Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Thermal Process Modeling - Proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation, ICTPMCS 2014 |
| Herausgeber/-innen | Rozalia Papp, Scott MacKenzie, Robert Goldstein, B. Lynn Ferguson |
| Herausgeber (Verlag) | ASM International |
| Seiten | 59-64 |
| Seitenumfang | 6 |
| ISBN (elektronisch) | 1627080686 |
| Publikationsstatus | Veröffentlicht - 1 Jan. 2014 |
| Veranstaltung | 5th International Conference on Thermal Process Modeling and Computer Simulation, ICTPMCS 2014 - Orlando, USA / Vereinigte Staaten Dauer: 16 Juni 2014 → 18 Juni 2014 |
Publikationsreihe
| Name | Thermal Process Modeling - Proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation, ICTPMCS 2014 |
|---|
Abstract
This article focuses on a numerical analysis of the tool load during a forming process in a semi-solid state. First, a numerical model has been developed to study the effects of die/punch temperature, initial solid fraction and punch speed on the semi-solid forming process. Moreover, realistic numerical modeling of flow behavior is important to investigate the mechanical and thermal induced stresses in the tool. To investigate the thixoforming process a two phase model for the material behavior has been implemented: one for the solid material and the other for the semi-solid state. At temperatures below the solidus temperature the material is described by means of flow curves and above the solidus temperature the viscosity curves are used to model the flow behavior. The solid fraction of the melt is directly linked to the current temperature and is calculated using Scheil- Guilliver equation. The model equations are implemented into the FEA software simufact.forming GP v1O and used for the simulation of a characteristic thixoforming process. The aim of this work is to evaluate the thermal and mechanical loads on the tools during the steel thixoforging process.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Allgemeine Materialwissenschaften
- Mathematik (insg.)
- Modellierung und Simulation
- Chemische Verfahrenstechnik (insg.)
- Fließ- und Transferprozesse von Flüssigkeiten
- Ingenieurwesen (insg.)
- Werkstoffmechanik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Thermal Process Modeling - Proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation, ICTPMCS 2014. Hrsg. / Rozalia Papp; Scott MacKenzie; Robert Goldstein; B. Lynn Ferguson. ASM International, 2014. S. 59-64 (Thermal Process Modeling - Proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation, ICTPMCS 2014).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Finite element analysis of the tool load during manufacturing of a flange in a semi-solid state
AU - Behrens, Bernd Arno
AU - Matthias, Thorsten
PY - 2014/1/1
Y1 - 2014/1/1
N2 - This article focuses on a numerical analysis of the tool load during a forming process in a semi-solid state. First, a numerical model has been developed to study the effects of die/punch temperature, initial solid fraction and punch speed on the semi-solid forming process. Moreover, realistic numerical modeling of flow behavior is important to investigate the mechanical and thermal induced stresses in the tool. To investigate the thixoforming process a two phase model for the material behavior has been implemented: one for the solid material and the other for the semi-solid state. At temperatures below the solidus temperature the material is described by means of flow curves and above the solidus temperature the viscosity curves are used to model the flow behavior. The solid fraction of the melt is directly linked to the current temperature and is calculated using Scheil- Guilliver equation. The model equations are implemented into the FEA software simufact.forming GP v1O and used for the simulation of a characteristic thixoforming process. The aim of this work is to evaluate the thermal and mechanical loads on the tools during the steel thixoforging process.
AB - This article focuses on a numerical analysis of the tool load during a forming process in a semi-solid state. First, a numerical model has been developed to study the effects of die/punch temperature, initial solid fraction and punch speed on the semi-solid forming process. Moreover, realistic numerical modeling of flow behavior is important to investigate the mechanical and thermal induced stresses in the tool. To investigate the thixoforming process a two phase model for the material behavior has been implemented: one for the solid material and the other for the semi-solid state. At temperatures below the solidus temperature the material is described by means of flow curves and above the solidus temperature the viscosity curves are used to model the flow behavior. The solid fraction of the melt is directly linked to the current temperature and is calculated using Scheil- Guilliver equation. The model equations are implemented into the FEA software simufact.forming GP v1O and used for the simulation of a characteristic thixoforming process. The aim of this work is to evaluate the thermal and mechanical loads on the tools during the steel thixoforging process.
UR - http://www.scopus.com/inward/record.url?scp=84916217132&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:84916217132
T3 - Thermal Process Modeling - Proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation, ICTPMCS 2014
SP - 59
EP - 64
BT - Thermal Process Modeling - Proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation, ICTPMCS 2014
A2 - Papp, Rozalia
A2 - MacKenzie, Scott
A2 - Goldstein, Robert
A2 - Ferguson, B. Lynn
PB - ASM International
T2 - 5th International Conference on Thermal Process Modeling and Computer Simulation, ICTPMCS 2014
Y2 - 16 June 2014 through 18 June 2014
ER -