Details
Originalsprache | Englisch |
---|---|
Titel des Sammelwerks | Proceedings 29th International Conference on Metallurgy and Materials |
Seiten | 350-355 |
Seitenumfang | 6 |
ISBN (elektronisch) | 978-80-87294-97-0 |
Publikationsstatus | Veröffentlicht - 25 Aug. 2020 |
Veranstaltung | 29th International Conference on Metallurgy and Materials, METAL 2020 - Brno, Tschechische Republik Dauer: 20 Mai 2020 → 22 Mai 2020 |
Publikationsreihe
Name | Proceedings of the conference were published in Web of Science and Scopus |
---|---|
ISSN (elektronisch) | 2694-9296 |
Abstract
A possible alternative to the established press hardening steel 22MnB5 are hot formed martensitic chromium steels. Both strength and ductility of the martensitic chromium steels can reach very high values with appropriate heat treatments. Therefore, car body parts with high crash safety can be produced by hot forming martensitic chromium steels. To identify the formability of a sheet metal, forming limit curves are state of the art. Conventional forming limit curves are recorded at room temperature and do not adequately describe the forming capacity for hot sheet metal forming as it strongly depends on temperature. Therefore, in this paper, an experimental-numerical method for determining quasi-isothermal FLC at high forming temperatures is applied to the martensitic chromium steel AISI 420C (X46Cr13) for forming temperatures between 750-1,050 °C according to its process route. The results show an increase of the formability with rising forming temperature with the highest at 1,050 °C.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Werkstoffmechanik
- Werkstoffwissenschaften (insg.)
- Metalle und Legierungen
- Werkstoffwissenschaften (insg.)
- Oberflächen, Beschichtungen und Folien
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Proceedings 29th International Conference on Metallurgy and Materials. 2020. S. 350-355 (Proceedings of the conference were published in Web of Science and Scopus).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Hot forming limit curves for numerical press hardening simulation of AISI 420C
AU - Behrens, Bernd Arno
AU - Uhe, Johanna
AU - Wester, Hendrik
AU - Stockburger, Eugen
N1 - Funding Information: The authors gratefully acknowledge the support of the German Research Foundation (DFG) within the project 385989694. Further Outokumpu Nirosta GmbH is thanked for providing the martensitic chromium steel AISI 420C for the investigations.
PY - 2020/8/25
Y1 - 2020/8/25
N2 - A possible alternative to the established press hardening steel 22MnB5 are hot formed martensitic chromium steels. Both strength and ductility of the martensitic chromium steels can reach very high values with appropriate heat treatments. Therefore, car body parts with high crash safety can be produced by hot forming martensitic chromium steels. To identify the formability of a sheet metal, forming limit curves are state of the art. Conventional forming limit curves are recorded at room temperature and do not adequately describe the forming capacity for hot sheet metal forming as it strongly depends on temperature. Therefore, in this paper, an experimental-numerical method for determining quasi-isothermal FLC at high forming temperatures is applied to the martensitic chromium steel AISI 420C (X46Cr13) for forming temperatures between 750-1,050 °C according to its process route. The results show an increase of the formability with rising forming temperature with the highest at 1,050 °C.
AB - A possible alternative to the established press hardening steel 22MnB5 are hot formed martensitic chromium steels. Both strength and ductility of the martensitic chromium steels can reach very high values with appropriate heat treatments. Therefore, car body parts with high crash safety can be produced by hot forming martensitic chromium steels. To identify the formability of a sheet metal, forming limit curves are state of the art. Conventional forming limit curves are recorded at room temperature and do not adequately describe the forming capacity for hot sheet metal forming as it strongly depends on temperature. Therefore, in this paper, an experimental-numerical method for determining quasi-isothermal FLC at high forming temperatures is applied to the martensitic chromium steel AISI 420C (X46Cr13) for forming temperatures between 750-1,050 °C according to its process route. The results show an increase of the formability with rising forming temperature with the highest at 1,050 °C.
KW - Experimental-numerical material characterisation
KW - Hot FLC
KW - Hot sheet metal forming
KW - Martensitic chromium steel
UR - http://www.scopus.com/inward/record.url?scp=85096756868&partnerID=8YFLogxK
U2 - 10.37904/metal.2020.3667
DO - 10.37904/metal.2020.3667
M3 - Conference contribution
AN - SCOPUS:85096756868
T3 - Proceedings of the conference were published in Web of Science and Scopus
SP - 350
EP - 355
BT - Proceedings 29th International Conference on Metallurgy and Materials
T2 - 29th International Conference on Metallurgy and Materials, METAL 2020
Y2 - 20 May 2020 through 22 May 2020
ER -