Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011 |
| Seiten | 477-481 |
| Seitenumfang | 5 |
| Publikationsstatus | Veröffentlicht - 1 Dez. 2011 |
| Veranstaltung | 10th International Conference on Technology of Plasticity, ICTP 2011 - Aachen, Deutschland Dauer: 25 Sept. 2011 → 30 Sept. 2011 |
Publikationsreihe
| Name | Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011 |
|---|
Abstract
A three-dimensional model for the numerical simulation of a coupled injection molding sheet metal forming process will be presented. The material behaviour of the sheet metal component has been considered to be elasto-thermoplastic. For this purpose, the commercial finite element method package LS-Dyna is used for the simulation. Currently, LS-Dyna does not provide the possibility to consider the heat transfer between the plastic melt and the sheet component within fluid structure interaction simulations. In order to account for the temperature increase in the sheet metal component due to the contact with the melt, additional thermal boundary conditions have been applied on the workpiece. A comparison between simulation and experimental results shows a high agreement with regard to the forming characteristics of the sheet during the injection phase. Depending on the pseudoplastic flow properties of the plastic melt the pressure development in the cavity is also predicted with a high accuracy.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Polymere und Kunststoffe
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. 2011. S. 477-481 (Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - FE simulation of a coupled injection molding sheet metal forming process
AU - Behrens, B. A.
AU - Bouguecha, A.
AU - Götze, T.
PY - 2011/12/1
Y1 - 2011/12/1
N2 - A three-dimensional model for the numerical simulation of a coupled injection molding sheet metal forming process will be presented. The material behaviour of the sheet metal component has been considered to be elasto-thermoplastic. For this purpose, the commercial finite element method package LS-Dyna is used for the simulation. Currently, LS-Dyna does not provide the possibility to consider the heat transfer between the plastic melt and the sheet component within fluid structure interaction simulations. In order to account for the temperature increase in the sheet metal component due to the contact with the melt, additional thermal boundary conditions have been applied on the workpiece. A comparison between simulation and experimental results shows a high agreement with regard to the forming characteristics of the sheet during the injection phase. Depending on the pseudoplastic flow properties of the plastic melt the pressure development in the cavity is also predicted with a high accuracy.
AB - A three-dimensional model for the numerical simulation of a coupled injection molding sheet metal forming process will be presented. The material behaviour of the sheet metal component has been considered to be elasto-thermoplastic. For this purpose, the commercial finite element method package LS-Dyna is used for the simulation. Currently, LS-Dyna does not provide the possibility to consider the heat transfer between the plastic melt and the sheet component within fluid structure interaction simulations. In order to account for the temperature increase in the sheet metal component due to the contact with the melt, additional thermal boundary conditions have been applied on the workpiece. A comparison between simulation and experimental results shows a high agreement with regard to the forming characteristics of the sheet during the injection phase. Depending on the pseudoplastic flow properties of the plastic melt the pressure development in the cavity is also predicted with a high accuracy.
KW - Finite element method (FEM)
KW - Fluid structure interaction (FSI)
KW - Sheet metal forming
UR - http://www.scopus.com/inward/record.url?scp=84898060684&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:84898060684
SN - 9783514007840
T3 - Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011
SP - 477
EP - 481
BT - Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011
T2 - 10th International Conference on Technology of Plasticity, ICTP 2011
Y2 - 25 September 2011 through 30 September 2011
ER -