Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 1340-1347 |
| Seitenumfang | 8 |
| Fachzeitschrift | Steel research international |
| Jahrgang | 85 |
| Ausgabenummer | 9 |
| Publikationsstatus | Veröffentlicht - 27 Feb. 2014 |
Abstract
Processing of thin metal sheets of air-hardening steels differs from the usual processing and includes deep drawing in the ferritic condition, a cutting operation and a thermal treatment of austenitizing, air quenching and an optional tempering, respectively. The mechanical properties of the low carbon steel LH800 increase due to air-hardening, e.g., the tensile strength rises from about 480 MPa in the as-delivered ferritic condition up to more than 1000 MPa in the martensitic condition. The experimental work aims to create a dual phase microstructure consisting of martensite and ferrite by austenitizing below the Ac3 temperature and to characterize the mechanical properties. Based on the experimental data mechanical properties and microstructural parameters could be correlated. For example, the tensile strength can be calculated using the rule of mixture for the microstructure fractions of martensite and ferrite. The yield stress can be predicted by extending the rule of mixture regarding the Hall-Petch equation. As the results reveal the mechanical properties can be controlled very well regarding tensile strength and yield stress by austenitizing at comparatively low temperatures. The experimental study presents results of the formation of a dual phase microstructure and the depending property evolution in a low carbon air-hardening steel. Correlations between strength properties and microstructural parameters size are determined.
ASJC Scopus Sachgebiete
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
- Chemie (insg.)
- Physikalische und Theoretische Chemie
- Werkstoffwissenschaften (insg.)
- Metalle und Legierungen
- Werkstoffwissenschaften (insg.)
- Werkstoffchemie
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Steel research international, Jahrgang 85, Nr. 9, 27.02.2014, S. 1340-1347.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Formation and Properties of Mixed Ferritic–Martensitic Microstructures in the Air‐Hardening Steel LH800
AU - Grydin, Olexandr
AU - Nuernberger, Florian
AU - Zou, Ying
AU - Schaper, Mirko
AU - Brosius, Alexander
PY - 2014/2/27
Y1 - 2014/2/27
N2 - Processing of thin metal sheets of air-hardening steels differs from the usual processing and includes deep drawing in the ferritic condition, a cutting operation and a thermal treatment of austenitizing, air quenching and an optional tempering, respectively. The mechanical properties of the low carbon steel LH800 increase due to air-hardening, e.g., the tensile strength rises from about 480 MPa in the as-delivered ferritic condition up to more than 1000 MPa in the martensitic condition. The experimental work aims to create a dual phase microstructure consisting of martensite and ferrite by austenitizing below the Ac3 temperature and to characterize the mechanical properties. Based on the experimental data mechanical properties and microstructural parameters could be correlated. For example, the tensile strength can be calculated using the rule of mixture for the microstructure fractions of martensite and ferrite. The yield stress can be predicted by extending the rule of mixture regarding the Hall-Petch equation. As the results reveal the mechanical properties can be controlled very well regarding tensile strength and yield stress by austenitizing at comparatively low temperatures. The experimental study presents results of the formation of a dual phase microstructure and the depending property evolution in a low carbon air-hardening steel. Correlations between strength properties and microstructural parameters size are determined.
AB - Processing of thin metal sheets of air-hardening steels differs from the usual processing and includes deep drawing in the ferritic condition, a cutting operation and a thermal treatment of austenitizing, air quenching and an optional tempering, respectively. The mechanical properties of the low carbon steel LH800 increase due to air-hardening, e.g., the tensile strength rises from about 480 MPa in the as-delivered ferritic condition up to more than 1000 MPa in the martensitic condition. The experimental work aims to create a dual phase microstructure consisting of martensite and ferrite by austenitizing below the Ac3 temperature and to characterize the mechanical properties. Based on the experimental data mechanical properties and microstructural parameters could be correlated. For example, the tensile strength can be calculated using the rule of mixture for the microstructure fractions of martensite and ferrite. The yield stress can be predicted by extending the rule of mixture regarding the Hall-Petch equation. As the results reveal the mechanical properties can be controlled very well regarding tensile strength and yield stress by austenitizing at comparatively low temperatures. The experimental study presents results of the formation of a dual phase microstructure and the depending property evolution in a low carbon air-hardening steel. Correlations between strength properties and microstructural parameters size are determined.
KW - dual phase microstructure
KW - LH800
KW - mechanical properties
KW - metallographical analysis
KW - microstructural parameters
UR - http://www.scopus.com/inward/record.url?scp=84906847187&partnerID=8YFLogxK
U2 - 10.1002/srin.201300420
DO - 10.1002/srin.201300420
M3 - Article
AN - SCOPUS:84906847187
VL - 85
SP - 1340
EP - 1347
JO - Steel research international
JF - Steel research international
SN - 1611-3683
IS - 9
ER -