IMAGE-BASED DEEP LEARNING FOR RHEOLOGY DETERMINATION OF BINGHAM FLUIDS

Publikation: Beitrag in FachzeitschriftKonferenzaufsatz in FachzeitschriftForschungPeer-Review

Autoren

Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)711-720
Seitenumfang10
FachzeitschriftInternational Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives
Jahrgang43
AusgabenummerB2-2022
PublikationsstatusVeröffentlicht - 30 Mai 2022
Veranstaltung2022 24th ISPRS Congress on Imaging Today, Foreseeing Tomorrow, Commission II - Nice, Frankreich
Dauer: 6 Juni 202211 Juni 2022

Abstract

In this work, a method to predict the rheological properties of ultrasonic gel, as a reference substance of cement paste, is presented. For this purpose, images are taken with a stereo camera system which show a mixing paddle moving through the ultrasonic gels of different consistency, thus setting them in motion. A digital elevation model (DEM) and a corresponding orthophoto are created from the image pairs using classical image matching and orthoprojection methods. These are used as inputs into a Convolutional Neural Network (CNN), which predicts the support points of a flow curve which classically have to be determined in a rheometer in the laboratory. A simple network architecture consisting of a small number of convolution layers is compared with a pre-trained ResNet-18, which is fine-tuned using gel images. In a second series of experiments, rheological parameters, which alternatively need to be deduced from the flow curve in a separate step, are determined directly from the images. In the third series of experiments, the influence of different factors is tested, such as the position of the cameras relative to the direction of paddle movement and the importance of the DEMs and orthophotos in the training. It is shown in this paper that it is possible to predict the rheological properties of the ultrasonic gels with a suitable setup with a satisfying accuracy.

ASJC Scopus Sachgebiete

Zitieren

IMAGE-BASED DEEP LEARNING FOR RHEOLOGY DETERMINATION OF BINGHAM FLUIDS. / Ponick, A.; Langer, Amadeus; Beyer, D. et al.
in: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives, Jahrgang 43, Nr. B2-2022, 30.05.2022, S. 711-720.

Publikation: Beitrag in FachzeitschriftKonferenzaufsatz in FachzeitschriftForschungPeer-Review

Ponick, A, Langer, A, Beyer, D, Coenen, M, Haist, M & Heipke, C 2022, 'IMAGE-BASED DEEP LEARNING FOR RHEOLOGY DETERMINATION OF BINGHAM FLUIDS', International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives, Jg. 43, Nr. B2-2022, S. 711-720. https://doi.org/10.5194/isprs-archives-XLIII-B2-2022-711-2022
Ponick, A., Langer, A., Beyer, D., Coenen, M., Haist, M., & Heipke, C. (2022). IMAGE-BASED DEEP LEARNING FOR RHEOLOGY DETERMINATION OF BINGHAM FLUIDS. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives, 43(B2-2022), 711-720. https://doi.org/10.5194/isprs-archives-XLIII-B2-2022-711-2022
Ponick A, Langer A, Beyer D, Coenen M, Haist M, Heipke C. IMAGE-BASED DEEP LEARNING FOR RHEOLOGY DETERMINATION OF BINGHAM FLUIDS. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives. 2022 Mai 30;43(B2-2022):711-720. doi: 10.5194/isprs-archives-XLIII-B2-2022-711-2022
Ponick, A. ; Langer, Amadeus ; Beyer, D. et al. / IMAGE-BASED DEEP LEARNING FOR RHEOLOGY DETERMINATION OF BINGHAM FLUIDS. in: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives. 2022 ; Jahrgang 43, Nr. B2-2022. S. 711-720.
Download
@article{f9d059abb88e400e81fc6fd81625524e,
title = "IMAGE-BASED DEEP LEARNING FOR RHEOLOGY DETERMINATION OF BINGHAM FLUIDS",
abstract = "In this work, a method to predict the rheological properties of ultrasonic gel, as a reference substance of cement paste, is presented. For this purpose, images are taken with a stereo camera system which show a mixing paddle moving through the ultrasonic gels of different consistency, thus setting them in motion. A digital elevation model (DEM) and a corresponding orthophoto are created from the image pairs using classical image matching and orthoprojection methods. These are used as inputs into a Convolutional Neural Network (CNN), which predicts the support points of a flow curve which classically have to be determined in a rheometer in the laboratory. A simple network architecture consisting of a small number of convolution layers is compared with a pre-trained ResNet-18, which is fine-tuned using gel images. In a second series of experiments, rheological parameters, which alternatively need to be deduced from the flow curve in a separate step, are determined directly from the images. In the third series of experiments, the influence of different factors is tested, such as the position of the cameras relative to the direction of paddle movement and the importance of the DEMs and orthophotos in the training. It is shown in this paper that it is possible to predict the rheological properties of the ultrasonic gels with a suitable setup with a satisfying accuracy. ",
keywords = "Building Materials, Deep Learning, Rheology, Stereo View",
author = "A. Ponick and Amadeus Langer and D. Beyer and M. Coenen and M. Haist and C. Heipke",
note = "Funding Information: This work is supported by the Federal Ministry of Education and Research of Germany (BMBF) as part of the research project ReCyControl [Project number 0336260A], https://www. recycontrol.uni-hannover.de/de/; 2022 24th ISPRS Congress on Imaging Today, Foreseeing Tomorrow, Commission II ; Conference date: 06-06-2022 Through 11-06-2022",
year = "2022",
month = may,
day = "30",
doi = "10.5194/isprs-archives-XLIII-B2-2022-711-2022",
language = "English",
volume = "43",
pages = "711--720",
number = "B2-2022",

}

Download

TY - JOUR

T1 - IMAGE-BASED DEEP LEARNING FOR RHEOLOGY DETERMINATION OF BINGHAM FLUIDS

AU - Ponick, A.

AU - Langer, Amadeus

AU - Beyer, D.

AU - Coenen, M.

AU - Haist, M.

AU - Heipke, C.

N1 - Funding Information: This work is supported by the Federal Ministry of Education and Research of Germany (BMBF) as part of the research project ReCyControl [Project number 0336260A], https://www. recycontrol.uni-hannover.de/de/

PY - 2022/5/30

Y1 - 2022/5/30

N2 - In this work, a method to predict the rheological properties of ultrasonic gel, as a reference substance of cement paste, is presented. For this purpose, images are taken with a stereo camera system which show a mixing paddle moving through the ultrasonic gels of different consistency, thus setting them in motion. A digital elevation model (DEM) and a corresponding orthophoto are created from the image pairs using classical image matching and orthoprojection methods. These are used as inputs into a Convolutional Neural Network (CNN), which predicts the support points of a flow curve which classically have to be determined in a rheometer in the laboratory. A simple network architecture consisting of a small number of convolution layers is compared with a pre-trained ResNet-18, which is fine-tuned using gel images. In a second series of experiments, rheological parameters, which alternatively need to be deduced from the flow curve in a separate step, are determined directly from the images. In the third series of experiments, the influence of different factors is tested, such as the position of the cameras relative to the direction of paddle movement and the importance of the DEMs and orthophotos in the training. It is shown in this paper that it is possible to predict the rheological properties of the ultrasonic gels with a suitable setup with a satisfying accuracy.

AB - In this work, a method to predict the rheological properties of ultrasonic gel, as a reference substance of cement paste, is presented. For this purpose, images are taken with a stereo camera system which show a mixing paddle moving through the ultrasonic gels of different consistency, thus setting them in motion. A digital elevation model (DEM) and a corresponding orthophoto are created from the image pairs using classical image matching and orthoprojection methods. These are used as inputs into a Convolutional Neural Network (CNN), which predicts the support points of a flow curve which classically have to be determined in a rheometer in the laboratory. A simple network architecture consisting of a small number of convolution layers is compared with a pre-trained ResNet-18, which is fine-tuned using gel images. In a second series of experiments, rheological parameters, which alternatively need to be deduced from the flow curve in a separate step, are determined directly from the images. In the third series of experiments, the influence of different factors is tested, such as the position of the cameras relative to the direction of paddle movement and the importance of the DEMs and orthophotos in the training. It is shown in this paper that it is possible to predict the rheological properties of the ultrasonic gels with a suitable setup with a satisfying accuracy.

KW - Building Materials

KW - Deep Learning

KW - Rheology

KW - Stereo View

UR - http://www.scopus.com/inward/record.url?scp=85132039392&partnerID=8YFLogxK

U2 - 10.5194/isprs-archives-XLIII-B2-2022-711-2022

DO - 10.5194/isprs-archives-XLIII-B2-2022-711-2022

M3 - Conference article

AN - SCOPUS:85132039392

VL - 43

SP - 711

EP - 720

JO - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

JF - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

SN - 1682-1750

IS - B2-2022

T2 - 2022 24th ISPRS Congress on Imaging Today, Foreseeing Tomorrow, Commission II

Y2 - 6 June 2022 through 11 June 2022

ER -

Von denselben Autoren