Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact processes

Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review

Autoren

  • Jens Twiefel
  • Christian Potthast
  • Maik Mracek
  • Tobias Hemsel
  • Thomas Sattel
  • Jörg Wallaschek

Externe Organisationen

  • Universität Paderborn
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)209-214
Seitenumfang6
FachzeitschriftJournal of electroceramics
Jahrgang20
Ausgabenummer3-4
PublikationsstatusVeröffentlicht - 13 Juni 2007
Extern publiziertJa

Abstract

Many ultrasonic processes are based on the mechanical contact of oscillating parts. Within ultrasonic machining (drilling, milling, grinding) micro impacts lead to abrasion at the processed workpiece and hopefully do not damage the tool. In ultrasonic motors ideally neither part gets worn. Thus the appropriate design of contact partners as well as their kinematics is a substantial task during the development of such devices. A first step to optimize contact mechanics is to understand their behavior and dependencies on parameter variations, such as vibration amplitude and pre-stress of the impacting parts. For a detailed understanding models validated with convincing experimental data from measurements are absolutely essential. This paper focuses on simple vibro-impact experiments which can be used as benchmark data for future models. The setup of the experiment and first experimental investigations are described in detail.

ASJC Scopus Sachgebiete

Zitieren

Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact processes. / Twiefel, Jens; Potthast, Christian; Mracek, Maik et al.
in: Journal of electroceramics, Jahrgang 20, Nr. 3-4, 13.06.2007, S. 209-214.

Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review

Twiefel, J, Potthast, C, Mracek, M, Hemsel, T, Sattel, T & Wallaschek, J 2007, 'Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact processes', Journal of electroceramics, Jg. 20, Nr. 3-4, S. 209-214. https://doi.org/10.1007/s10832-007-9169-4
Twiefel, J., Potthast, C., Mracek, M., Hemsel, T., Sattel, T., & Wallaschek, J. (2007). Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact processes. Journal of electroceramics, 20(3-4), 209-214. https://doi.org/10.1007/s10832-007-9169-4
Twiefel J, Potthast C, Mracek M, Hemsel T, Sattel T, Wallaschek J. Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact processes. Journal of electroceramics. 2007 Jun 13;20(3-4):209-214. doi: 10.1007/s10832-007-9169-4
Twiefel, Jens ; Potthast, Christian ; Mracek, Maik et al. / Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact processes. in: Journal of electroceramics. 2007 ; Jahrgang 20, Nr. 3-4. S. 209-214.
Download
@article{2a6e08596ea949789a0bd8838132a08b,
title = "Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact processes",
abstract = "Many ultrasonic processes are based on the mechanical contact of oscillating parts. Within ultrasonic machining (drilling, milling, grinding) micro impacts lead to abrasion at the processed workpiece and hopefully do not damage the tool. In ultrasonic motors ideally neither part gets worn. Thus the appropriate design of contact partners as well as their kinematics is a substantial task during the development of such devices. A first step to optimize contact mechanics is to understand their behavior and dependencies on parameter variations, such as vibration amplitude and pre-stress of the impacting parts. For a detailed understanding models validated with convincing experimental data from measurements are absolutely essential. This paper focuses on simple vibro-impact experiments which can be used as benchmark data for future models. The setup of the experiment and first experimental investigations are described in detail.",
keywords = "Contact measurements, Ultrasonic application, Vibro-impact",
author = "Jens Twiefel and Christian Potthast and Maik Mracek and Tobias Hemsel and Thomas Sattel and J{\"o}rg Wallaschek",
note = "Copyright: Copyright 2008 Elsevier B.V., All rights reserved.",
year = "2007",
month = jun,
day = "13",
doi = "10.1007/s10832-007-9169-4",
language = "English",
volume = "20",
pages = "209--214",
journal = "Journal of electroceramics",
issn = "1385-3449",
publisher = "Springer Netherlands",
number = "3-4",

}

Download

TY - JOUR

T1 - Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact processes

AU - Twiefel, Jens

AU - Potthast, Christian

AU - Mracek, Maik

AU - Hemsel, Tobias

AU - Sattel, Thomas

AU - Wallaschek, Jörg

N1 - Copyright: Copyright 2008 Elsevier B.V., All rights reserved.

PY - 2007/6/13

Y1 - 2007/6/13

N2 - Many ultrasonic processes are based on the mechanical contact of oscillating parts. Within ultrasonic machining (drilling, milling, grinding) micro impacts lead to abrasion at the processed workpiece and hopefully do not damage the tool. In ultrasonic motors ideally neither part gets worn. Thus the appropriate design of contact partners as well as their kinematics is a substantial task during the development of such devices. A first step to optimize contact mechanics is to understand their behavior and dependencies on parameter variations, such as vibration amplitude and pre-stress of the impacting parts. For a detailed understanding models validated with convincing experimental data from measurements are absolutely essential. This paper focuses on simple vibro-impact experiments which can be used as benchmark data for future models. The setup of the experiment and first experimental investigations are described in detail.

AB - Many ultrasonic processes are based on the mechanical contact of oscillating parts. Within ultrasonic machining (drilling, milling, grinding) micro impacts lead to abrasion at the processed workpiece and hopefully do not damage the tool. In ultrasonic motors ideally neither part gets worn. Thus the appropriate design of contact partners as well as their kinematics is a substantial task during the development of such devices. A first step to optimize contact mechanics is to understand their behavior and dependencies on parameter variations, such as vibration amplitude and pre-stress of the impacting parts. For a detailed understanding models validated with convincing experimental data from measurements are absolutely essential. This paper focuses on simple vibro-impact experiments which can be used as benchmark data for future models. The setup of the experiment and first experimental investigations are described in detail.

KW - Contact measurements

KW - Ultrasonic application

KW - Vibro-impact

UR - http://www.scopus.com/inward/record.url?scp=43249086823&partnerID=8YFLogxK

U2 - 10.1007/s10832-007-9169-4

DO - 10.1007/s10832-007-9169-4

M3 - Article

AN - SCOPUS:43249086823

VL - 20

SP - 209

EP - 214

JO - Journal of electroceramics

JF - Journal of electroceramics

SN - 1385-3449

IS - 3-4

ER -