Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Optical Interconnects XXII |
| Herausgeber/-innen | Ray T. Chen, Henning Schroder |
| Herausgeber (Verlag) | SPIE |
| ISBN (elektronisch) | 9781510648852 |
| Publikationsstatus | Veröffentlicht - 2022 |
| Veranstaltung | Optical Interconnects XXII 2022 - Virtual, Online Dauer: 20 Feb. 2022 → 24 Feb. 2022 |
Publikationsreihe
| Name | Proceedings of SPIE - The International Society for Optical Engineering |
|---|---|
| Band | 12007 |
| ISSN (Print) | 0277-786X |
| ISSN (elektronisch) | 1996-756X |
Abstract
Printing optical waveguides is an approach to the high volume implementation of optical data transmission in conventional electronic systems. Flexographic printing enables the manufacturing of circular segment-shaped polymer waveguides on planar substrates, which show great potential as economic Gbit/s-capable short-range networks. This work describes a process chain to manufacture and integrate a printed optical data transmission path in conventional printed circuit boards (PCB). This sequence of processes gives an outlook on up-scaling utilizing printed optical waveguides to mass manufacturing. Since the significant challenge in integration is achieving sufficient optical coupling, geometrical tolerances are investigated using raytracing simulation. Relevant degrees of freedom of the laser diode and waveguide are varied and validated by measuring alignment profiles. As a result, the mechanical interface provided by the PCB is presented and validated by confocal measurements. An innovative pick and place tool assembles the separated flexible waveguide to realize a demonstration system. As a validation, Fast Ethernet data transmission is presented over a flexible optical connection. In further steps, a miniaturization of the system is the goal to achieve a standardized system for applications like galvanic isolation.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
- Informatik (insg.)
- Angewandte Informatik
- Mathematik (insg.)
- Angewandte Mathematik
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Optical Interconnects XXII. Hrsg. / Ray T. Chen; Henning Schroder. SPIE, 2022. 120070C (Proceedings of SPIE - The International Society for Optical Engineering; Band 12007).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Fast ethernet operation of a printed optical transmission path using industrial integration technologies
AU - Evertz, A.
AU - Reitz, B.
AU - Olsen, E.
AU - Wetzel, U.
AU - Ghane-Mothlagh, R.
AU - Sengünes, I.
AU - Döhrmann, S.
AU - Seyfried, M.
AU - Oppermann, A.
AU - Tolle, N.
AU - Overmeyer, L.
N1 - Funding Information: This study was conducted within the OptiK-Net (Project ID 13N15045) project. This work was supported by the German Federal Ministry for Education and Research (BMBF) under the project sponsor VDI Technologiezentrum GmbH. Further the work was supported and funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany’s Excellence Strategy within the Cluster of Excellence PhoenixD (EXC 2122, Project ID 390833453). The authors would like to thank the sponsors for the attentive support and extensive possibilities during our research.
PY - 2022
Y1 - 2022
N2 - Printing optical waveguides is an approach to the high volume implementation of optical data transmission in conventional electronic systems. Flexographic printing enables the manufacturing of circular segment-shaped polymer waveguides on planar substrates, which show great potential as economic Gbit/s-capable short-range networks. This work describes a process chain to manufacture and integrate a printed optical data transmission path in conventional printed circuit boards (PCB). This sequence of processes gives an outlook on up-scaling utilizing printed optical waveguides to mass manufacturing. Since the significant challenge in integration is achieving sufficient optical coupling, geometrical tolerances are investigated using raytracing simulation. Relevant degrees of freedom of the laser diode and waveguide are varied and validated by measuring alignment profiles. As a result, the mechanical interface provided by the PCB is presented and validated by confocal measurements. An innovative pick and place tool assembles the separated flexible waveguide to realize a demonstration system. As a validation, Fast Ethernet data transmission is presented over a flexible optical connection. In further steps, a miniaturization of the system is the goal to achieve a standardized system for applications like galvanic isolation.
AB - Printing optical waveguides is an approach to the high volume implementation of optical data transmission in conventional electronic systems. Flexographic printing enables the manufacturing of circular segment-shaped polymer waveguides on planar substrates, which show great potential as economic Gbit/s-capable short-range networks. This work describes a process chain to manufacture and integrate a printed optical data transmission path in conventional printed circuit boards (PCB). This sequence of processes gives an outlook on up-scaling utilizing printed optical waveguides to mass manufacturing. Since the significant challenge in integration is achieving sufficient optical coupling, geometrical tolerances are investigated using raytracing simulation. Relevant degrees of freedom of the laser diode and waveguide are varied and validated by measuring alignment profiles. As a result, the mechanical interface provided by the PCB is presented and validated by confocal measurements. An innovative pick and place tool assembles the separated flexible waveguide to realize a demonstration system. As a validation, Fast Ethernet data transmission is presented over a flexible optical connection. In further steps, a miniaturization of the system is the goal to achieve a standardized system for applications like galvanic isolation.
KW - Electro-optical circuit boards (EOCB)
KW - Optical Interconnects
KW - Printed optical waveguides
UR - http://www.scopus.com/inward/record.url?scp=85131216789&partnerID=8YFLogxK
U2 - 10.1117/12.2609554
DO - 10.1117/12.2609554
M3 - Conference contribution
AN - SCOPUS:85131216789
T3 - Proceedings of SPIE - The International Society for Optical Engineering
BT - Optical Interconnects XXII
A2 - Chen, Ray T.
A2 - Schroder, Henning
PB - SPIE
T2 - Optical Interconnects XXII 2022
Y2 - 20 February 2022 through 24 February 2022
ER -