Details
| Originalsprache | Englisch |
|---|---|
| Aufsatznummer | 052036 |
| Fachzeitschrift | Journal of Physics: Conference Series |
| Jahrgang | 1618 |
| Ausgabenummer | 5 |
| Publikationsstatus | Veröffentlicht - Sept. 2020 |
| Veranstaltung | The Science of Making Torque from Wind (TORQUE 2020) - online, Niederlande Dauer: 28 Sept. 2020 → 2 Okt. 2020 |
Abstract
Aeroelasticity is one of the biggest challenges in wind turbine rotor design, as the length of rotor blades increases which comes along with a slenderer design. The knowledge of the aeroelastic turbine behavior is of great importance. A comparison to field measurements is of huge importance when validating aeroelastic tools. However, the measurement of deformation and torsion in the field is not trivial and the conduction of realistic post-test simulations is a challenge. One crucial factor for these simulations is the wind field, which needs to be captured in a high spatial and temporal resolution. In this paper, the results of deformation measurements conducted in the field with an optical measurement method called Digital Image Correlation (DIC) on one rotor blade will be shown and compared to aeroelastic post-test simulations using highly resolved wind fields measured with a SpinnerLidar.
ASJC Scopus Sachgebiete
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Journal of Physics: Conference Series, Jahrgang 1618, Nr. 5, 052036, 09.2020.
Publikation: Beitrag in Fachzeitschrift › Konferenzaufsatz in Fachzeitschrift › Forschung › Peer-Review
}
TY - JOUR
T1 - Full scale rotor blade deformation measurements in comparison with aeroelastic simulations based on measured high-resolution wind fields
AU - Lehnhoff, S.
AU - Sekar, A. P.Kidambi
AU - Van Dooren, M. F.
AU - Kühn, M.
AU - Seume, J. R.
N1 - Funding Information: The auhtors gratefully acknowledge the financial funding from the Federal Ministry for Economic Affairs and Energy (BMWi) of Germany for the joint project SmartBlades2 (0324032A-H). We thank our colleagues at TFD, University of Oldenburg and Fraunhofer IWES for the valuable discussions concerning the results of this work. We also thank the technical staff from NREL and TFD for their support during the measurement campaign. We want to thank Fraunhofer IWES, in person Paul Feja for building and providing the FAST-model of the wind turbine and Tobias Meyer for developing and providing the controller of the turbine. In the end, we want to thank the whole SmartBlades2 consortium for the organization and realization of the measurement campaign.
PY - 2020/9
Y1 - 2020/9
N2 - Aeroelasticity is one of the biggest challenges in wind turbine rotor design, as the length of rotor blades increases which comes along with a slenderer design. The knowledge of the aeroelastic turbine behavior is of great importance. A comparison to field measurements is of huge importance when validating aeroelastic tools. However, the measurement of deformation and torsion in the field is not trivial and the conduction of realistic post-test simulations is a challenge. One crucial factor for these simulations is the wind field, which needs to be captured in a high spatial and temporal resolution. In this paper, the results of deformation measurements conducted in the field with an optical measurement method called Digital Image Correlation (DIC) on one rotor blade will be shown and compared to aeroelastic post-test simulations using highly resolved wind fields measured with a SpinnerLidar.
AB - Aeroelasticity is one of the biggest challenges in wind turbine rotor design, as the length of rotor blades increases which comes along with a slenderer design. The knowledge of the aeroelastic turbine behavior is of great importance. A comparison to field measurements is of huge importance when validating aeroelastic tools. However, the measurement of deformation and torsion in the field is not trivial and the conduction of realistic post-test simulations is a challenge. One crucial factor for these simulations is the wind field, which needs to be captured in a high spatial and temporal resolution. In this paper, the results of deformation measurements conducted in the field with an optical measurement method called Digital Image Correlation (DIC) on one rotor blade will be shown and compared to aeroelastic post-test simulations using highly resolved wind fields measured with a SpinnerLidar.
UR - http://www.scopus.com/inward/record.url?scp=85092335194&partnerID=8YFLogxK
U2 - 10.1088/1742-6596/1618/5/052036
DO - 10.1088/1742-6596/1618/5/052036
M3 - Conference article
AN - SCOPUS:85092335194
VL - 1618
JO - Journal of Physics: Conference Series
JF - Journal of Physics: Conference Series
SN - 1742-6588
IS - 5
M1 - 052036
T2 - The Science of Making Torque from Wind (TORQUE 2020)
Y2 - 28 September 2020 through 2 October 2020
ER -