Experimental Investigations and Automatic Numerical Optimization of a Bulk Metal Forming Process to Avoid Forging Folds

Publikation: Beitrag in Buch/Bericht/Sammelwerk/KonferenzbandAufsatz in KonferenzbandForschungPeer-Review

Autoren

  • Bernd Arno Behrens
  • Sonda Moakhar Bouguecha
  • Milan Vucetic
  • Anas Bouguecha
  • Mohammad Kazhai
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Titel des SammelwerksKey Engineering Materials
Herausgeber/-innenAldo Ofenheimer, Cecilia Poletti, Daniela Schalk-Kitting, Christof Sommitsch
Seiten305-310
Seitenumfang6
PublikationsstatusVeröffentlicht - 10 Juli 2015
Veranstaltung18th International ESAFORM Conference on Material Forming, ESAFORM 2015 - Graz, Österreich
Dauer: 15 Apr. 201517 Apr. 2015

Publikationsreihe

NameKey Engineering Materials
Band651-653
ISSN (Print)1013-9826
ISSN (elektronisch)1662-9795

Abstract

The detection of process failures in earlier design stages is essential for preventing high additional costs and a loss of time. Here, the finite element analysis (FEA) is an inherent part of the process design. This work represents numerical and experimental investigations, which were carried out in order to identify factors that influence the fold formation in an upsetting process of hollow parts, i.e. different forging velocities, different materials or the friction. The experimental results were compared with the numerical simulations. Based on these investigations, an automatic optimization model was created, which is the focus of this work. It allows varying and optimizing the experimentally determined process parameters, influencing the fold formation, automatically with the aim to produce a workpiece free of folds. For this purpose the commercial Software-System Forge (Transvalor) was used. The results of this work provide basic information for the development of complex processes. It can be shown that the automatic numerical optimization is an indispensable tool for the process design. It helps determining optimal process parameters individually and avoiding extensive trial and error investigations and hence a loss of time and costs.

ASJC Scopus Sachgebiete

Zitieren

Experimental Investigations and Automatic Numerical Optimization of a Bulk Metal Forming Process to Avoid Forging Folds. / Behrens, Bernd Arno; Bouguecha, Sonda Moakhar; Vucetic, Milan et al.
Key Engineering Materials. Hrsg. / Aldo Ofenheimer; Cecilia Poletti; Daniela Schalk-Kitting; Christof Sommitsch. 2015. S. 305-310 (Key Engineering Materials; Band 651-653).

Publikation: Beitrag in Buch/Bericht/Sammelwerk/KonferenzbandAufsatz in KonferenzbandForschungPeer-Review

Behrens, BA, Bouguecha, SM, Vucetic, M, Bouguecha, A & Kazhai, M 2015, Experimental Investigations and Automatic Numerical Optimization of a Bulk Metal Forming Process to Avoid Forging Folds. in A Ofenheimer, C Poletti, D Schalk-Kitting & C Sommitsch (Hrsg.), Key Engineering Materials. Key Engineering Materials, Bd. 651-653, S. 305-310, 18th International ESAFORM Conference on Material Forming, ESAFORM 2015, Graz, Österreich, 15 Apr. 2015. https://doi.org/10.4028/www.scientific.net/kem.651-653.305
Behrens, B. A., Bouguecha, S. M., Vucetic, M., Bouguecha, A., & Kazhai, M. (2015). Experimental Investigations and Automatic Numerical Optimization of a Bulk Metal Forming Process to Avoid Forging Folds. In A. Ofenheimer, C. Poletti, D. Schalk-Kitting, & C. Sommitsch (Hrsg.), Key Engineering Materials (S. 305-310). (Key Engineering Materials; Band 651-653). https://doi.org/10.4028/www.scientific.net/kem.651-653.305
Behrens BA, Bouguecha SM, Vucetic M, Bouguecha A, Kazhai M. Experimental Investigations and Automatic Numerical Optimization of a Bulk Metal Forming Process to Avoid Forging Folds. in Ofenheimer A, Poletti C, Schalk-Kitting D, Sommitsch C, Hrsg., Key Engineering Materials. 2015. S. 305-310. (Key Engineering Materials). doi: 10.4028/www.scientific.net/kem.651-653.305
Behrens, Bernd Arno ; Bouguecha, Sonda Moakhar ; Vucetic, Milan et al. / Experimental Investigations and Automatic Numerical Optimization of a Bulk Metal Forming Process to Avoid Forging Folds. Key Engineering Materials. Hrsg. / Aldo Ofenheimer ; Cecilia Poletti ; Daniela Schalk-Kitting ; Christof Sommitsch. 2015. S. 305-310 (Key Engineering Materials).
Download
@inproceedings{8e9f5add1f4d4d35a322b120274770ba,
title = "Experimental Investigations and Automatic Numerical Optimization of a Bulk Metal Forming Process to Avoid Forging Folds",
abstract = "The detection of process failures in earlier design stages is essential for preventing high additional costs and a loss of time. Here, the finite element analysis (FEA) is an inherent part of the process design. This work represents numerical and experimental investigations, which were carried out in order to identify factors that influence the fold formation in an upsetting process of hollow parts, i.e. different forging velocities, different materials or the friction. The experimental results were compared with the numerical simulations. Based on these investigations, an automatic optimization model was created, which is the focus of this work. It allows varying and optimizing the experimentally determined process parameters, influencing the fold formation, automatically with the aim to produce a workpiece free of folds. For this purpose the commercial Software-System Forge (Transvalor) was used. The results of this work provide basic information for the development of complex processes. It can be shown that the automatic numerical optimization is an indispensable tool for the process design. It helps determining optimal process parameters individually and avoiding extensive trial and error investigations and hence a loss of time and costs.",
keywords = "Bulk metal forming, Forging-folds, Optimization, Simulation",
author = "Behrens, {Bernd Arno} and Bouguecha, {Sonda Moakhar} and Milan Vucetic and Anas Bouguecha and Mohammad Kazhai",
note = "Publisher Copyright: {\textcopyright} (2015) Trans Tech Publications, Switzerland. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.; 18th International ESAFORM Conference on Material Forming, ESAFORM 2015 ; Conference date: 15-04-2015 Through 17-04-2015",
year = "2015",
month = jul,
day = "10",
doi = "10.4028/www.scientific.net/kem.651-653.305",
language = "English",
isbn = "9783038354710",
series = "Key Engineering Materials",
pages = "305--310",
editor = "Aldo Ofenheimer and Cecilia Poletti and Daniela Schalk-Kitting and Christof Sommitsch",
booktitle = "Key Engineering Materials",

}

Download

TY - GEN

T1 - Experimental Investigations and Automatic Numerical Optimization of a Bulk Metal Forming Process to Avoid Forging Folds

AU - Behrens, Bernd Arno

AU - Bouguecha, Sonda Moakhar

AU - Vucetic, Milan

AU - Bouguecha, Anas

AU - Kazhai, Mohammad

N1 - Publisher Copyright: © (2015) Trans Tech Publications, Switzerland. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.

PY - 2015/7/10

Y1 - 2015/7/10

N2 - The detection of process failures in earlier design stages is essential for preventing high additional costs and a loss of time. Here, the finite element analysis (FEA) is an inherent part of the process design. This work represents numerical and experimental investigations, which were carried out in order to identify factors that influence the fold formation in an upsetting process of hollow parts, i.e. different forging velocities, different materials or the friction. The experimental results were compared with the numerical simulations. Based on these investigations, an automatic optimization model was created, which is the focus of this work. It allows varying and optimizing the experimentally determined process parameters, influencing the fold formation, automatically with the aim to produce a workpiece free of folds. For this purpose the commercial Software-System Forge (Transvalor) was used. The results of this work provide basic information for the development of complex processes. It can be shown that the automatic numerical optimization is an indispensable tool for the process design. It helps determining optimal process parameters individually and avoiding extensive trial and error investigations and hence a loss of time and costs.

AB - The detection of process failures in earlier design stages is essential for preventing high additional costs and a loss of time. Here, the finite element analysis (FEA) is an inherent part of the process design. This work represents numerical and experimental investigations, which were carried out in order to identify factors that influence the fold formation in an upsetting process of hollow parts, i.e. different forging velocities, different materials or the friction. The experimental results were compared with the numerical simulations. Based on these investigations, an automatic optimization model was created, which is the focus of this work. It allows varying and optimizing the experimentally determined process parameters, influencing the fold formation, automatically with the aim to produce a workpiece free of folds. For this purpose the commercial Software-System Forge (Transvalor) was used. The results of this work provide basic information for the development of complex processes. It can be shown that the automatic numerical optimization is an indispensable tool for the process design. It helps determining optimal process parameters individually and avoiding extensive trial and error investigations and hence a loss of time and costs.

KW - Bulk metal forming

KW - Forging-folds

KW - Optimization

KW - Simulation

UR - http://www.scopus.com/inward/record.url?scp=84944238944&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/kem.651-653.305

DO - 10.4028/www.scientific.net/kem.651-653.305

M3 - Conference contribution

AN - SCOPUS:84944238944

SN - 9783038354710

T3 - Key Engineering Materials

SP - 305

EP - 310

BT - Key Engineering Materials

A2 - Ofenheimer, Aldo

A2 - Poletti, Cecilia

A2 - Schalk-Kitting, Daniela

A2 - Sommitsch, Christof

T2 - 18th International ESAFORM Conference on Material Forming, ESAFORM 2015

Y2 - 15 April 2015 through 17 April 2015

ER -