Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | 2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, CLEO/Europe-EQEC 2019 |
| Herausgeber (Verlag) | Institute of Electrical and Electronics Engineers Inc. |
| Seitenumfang | 1 |
| ISBN (elektronisch) | 978-1-7281-0469-0 |
| ISBN (Print) | 978-1-7281-0470-6 |
| Publikationsstatus | Veröffentlicht - 2019 |
| Veranstaltung | 2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, CLEO/Europe-EQEC 2019 - Munich, Deutschland Dauer: 23 Juni 2019 → 27 Juni 2019 |
Publikationsreihe
| Name | Optics InfoBase Conference Papers |
|---|---|
| Band | Part F140-CLEO_Europe 2019 |
Abstract
Writing waveguides with femtosecond laser is a very promising technique and has already proven its performance in glasses and crystals. At the same time, writing waveguides in polymers is a just developing field, and not too much work has been reported so far [1]. Polymer material can offer the potential to create low-cost and complex structures inside the volume of the material. It was demonstrated before that it is possible to make low-loss waveguides inside polymer material with a femtosecond laser by writing irradiation lines with parallel orientation with fixed gap between them [2]. The refractive index increase is induced by material compression and stress-related effects which are caused by a quickly expanding plasma core. Here we want to show different geometries of waveguides and also waveguides which are sensing the surface of the substrate and Y-splitters, which could possibly be used for applications such as sensors and lab-on-a-chip devices. When the irradiation lines form a hexagon or quadratic geometry (see Fig. 1(a) and Fig 1(b)) it leads to an increasing densification and as a result higher refractive index. As a consequence, the higher refractive index will reduce bend losses in waveguides.
ASJC Scopus Sachgebiete
- Chemie (insg.)
- Spektroskopie
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Physik und Astronomie (insg.)
- Instrumentierung
- Physik und Astronomie (insg.)
- Atom- und Molekularphysik sowie Optik
- Informatik (insg.)
- Computernetzwerke und -kommunikation
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, CLEO/Europe-EQEC 2019. Institute of Electrical and Electronics Engineers Inc., 2019. 8871550 (Optics InfoBase Conference Papers; Band Part F140-CLEO_Europe 2019).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Femtosecond writing of waveguides and waveguide network components
AU - Perevoznik, Dmitrii
AU - Morgner, Uwe
N1 - Publisher Copyright: © 2019 IEEE.
PY - 2019
Y1 - 2019
N2 - Writing waveguides with femtosecond laser is a very promising technique and has already proven its performance in glasses and crystals. At the same time, writing waveguides in polymers is a just developing field, and not too much work has been reported so far [1]. Polymer material can offer the potential to create low-cost and complex structures inside the volume of the material. It was demonstrated before that it is possible to make low-loss waveguides inside polymer material with a femtosecond laser by writing irradiation lines with parallel orientation with fixed gap between them [2]. The refractive index increase is induced by material compression and stress-related effects which are caused by a quickly expanding plasma core. Here we want to show different geometries of waveguides and also waveguides which are sensing the surface of the substrate and Y-splitters, which could possibly be used for applications such as sensors and lab-on-a-chip devices. When the irradiation lines form a hexagon or quadratic geometry (see Fig. 1(a) and Fig 1(b)) it leads to an increasing densification and as a result higher refractive index. As a consequence, the higher refractive index will reduce bend losses in waveguides.
AB - Writing waveguides with femtosecond laser is a very promising technique and has already proven its performance in glasses and crystals. At the same time, writing waveguides in polymers is a just developing field, and not too much work has been reported so far [1]. Polymer material can offer the potential to create low-cost and complex structures inside the volume of the material. It was demonstrated before that it is possible to make low-loss waveguides inside polymer material with a femtosecond laser by writing irradiation lines with parallel orientation with fixed gap between them [2]. The refractive index increase is induced by material compression and stress-related effects which are caused by a quickly expanding plasma core. Here we want to show different geometries of waveguides and also waveguides which are sensing the surface of the substrate and Y-splitters, which could possibly be used for applications such as sensors and lab-on-a-chip devices. When the irradiation lines form a hexagon or quadratic geometry (see Fig. 1(a) and Fig 1(b)) it leads to an increasing densification and as a result higher refractive index. As a consequence, the higher refractive index will reduce bend losses in waveguides.
UR - http://www.scopus.com/inward/record.url?scp=85074663168&partnerID=8YFLogxK
U2 - 10.1109/CLEOE-EQEC.2019.8871550
DO - 10.1109/CLEOE-EQEC.2019.8871550
M3 - Conference contribution
AN - SCOPUS:85074663168
SN - 978-1-7281-0470-6
T3 - Optics InfoBase Conference Papers
BT - 2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, CLEO/Europe-EQEC 2019
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, CLEO/Europe-EQEC 2019
Y2 - 23 June 2019 through 27 June 2019
ER -