Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 290-296 |
| Seitenumfang | 7 |
| Fachzeitschrift | Journal of tribology |
| Jahrgang | 114 |
| Ausgabenummer | 2 |
| Publikationsstatus | Veröffentlicht - Apr. 1992 |
| Extern publiziert | Ja |
Abstract
The development of models for the elastohydrodynamic lubrication of rotary lip seals requires the measurement of the film thickness under a real seal. A new method has been developed for this purpose which is based on the use of lubricant oils in which magnetite particles are suspended (so-called magnetic fluids). A change in the fluid film thickness will create a change in the impedance of the coil of the measuring circuit, the magnetic flux of which is directed through the oil film of the contact area. The advantage of this technique is that minimal modifications have to be applied to the tribological system under examination. Initial measurements carried out with a model rubber lip seal provided new insight into the build-up of a lubricant film as a function of the rotary speed and allowed comparison with the results of a theoretical model for the analysis of lip seal lubrication developed in parallel.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Werkstoffmechanik
- Ingenieurwesen (insg.)
- Maschinenbau
- Physik und Astronomie (insg.)
- Oberflächen und Grenzflächen
- Werkstoffwissenschaften (insg.)
- Oberflächen, Beschichtungen und Folien
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Journal of tribology, Jahrgang 114, Nr. 2, 04.1992, S. 290-296.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Formation of lubricant film in rotary sealing contacts
T2 - Part II-A new measuring principle for lubricant film thickness
AU - Poll, G.
AU - Gabelli, A.
PY - 1992/4
Y1 - 1992/4
N2 - The development of models for the elastohydrodynamic lubrication of rotary lip seals requires the measurement of the film thickness under a real seal. A new method has been developed for this purpose which is based on the use of lubricant oils in which magnetite particles are suspended (so-called magnetic fluids). A change in the fluid film thickness will create a change in the impedance of the coil of the measuring circuit, the magnetic flux of which is directed through the oil film of the contact area. The advantage of this technique is that minimal modifications have to be applied to the tribological system under examination. Initial measurements carried out with a model rubber lip seal provided new insight into the build-up of a lubricant film as a function of the rotary speed and allowed comparison with the results of a theoretical model for the analysis of lip seal lubrication developed in parallel.
AB - The development of models for the elastohydrodynamic lubrication of rotary lip seals requires the measurement of the film thickness under a real seal. A new method has been developed for this purpose which is based on the use of lubricant oils in which magnetite particles are suspended (so-called magnetic fluids). A change in the fluid film thickness will create a change in the impedance of the coil of the measuring circuit, the magnetic flux of which is directed through the oil film of the contact area. The advantage of this technique is that minimal modifications have to be applied to the tribological system under examination. Initial measurements carried out with a model rubber lip seal provided new insight into the build-up of a lubricant film as a function of the rotary speed and allowed comparison with the results of a theoretical model for the analysis of lip seal lubrication developed in parallel.
UR - http://www.scopus.com/inward/record.url?scp=0026848066&partnerID=8YFLogxK
U2 - 10.1115/1.2920886
DO - 10.1115/1.2920886
M3 - Article
AN - SCOPUS:0026848066
VL - 114
SP - 290
EP - 296
JO - Journal of tribology
JF - Journal of tribology
SN - 0742-4787
IS - 2
ER -