Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Lecture Notes in Production Engineering |
| Herausgeber (Verlag) | Springer Nature |
| Seiten | 246-255 |
| Seitenumfang | 10 |
| ISBN (elektronisch) | 978-3-031-18318-8 |
| ISBN (Print) | 978-3-031-18317-1 |
| Publikationsstatus | Veröffentlicht - 2 Feb. 2023 |
Publikationsreihe
| Name | Lecture Notes in Production Engineering |
|---|---|
| Band | Part F1163 |
| ISSN (Print) | 2194-0525 |
| ISSN (elektronisch) | 2194-0533 |
Abstract
This paper contains the first steps for an analysis of the fluid dynamics in a circular sawing process with an internal cooling as part of an ongoing project. The analysis takes place with a test rig for orthogonal cutting of the IfW of the University of Stuttgart, which is modified to be able to create an artificial narrow closed cutting gap. It is built with sapphire glasses on the sides to make the fluid dynamics and the chip formation in the gap visible and analyzable. The investigation of the fluid dynamics carried out with the PIVLab software, which is a module in Matlab.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
- Volkswirtschaftslehre, Ökonometrie und Finanzen (insg.)
- Volkswirtschaftslehre, Ökonometrie und Finanzen (sonstige)
- Ingenieurwesen (insg.)
- Sicherheit, Risiko, Zuverlässigkeit und Qualität
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Lecture Notes in Production Engineering. Springer Nature, 2023. S. 246-255 (Lecture Notes in Production Engineering; Band Part F1163).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Beitrag in Buch/Sammelwerk › Forschung › Peer-Review
}
TY - CHAP
T1 - Fluid Dynamics and Influence of an Internal Coolant Supply in the Sawing Process
AU - Menze, C.
AU - Itterheim, M.
AU - Möhring, H. C.
AU - Stegmann, J.
AU - Kabelac, S.
N1 - Funding Information: Acknowledgement. The authors appreciate the funding by the German Research Foundation (DFG) – project number 439925537.
PY - 2023/2/2
Y1 - 2023/2/2
N2 - This paper contains the first steps for an analysis of the fluid dynamics in a circular sawing process with an internal cooling as part of an ongoing project. The analysis takes place with a test rig for orthogonal cutting of the IfW of the University of Stuttgart, which is modified to be able to create an artificial narrow closed cutting gap. It is built with sapphire glasses on the sides to make the fluid dynamics and the chip formation in the gap visible and analyzable. The investigation of the fluid dynamics carried out with the PIVLab software, which is a module in Matlab.
AB - This paper contains the first steps for an analysis of the fluid dynamics in a circular sawing process with an internal cooling as part of an ongoing project. The analysis takes place with a test rig for orthogonal cutting of the IfW of the University of Stuttgart, which is modified to be able to create an artificial narrow closed cutting gap. It is built with sapphire glasses on the sides to make the fluid dynamics and the chip formation in the gap visible and analyzable. The investigation of the fluid dynamics carried out with the PIVLab software, which is a module in Matlab.
KW - Coolant
KW - Fluid dynamics
KW - Sawing
UR - http://www.scopus.com/inward/record.url?scp=85166676063&partnerID=8YFLogxK
U2 - 10.1007/978-3-031-18318-8_26
DO - 10.1007/978-3-031-18318-8_26
M3 - Contribution to book/anthology
AN - SCOPUS:85166676063
SN - 978-3-031-18317-1
T3 - Lecture Notes in Production Engineering
SP - 246
EP - 255
BT - Lecture Notes in Production Engineering
PB - Springer Nature
ER -