Friction and wear behaviour of polymer/steel and alumina/alumina under high-frequency fretting conditions

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

  • Peter Rehbein
  • Jörg Wallaschek

Externe Organisationen

  • Robert Bosch GmbH
  • Universität Paderborn
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)97-105
Seitenumfang9
FachzeitschriftWEAR
Jahrgang216
Ausgabenummer2
PublikationsstatusVeröffentlicht - 1 Apr. 1998
Extern publiziertJa

Abstract

A test rig was developed for high-frequency fretting conditions (20 kHz, 4.5-24 μm amplitudes) with superimposed macroscopic sliding (1 Hz, 1-10 mm stroke length). Using this tribometer, the high-frequency frictional behaviour and wear characteristics of PTFE, PTFE + 10% carbon fibres, PI, PI + 30% PTFE, PI + 20% carbon fibres and PI + 20% carbon fibres + 20% PTFE on 100Cr6 were studied with respect to their application as contact materials in travelling wave piezoelectric ultrasonic motors. The experimental results obtained for alumina on alumina, which is frequently used in micropush motors, are also discussed.

ASJC Scopus Sachgebiete

Zitieren

Friction and wear behaviour of polymer/steel and alumina/alumina under high-frequency fretting conditions. / Rehbein, Peter; Wallaschek, Jörg.
in: WEAR, Jahrgang 216, Nr. 2, 01.04.1998, S. 97-105.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Rehbein P, Wallaschek J. Friction and wear behaviour of polymer/steel and alumina/alumina under high-frequency fretting conditions. WEAR. 1998 Apr 1;216(2):97-105. doi: 10.1016/S0043-1648(97)00163-4
Rehbein, Peter ; Wallaschek, Jörg. / Friction and wear behaviour of polymer/steel and alumina/alumina under high-frequency fretting conditions. in: WEAR. 1998 ; Jahrgang 216, Nr. 2. S. 97-105.
Download
@article{580a522306614c1998a45b6193504d84,
title = "Friction and wear behaviour of polymer/steel and alumina/alumina under high-frequency fretting conditions",
abstract = "A test rig was developed for high-frequency fretting conditions (20 kHz, 4.5-24 μm amplitudes) with superimposed macroscopic sliding (1 Hz, 1-10 mm stroke length). Using this tribometer, the high-frequency frictional behaviour and wear characteristics of PTFE, PTFE + 10% carbon fibres, PI, PI + 30% PTFE, PI + 20% carbon fibres and PI + 20% carbon fibres + 20% PTFE on 100Cr6 were studied with respect to their application as contact materials in travelling wave piezoelectric ultrasonic motors. The experimental results obtained for alumina on alumina, which is frequently used in micropush motors, are also discussed.",
keywords = "Alumina, Friction and wear characteristics, High-frequency tribometer, Polymer/steel",
author = "Peter Rehbein and J{\"o}rg Wallaschek",
note = "Copyright: Copyright 2017 Elsevier B.V., All rights reserved.",
year = "1998",
month = apr,
day = "1",
doi = "10.1016/S0043-1648(97)00163-4",
language = "English",
volume = "216",
pages = "97--105",
journal = "WEAR",
issn = "0043-1648",
publisher = "Elsevier BV",
number = "2",

}

Download

TY - JOUR

T1 - Friction and wear behaviour of polymer/steel and alumina/alumina under high-frequency fretting conditions

AU - Rehbein, Peter

AU - Wallaschek, Jörg

N1 - Copyright: Copyright 2017 Elsevier B.V., All rights reserved.

PY - 1998/4/1

Y1 - 1998/4/1

N2 - A test rig was developed for high-frequency fretting conditions (20 kHz, 4.5-24 μm amplitudes) with superimposed macroscopic sliding (1 Hz, 1-10 mm stroke length). Using this tribometer, the high-frequency frictional behaviour and wear characteristics of PTFE, PTFE + 10% carbon fibres, PI, PI + 30% PTFE, PI + 20% carbon fibres and PI + 20% carbon fibres + 20% PTFE on 100Cr6 were studied with respect to their application as contact materials in travelling wave piezoelectric ultrasonic motors. The experimental results obtained for alumina on alumina, which is frequently used in micropush motors, are also discussed.

AB - A test rig was developed for high-frequency fretting conditions (20 kHz, 4.5-24 μm amplitudes) with superimposed macroscopic sliding (1 Hz, 1-10 mm stroke length). Using this tribometer, the high-frequency frictional behaviour and wear characteristics of PTFE, PTFE + 10% carbon fibres, PI, PI + 30% PTFE, PI + 20% carbon fibres and PI + 20% carbon fibres + 20% PTFE on 100Cr6 were studied with respect to their application as contact materials in travelling wave piezoelectric ultrasonic motors. The experimental results obtained for alumina on alumina, which is frequently used in micropush motors, are also discussed.

KW - Alumina

KW - Friction and wear characteristics

KW - High-frequency tribometer

KW - Polymer/steel

UR - http://www.scopus.com/inward/record.url?scp=0032052939&partnerID=8YFLogxK

U2 - 10.1016/S0043-1648(97)00163-4

DO - 10.1016/S0043-1648(97)00163-4

M3 - Article

AN - SCOPUS:0032052939

VL - 216

SP - 97

EP - 105

JO - WEAR

JF - WEAR

SN - 0043-1648

IS - 2

ER -