Evaporation model for interfacial flows based on a continuum-field representation of the source terms

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

  • S. Hardt
  • F. Wondra

Externe Organisationen

  • Technische Universität Darmstadt
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)5871-5895
Seitenumfang25
FachzeitschriftJournal of computational physics
Jahrgang227
Ausgabenummer11
Frühes Online-Datum29 Feb. 2008
PublikationsstatusVeröffentlicht - 10 Mai 2008

Abstract

An evaporation model compatible with interface-capturing schemes for vapor-liquid flow is presented. The model formulation is largely independent of the specific realization of interface-capturing and relies on a continuum-field representation of the source terms implementable in a broad class of CFD models. In contrast to most other numerical methods for evaporating interfacial flows, the model incorporates an evaporation source-term derived from a physical relationship for the evaporation mass flux. It is shown that especially for microscale evaporation phenomena this implies significant deviations of the interface temperature from the saturation temperature. The mass source-term distribution is derived from the solution of an inhomogeneous Helmholtz equation that contains a free parameter allowing to tune the spatial localization of the source. The evaporation model is implemented into the volume-of-fluid scheme with piecewise linear interface construction. Results are obtained for three analytically or semi-analytically solvable model problems, the first two being one-dimensional Stefan problems, the third a free droplet evaporation problem. In addition, a two-dimensional film boiling problem is considered. Overall, the comparison between the CFD and the (semi)-analytical models shows good agreement. Deviations exist where convective heat transfer due to spurious currents is no longer negligible compared to heat conduction. With regard to the film boiling problem, a similar evaporation pattern as recently identified using a level-set method is found. A major advantage of the developed evaporation model is that it does not refer to intrinsic details of the interface-capturing scheme, but relies on continuum-field quantities that can be computed by virtually any CFD approach.

ASJC Scopus Sachgebiete

Zitieren

Evaporation model for interfacial flows based on a continuum-field representation of the source terms. / Hardt, S.; Wondra, F.
in: Journal of computational physics, Jahrgang 227, Nr. 11, 10.05.2008, S. 5871-5895.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Hardt S, Wondra F. Evaporation model for interfacial flows based on a continuum-field representation of the source terms. Journal of computational physics. 2008 Mai 10;227(11):5871-5895. Epub 2008 Feb 29. doi: 10.1016/j.jcp.2008.02.020
Download
@article{5c574650972a437dacf96db5fe68adc0,
title = "Evaporation model for interfacial flows based on a continuum-field representation of the source terms",
abstract = "An evaporation model compatible with interface-capturing schemes for vapor-liquid flow is presented. The model formulation is largely independent of the specific realization of interface-capturing and relies on a continuum-field representation of the source terms implementable in a broad class of CFD models. In contrast to most other numerical methods for evaporating interfacial flows, the model incorporates an evaporation source-term derived from a physical relationship for the evaporation mass flux. It is shown that especially for microscale evaporation phenomena this implies significant deviations of the interface temperature from the saturation temperature. The mass source-term distribution is derived from the solution of an inhomogeneous Helmholtz equation that contains a free parameter allowing to tune the spatial localization of the source. The evaporation model is implemented into the volume-of-fluid scheme with piecewise linear interface construction. Results are obtained for three analytically or semi-analytically solvable model problems, the first two being one-dimensional Stefan problems, the third a free droplet evaporation problem. In addition, a two-dimensional film boiling problem is considered. Overall, the comparison between the CFD and the (semi)-analytical models shows good agreement. Deviations exist where convective heat transfer due to spurious currents is no longer negligible compared to heat conduction. With regard to the film boiling problem, a similar evaporation pattern as recently identified using a level-set method is found. A major advantage of the developed evaporation model is that it does not refer to intrinsic details of the interface-capturing scheme, but relies on continuum-field quantities that can be computed by virtually any CFD approach.",
keywords = "Droplet evaporation, Evaporation model, Film boiling, Interfacial flow, Stefan problem, Volume-of-fluid method",
author = "S. Hardt and F. Wondra",
year = "2008",
month = may,
day = "10",
doi = "10.1016/j.jcp.2008.02.020",
language = "English",
volume = "227",
pages = "5871--5895",
journal = "Journal of computational physics",
issn = "0021-9991",
publisher = "Academic Press Inc.",
number = "11",

}

Download

TY - JOUR

T1 - Evaporation model for interfacial flows based on a continuum-field representation of the source terms

AU - Hardt, S.

AU - Wondra, F.

PY - 2008/5/10

Y1 - 2008/5/10

N2 - An evaporation model compatible with interface-capturing schemes for vapor-liquid flow is presented. The model formulation is largely independent of the specific realization of interface-capturing and relies on a continuum-field representation of the source terms implementable in a broad class of CFD models. In contrast to most other numerical methods for evaporating interfacial flows, the model incorporates an evaporation source-term derived from a physical relationship for the evaporation mass flux. It is shown that especially for microscale evaporation phenomena this implies significant deviations of the interface temperature from the saturation temperature. The mass source-term distribution is derived from the solution of an inhomogeneous Helmholtz equation that contains a free parameter allowing to tune the spatial localization of the source. The evaporation model is implemented into the volume-of-fluid scheme with piecewise linear interface construction. Results are obtained for three analytically or semi-analytically solvable model problems, the first two being one-dimensional Stefan problems, the third a free droplet evaporation problem. In addition, a two-dimensional film boiling problem is considered. Overall, the comparison between the CFD and the (semi)-analytical models shows good agreement. Deviations exist where convective heat transfer due to spurious currents is no longer negligible compared to heat conduction. With regard to the film boiling problem, a similar evaporation pattern as recently identified using a level-set method is found. A major advantage of the developed evaporation model is that it does not refer to intrinsic details of the interface-capturing scheme, but relies on continuum-field quantities that can be computed by virtually any CFD approach.

AB - An evaporation model compatible with interface-capturing schemes for vapor-liquid flow is presented. The model formulation is largely independent of the specific realization of interface-capturing and relies on a continuum-field representation of the source terms implementable in a broad class of CFD models. In contrast to most other numerical methods for evaporating interfacial flows, the model incorporates an evaporation source-term derived from a physical relationship for the evaporation mass flux. It is shown that especially for microscale evaporation phenomena this implies significant deviations of the interface temperature from the saturation temperature. The mass source-term distribution is derived from the solution of an inhomogeneous Helmholtz equation that contains a free parameter allowing to tune the spatial localization of the source. The evaporation model is implemented into the volume-of-fluid scheme with piecewise linear interface construction. Results are obtained for three analytically or semi-analytically solvable model problems, the first two being one-dimensional Stefan problems, the third a free droplet evaporation problem. In addition, a two-dimensional film boiling problem is considered. Overall, the comparison between the CFD and the (semi)-analytical models shows good agreement. Deviations exist where convective heat transfer due to spurious currents is no longer negligible compared to heat conduction. With regard to the film boiling problem, a similar evaporation pattern as recently identified using a level-set method is found. A major advantage of the developed evaporation model is that it does not refer to intrinsic details of the interface-capturing scheme, but relies on continuum-field quantities that can be computed by virtually any CFD approach.

KW - Droplet evaporation

KW - Evaporation model

KW - Film boiling

KW - Interfacial flow

KW - Stefan problem

KW - Volume-of-fluid method

UR - http://www.scopus.com/inward/record.url?scp=42649137533&partnerID=8YFLogxK

U2 - 10.1016/j.jcp.2008.02.020

DO - 10.1016/j.jcp.2008.02.020

M3 - Article

AN - SCOPUS:42649137533

VL - 227

SP - 5871

EP - 5895

JO - Journal of computational physics

JF - Journal of computational physics

SN - 0021-9991

IS - 11

ER -