Details
Originalsprache | Englisch |
---|---|
Seiten (von - bis) | 1214-1223 |
Seitenumfang | 10 |
Fachzeitschrift | Computers and Structures |
Jahrgang | 89 |
Ausgabenummer | 11-12 |
Publikationsstatus | Veröffentlicht - 14 Okt. 2011 |
Abstract
In this paper, a novel orthotropic layer based failure criterion for modelling progressive failure of non-crimp fabrics is presented. The strength parameters and stiffnesses needed for this failure criterion are obtained from virtual material tests. Therefore, a finite element multiscale algorithm is used to model the effect of lower scale inhomogeneities on macroscale material behavior. With this multiscale approach it is possible to make predictions for one single layer within a textile preform solely from the knowledge of the mechanical behavior of the constituents fiber and matrix and from the textile fiber architecture. The obtained stiffnesses and strengthes for one textile layer are used as input data for the novel orthotropic failure criterion presented in this paper. In order to show the workability of this failure criterion, finite element simulations of coupon tests and of a three-point bending test of a textile composite are shown and compared to experimental data.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Tief- und Ingenieurbau
- Mathematik (insg.)
- Modellierung und Simulation
- Werkstoffwissenschaften (insg.)
- Allgemeine Materialwissenschaften
- Ingenieurwesen (insg.)
- Maschinenbau
- Informatik (insg.)
- Angewandte Informatik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Computers and Structures, Jahrgang 89, Nr. 11-12, 14.10.2011, S. 1214-1223.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Exploiting the structural reserve of textile composite structures by progressive failure analysis using a new orthotropic failure criterion
AU - Rolfes, Raimund
AU - Vogler, Matthias
AU - Czichon, Steffen
AU - Ernst, Gerald
N1 - Funding information: Part of this work was funded by the German Research Council (DFG). This support within the framework of SPP-1123 “Textile composite design and manufacturing technologies for lightweight structures in mechanical and vehicle engineering” is gratefully acknowledged. The excellent cooperation with DLR Braunschweig is very much appreciated.
PY - 2011/10/14
Y1 - 2011/10/14
N2 - In this paper, a novel orthotropic layer based failure criterion for modelling progressive failure of non-crimp fabrics is presented. The strength parameters and stiffnesses needed for this failure criterion are obtained from virtual material tests. Therefore, a finite element multiscale algorithm is used to model the effect of lower scale inhomogeneities on macroscale material behavior. With this multiscale approach it is possible to make predictions for one single layer within a textile preform solely from the knowledge of the mechanical behavior of the constituents fiber and matrix and from the textile fiber architecture. The obtained stiffnesses and strengthes for one textile layer are used as input data for the novel orthotropic failure criterion presented in this paper. In order to show the workability of this failure criterion, finite element simulations of coupon tests and of a three-point bending test of a textile composite are shown and compared to experimental data.
AB - In this paper, a novel orthotropic layer based failure criterion for modelling progressive failure of non-crimp fabrics is presented. The strength parameters and stiffnesses needed for this failure criterion are obtained from virtual material tests. Therefore, a finite element multiscale algorithm is used to model the effect of lower scale inhomogeneities on macroscale material behavior. With this multiscale approach it is possible to make predictions for one single layer within a textile preform solely from the knowledge of the mechanical behavior of the constituents fiber and matrix and from the textile fiber architecture. The obtained stiffnesses and strengthes for one textile layer are used as input data for the novel orthotropic failure criterion presented in this paper. In order to show the workability of this failure criterion, finite element simulations of coupon tests and of a three-point bending test of a textile composite are shown and compared to experimental data.
KW - Mechanical properties
KW - Multiscale modelling
KW - Progressive failure analysis
KW - Textile composites
UR - http://www.scopus.com/inward/record.url?scp=79955635860&partnerID=8YFLogxK
U2 - 10.1016/j.compstruc.2010.09.003
DO - 10.1016/j.compstruc.2010.09.003
M3 - Article
AN - SCOPUS:79955635860
VL - 89
SP - 1214
EP - 1223
JO - Computers and Structures
JF - Computers and Structures
SN - 0045-7949
IS - 11-12
ER -