Genesis of peraluminous granites I. experimental investigation of melt compositions at 3 and 5 kb and various H2O activities

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

Organisationseinheiten

Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)935-958
Seitenumfang24
FachzeitschriftJournal of Petrology
Jahrgang32
Ausgabenummer5
PublikationsstatusVeröffentlicht - 1 Okt. 1991

Abstract

Melting experiments have been performed on a peraluminous quartzo-feldspathic gneiss from Northern Portugal. This gneiss occurs as xenoliths in the Tourem anatectic complex and is the most probable source rock for the surrounding anatectic granites. On the basis of field, petrological, and geochemical data, it can be shown that anatexis took place in the stability field of cordierite + biotite and that the evolution of magmas is the result of processes involving segregation of partial melt and separation of restite minerals.Experiments were performed at 700, 750, and 800 °C, 3 and 5 kb, and various H2O activities (aH2O) to clarify the influence of aH2O and melt fraction on the composition of the generated melts. Biotite and cordierite are the two main ferromagnesian phases observed in the run products. Cordierite is formed by incongment melting of biotite.For relatively low melt fractions (< 30-35 wt. %), the partial melts coexisting with quartz, alkali feldspar, and plagioclase have a minimum or near-minimum melt composition. The melts become richer in potassium with decreasing aH2O. This result using a natural rock as starting material is in good agreement with results achieved in the synthetic Qz-Ab-Or system. In the stability field of biotite and cordierite, the influence of aH2O on melt composition is at least as important as the effect of changing P and/or T.For higher melt fractions the composition of the melt is strongly controlled by the disappearance of alkali feldspar and the melts become richer in An and poorer in Or with increasing degree of melting.The wide range of compositions (especially for K2O, which varies from 3.5 to 5.4%) observed in the experimental peraluminous melts demonstrates that a wide variety of granitoid magmas may be produced from the same source rocks. The application of the experimental results to the Tourem anatectic complex shows that melting occurred at H2O-undersaturated conditions (4-5 wt. % H2O in the melts, corresponding to aH2O of ̃0.5 at 5 kb). Experimental melts similar in composition to the most leucocratic granite of the Tourem anatectic complex (considered to approximate the composition of the generated melt) were obtained around 800 °C, suggesting that this temperature was attained during the peak of anatexis.

ASJC Scopus Sachgebiete

Zitieren

Genesis of peraluminous granites I. experimental investigation of melt compositions at 3 and 5 kb and various H2O activities. / Holtz, François; Johannes, Wilhelm.
in: Journal of Petrology, Jahrgang 32, Nr. 5, 01.10.1991, S. 935-958.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Download
@article{97d81eebd75343a68bf5c71f3545a49a,
title = "Genesis of peraluminous granites I. experimental investigation of melt compositions at 3 and 5 kb and various H2O activities",
abstract = "Melting experiments have been performed on a peraluminous quartzo-feldspathic gneiss from Northern Portugal. This gneiss occurs as xenoliths in the Tourem anatectic complex and is the most probable source rock for the surrounding anatectic granites. On the basis of field, petrological, and geochemical data, it can be shown that anatexis took place in the stability field of cordierite + biotite and that the evolution of magmas is the result of processes involving segregation of partial melt and separation of restite minerals.Experiments were performed at 700, 750, and 800 °C, 3 and 5 kb, and various H2O activities (aH2O) to clarify the influence of aH2O and melt fraction on the composition of the generated melts. Biotite and cordierite are the two main ferromagnesian phases observed in the run products. Cordierite is formed by incongment melting of biotite.For relatively low melt fractions (< 30-35 wt. %), the partial melts coexisting with quartz, alkali feldspar, and plagioclase have a minimum or near-minimum melt composition. The melts become richer in potassium with decreasing aH2O. This result using a natural rock as starting material is in good agreement with results achieved in the synthetic Qz-Ab-Or system. In the stability field of biotite and cordierite, the influence of aH2O on melt composition is at least as important as the effect of changing P and/or T.For higher melt fractions the composition of the melt is strongly controlled by the disappearance of alkali feldspar and the melts become richer in An and poorer in Or with increasing degree of melting.The wide range of compositions (especially for K2O, which varies from 3.5 to 5.4%) observed in the experimental peraluminous melts demonstrates that a wide variety of granitoid magmas may be produced from the same source rocks. The application of the experimental results to the Tourem anatectic complex shows that melting occurred at H2O-undersaturated conditions (4-5 wt. % H2O in the melts, corresponding to aH2O of{\~ }0.5 at 5 kb). Experimental melts similar in composition to the most leucocratic granite of the Tourem anatectic complex (considered to approximate the composition of the generated melt) were obtained around 800 °C, suggesting that this temperature was attained during the peak of anatexis.",
author = "Fran{\c c}ois Holtz and Wilhelm Johannes",
note = "Funding Information: ACKNOWLEDGEMENTS This work was supported by a European Community grant (Action de Stimulation, ST2*0257), Procope (German-French scientific co-operation program), and SFB 173 of the German Science Foundation. We are grateful to D. Ziegenbein for his help at all stages of this project. The authors express their thanks to N. Le Breton and S. A. Morse for the helpful and constructive review of the manuscript. Discussion and reviews of early drafts by P. Barbey, J. Leterrier, M. Pichavant, D. Rubie, and D. Twist were particularly helpful. Technical assistance was provided by O. Diedrich, W. Hurkuck, J. Koepcke, and F. Schulze. Many thanks to all of them. Copyright: Copyright 2010 Elsevier B.V., All rights reserved.",
year = "1991",
month = oct,
day = "1",
doi = "10.1093/petrology/32.5.935",
language = "English",
volume = "32",
pages = "935--958",
journal = "Journal of Petrology",
issn = "0022-3530",
publisher = "Oxford University Press",
number = "5",

}

Download

TY - JOUR

T1 - Genesis of peraluminous granites I. experimental investigation of melt compositions at 3 and 5 kb and various H2O activities

AU - Holtz, François

AU - Johannes, Wilhelm

N1 - Funding Information: ACKNOWLEDGEMENTS This work was supported by a European Community grant (Action de Stimulation, ST2*0257), Procope (German-French scientific co-operation program), and SFB 173 of the German Science Foundation. We are grateful to D. Ziegenbein for his help at all stages of this project. The authors express their thanks to N. Le Breton and S. A. Morse for the helpful and constructive review of the manuscript. Discussion and reviews of early drafts by P. Barbey, J. Leterrier, M. Pichavant, D. Rubie, and D. Twist were particularly helpful. Technical assistance was provided by O. Diedrich, W. Hurkuck, J. Koepcke, and F. Schulze. Many thanks to all of them. Copyright: Copyright 2010 Elsevier B.V., All rights reserved.

PY - 1991/10/1

Y1 - 1991/10/1

N2 - Melting experiments have been performed on a peraluminous quartzo-feldspathic gneiss from Northern Portugal. This gneiss occurs as xenoliths in the Tourem anatectic complex and is the most probable source rock for the surrounding anatectic granites. On the basis of field, petrological, and geochemical data, it can be shown that anatexis took place in the stability field of cordierite + biotite and that the evolution of magmas is the result of processes involving segregation of partial melt and separation of restite minerals.Experiments were performed at 700, 750, and 800 °C, 3 and 5 kb, and various H2O activities (aH2O) to clarify the influence of aH2O and melt fraction on the composition of the generated melts. Biotite and cordierite are the two main ferromagnesian phases observed in the run products. Cordierite is formed by incongment melting of biotite.For relatively low melt fractions (< 30-35 wt. %), the partial melts coexisting with quartz, alkali feldspar, and plagioclase have a minimum or near-minimum melt composition. The melts become richer in potassium with decreasing aH2O. This result using a natural rock as starting material is in good agreement with results achieved in the synthetic Qz-Ab-Or system. In the stability field of biotite and cordierite, the influence of aH2O on melt composition is at least as important as the effect of changing P and/or T.For higher melt fractions the composition of the melt is strongly controlled by the disappearance of alkali feldspar and the melts become richer in An and poorer in Or with increasing degree of melting.The wide range of compositions (especially for K2O, which varies from 3.5 to 5.4%) observed in the experimental peraluminous melts demonstrates that a wide variety of granitoid magmas may be produced from the same source rocks. The application of the experimental results to the Tourem anatectic complex shows that melting occurred at H2O-undersaturated conditions (4-5 wt. % H2O in the melts, corresponding to aH2O of ̃0.5 at 5 kb). Experimental melts similar in composition to the most leucocratic granite of the Tourem anatectic complex (considered to approximate the composition of the generated melt) were obtained around 800 °C, suggesting that this temperature was attained during the peak of anatexis.

AB - Melting experiments have been performed on a peraluminous quartzo-feldspathic gneiss from Northern Portugal. This gneiss occurs as xenoliths in the Tourem anatectic complex and is the most probable source rock for the surrounding anatectic granites. On the basis of field, petrological, and geochemical data, it can be shown that anatexis took place in the stability field of cordierite + biotite and that the evolution of magmas is the result of processes involving segregation of partial melt and separation of restite minerals.Experiments were performed at 700, 750, and 800 °C, 3 and 5 kb, and various H2O activities (aH2O) to clarify the influence of aH2O and melt fraction on the composition of the generated melts. Biotite and cordierite are the two main ferromagnesian phases observed in the run products. Cordierite is formed by incongment melting of biotite.For relatively low melt fractions (< 30-35 wt. %), the partial melts coexisting with quartz, alkali feldspar, and plagioclase have a minimum or near-minimum melt composition. The melts become richer in potassium with decreasing aH2O. This result using a natural rock as starting material is in good agreement with results achieved in the synthetic Qz-Ab-Or system. In the stability field of biotite and cordierite, the influence of aH2O on melt composition is at least as important as the effect of changing P and/or T.For higher melt fractions the composition of the melt is strongly controlled by the disappearance of alkali feldspar and the melts become richer in An and poorer in Or with increasing degree of melting.The wide range of compositions (especially for K2O, which varies from 3.5 to 5.4%) observed in the experimental peraluminous melts demonstrates that a wide variety of granitoid magmas may be produced from the same source rocks. The application of the experimental results to the Tourem anatectic complex shows that melting occurred at H2O-undersaturated conditions (4-5 wt. % H2O in the melts, corresponding to aH2O of ̃0.5 at 5 kb). Experimental melts similar in composition to the most leucocratic granite of the Tourem anatectic complex (considered to approximate the composition of the generated melt) were obtained around 800 °C, suggesting that this temperature was attained during the peak of anatexis.

UR - http://www.scopus.com/inward/record.url?scp=0026282475&partnerID=8YFLogxK

U2 - 10.1093/petrology/32.5.935

DO - 10.1093/petrology/32.5.935

M3 - Article

AN - SCOPUS:0026282475

VL - 32

SP - 935

EP - 958

JO - Journal of Petrology

JF - Journal of Petrology

SN - 0022-3530

IS - 5

ER -

Von denselben Autoren