide means for effective rehabilitation therapy with likewise detailed and accurate motion tracking for performance assessment, real-time biofeedback and feedback control of robotic and neuroprosthetic motion support.

KW - compensation motion detection

KW - end-effector-based robots

KW - inertial measurement units

KW - posture biofeedback

KW - real-time tracking

KW - rehabilitation robots

KW - sensor fusion

KW - upper-limb rehabilitation

UR - http://www.scopus.com/inward/record.url?scp=85106768097&partnerID=8YFLogxK

U2 - 10.3389/frobt.2020.554639

DO - 10.3389/frobt.2020.554639

M3 - Article

VL - 7

SP - 554639

JO - Frontiers in Robotics and AI

JF - Frontiers in Robotics and AI

M1 - 554639

ER -

Von denselben Autoren