Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Advances in Abrasive Technology XIV |
| Seiten | 116-121 |
| Seitenumfang | 6 |
| Publikationsstatus | Elektronisch veröffentlicht (E-Pub) - 22 Aug. 2011 |
| Veranstaltung | 14th International Symposium on Advances in Abrasive Technology, ISAAT 2011 - Stuttgart, Deutschland Dauer: 18 Sept. 2011 → 21 Sept. 2011 |
Publikationsreihe
| Name | Advanced Materials Research |
|---|---|
| Band | 325 |
| ISSN (Print) | 1022-6680 |
Abstract
Steel-ceramic-composites offer a high potential as protective layers of mechanically and abrasively high loaded machine parts. The machining of steel-ceramic-composites is a high challenge for the process design due to the very different material properties of the brittle ceramic particles, embedded in the ductile steel matrix. Both materials have to be machined in ductile mode simultaneously to gain high surface qualities. Thus, the material separation mechanisms have to be understood for an adequate process design. In this paper, a new process characteristic is introduced that describes the influence of the grinding process settings on the process forces and workpiece surface roughness in grinding steel-ceramic-composites.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Allgemeiner Maschinenbau
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Advances in Abrasive Technology XIV. 2011. S. 116-121 (Advanced Materials Research; Band 325).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Grinding of Steel-Ceramic-Composites
AU - Denkena, Berend
AU - Köhler, Jens
AU - Hahmann, Dennis
PY - 2011/8/22
Y1 - 2011/8/22
N2 - Steel-ceramic-composites offer a high potential as protective layers of mechanically and abrasively high loaded machine parts. The machining of steel-ceramic-composites is a high challenge for the process design due to the very different material properties of the brittle ceramic particles, embedded in the ductile steel matrix. Both materials have to be machined in ductile mode simultaneously to gain high surface qualities. Thus, the material separation mechanisms have to be understood for an adequate process design. In this paper, a new process characteristic is introduced that describes the influence of the grinding process settings on the process forces and workpiece surface roughness in grinding steel-ceramic-composites.
AB - Steel-ceramic-composites offer a high potential as protective layers of mechanically and abrasively high loaded machine parts. The machining of steel-ceramic-composites is a high challenge for the process design due to the very different material properties of the brittle ceramic particles, embedded in the ductile steel matrix. Both materials have to be machined in ductile mode simultaneously to gain high surface qualities. Thus, the material separation mechanisms have to be understood for an adequate process design. In this paper, a new process characteristic is introduced that describes the influence of the grinding process settings on the process forces and workpiece surface roughness in grinding steel-ceramic-composites.
KW - Grinding
KW - Steel-ceramic-composites
KW - Surface roughness
UR - http://www.scopus.com/inward/record.url?scp=80053017784&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/AMR.325.116
DO - 10.4028/www.scientific.net/AMR.325.116
M3 - Conference contribution
AN - SCOPUS:80053017784
SN - 9783037852316
T3 - Advanced Materials Research
SP - 116
EP - 121
BT - Advances in Abrasive Technology XIV
T2 - 14th International Symposium on Advances in Abrasive Technology, ISAAT 2011
Y2 - 18 September 2011 through 21 September 2011
ER -