Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 715-722 |
| Seitenumfang | 8 |
| Fachzeitschrift | Production Engineering |
| Jahrgang | 12 |
| Ausgabenummer | 6 |
| Frühes Online-Datum | 30 Aug. 2018 |
| Publikationsstatus | Veröffentlicht - Dez. 2018 |
Abstract
The machining of complex geometries and deep cavities requires the use of long projecting tool holders. However, due to their high length-to-diameter ratio, these tool holders have a high degree of static and dynamic compliance. High dynamic compliance reduces process stability and thus productivity. A new approach to lessen this is to increase the damping of long projecting tool holders by using friction dampers integrated into the tool holder shaft. The mathematical description and experimental testing of large friction-damped tool holders are the subject of this paper. With the aid of experimental modal analysis and cutting tests, the dynamic compliance and maximal cutting depth were determined. Due to the integration of friction segments in the tool holder shaft, the maximal depth of cut could be increased about 75% compared to a reference tool holder with the same diameter and length configuration.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Maschinenbau
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Production Engineering, Jahrgang 12, Nr. 6, 12.2018, S. 715-722.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Frictionally damped tool holder for long projection cutting tools
AU - Denkena, Berend
AU - Bergmann, Benjamin
AU - Teige, Christian
PY - 2018/12
Y1 - 2018/12
N2 - The machining of complex geometries and deep cavities requires the use of long projecting tool holders. However, due to their high length-to-diameter ratio, these tool holders have a high degree of static and dynamic compliance. High dynamic compliance reduces process stability and thus productivity. A new approach to lessen this is to increase the damping of long projecting tool holders by using friction dampers integrated into the tool holder shaft. The mathematical description and experimental testing of large friction-damped tool holders are the subject of this paper. With the aid of experimental modal analysis and cutting tests, the dynamic compliance and maximal cutting depth were determined. Due to the integration of friction segments in the tool holder shaft, the maximal depth of cut could be increased about 75% compared to a reference tool holder with the same diameter and length configuration.
AB - The machining of complex geometries and deep cavities requires the use of long projecting tool holders. However, due to their high length-to-diameter ratio, these tool holders have a high degree of static and dynamic compliance. High dynamic compliance reduces process stability and thus productivity. A new approach to lessen this is to increase the damping of long projecting tool holders by using friction dampers integrated into the tool holder shaft. The mathematical description and experimental testing of large friction-damped tool holders are the subject of this paper. With the aid of experimental modal analysis and cutting tests, the dynamic compliance and maximal cutting depth were determined. Due to the integration of friction segments in the tool holder shaft, the maximal depth of cut could be increased about 75% compared to a reference tool holder with the same diameter and length configuration.
KW - Damping
KW - Friction
KW - Process stability
KW - Tool holder
UR - http://www.scopus.com/inward/record.url?scp=85052818778&partnerID=8YFLogxK
U2 - 10.1007/s11740-018-0847-7
DO - 10.1007/s11740-018-0847-7
M3 - Article
AN - SCOPUS:85052818778
VL - 12
SP - 715
EP - 722
JO - Production Engineering
JF - Production Engineering
SN - 0944-6524
IS - 6
ER -