Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 333-340 |
| Seitenumfang | 8 |
| Fachzeitschrift | International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives |
| Jahrgang | 43 |
| Publikationsstatus | Veröffentlicht - 30 Mai 2022 |
| Veranstaltung | 2022 24th ISPRS Congress on Imaging Today, Foreseeing Tomorrow, Commission III - Nice, Frankreich Dauer: 6 Juni 2022 → 11 Juni 2022 |
Abstract
The Synthetic Aperture Radar (SAR) satellite Sentinel-1 provides excellent traffic infrastructure monitoring capabilities due to its short revisit time, wide-scale coverage and free of charge data policy. However, pixels from Sentinel-1 have a medium spatial resolution so that traffic infrastructure is only covered by a few pixels. Moreover, Interferometric Synthetic Aperture Radar (InSAR) yields deformation time series for coherent pixels only, thus limiting the number of pixels reporting the ground motion at traffic infrastructure. Although various InSAR time series methods have been successfully applied for traffic infrastructure monitoring, the selection of appropriate methods achieving a high pixel density has not yet been evaluated. In this study, we test whether we can improve the monitoring capabilities by combining different InSAR time series methods. On the one hand, we applied widely used Stanford Method for Persistent Scatterers (StaMPS) as a baseline method to retrieve the deformation time series. On the other hand, we enhanced the phase quality in a pre-processing step using the Phase-Linking (PL) approach and afterwards estimated the deformation time series also with StaMPS based on pixels selected by PL. We compared and evaluated the achieved pixel densities from both methods at main roads, highways and railways in a study area in Germany. We found that the InSAR time series methods selected complementary sets of pixels at all traffic infrastructure types. Moreover, the results indicate a great potential for railway monitoring using Sentinel-1 InSAR due to both high pixel density and homogeneous spatial distribution of pixels. Interestingly, coherent scatterers selected by StaMPS were observed to coincide with large traffic signs at highways which show a double-bounce scattering in the amplitude images. This study shows the benefits of combining PL and StaMPS for increased pixel density at traffic infrastructure and confirms Sentinel-1 data as a suitable data source for traffic infrastructure monitoring.
ASJC Scopus Sachgebiete
- Informatik (insg.)
- Information systems
- Sozialwissenschaften (insg.)
- Geografie, Planung und Entwicklung
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives, Jahrgang 43, 30.05.2022, S. 333-340.
Publikation: Beitrag in Fachzeitschrift › Konferenzaufsatz in Fachzeitschrift › Forschung › Peer-Review
}
TY - JOUR
T1 - Evaluation of Pixel Selection Methods for Traffic Infrastructure Monitoring Using SENTINEL-1 Insar
AU - Piter, A.
AU - Haghighi, M. H.
AU - Motagh, M.
N1 - Funding Information: This work is part of the project SAR4Infra funded by the German Federal Ministry for Digital and Transport (BMDV). It contains modified Copernicus data provided by the European Space Agency (ESA). Maps and profiles were created with QGIS (QGIS Development Team, 2021).
PY - 2022/5/30
Y1 - 2022/5/30
N2 - The Synthetic Aperture Radar (SAR) satellite Sentinel-1 provides excellent traffic infrastructure monitoring capabilities due to its short revisit time, wide-scale coverage and free of charge data policy. However, pixels from Sentinel-1 have a medium spatial resolution so that traffic infrastructure is only covered by a few pixels. Moreover, Interferometric Synthetic Aperture Radar (InSAR) yields deformation time series for coherent pixels only, thus limiting the number of pixels reporting the ground motion at traffic infrastructure. Although various InSAR time series methods have been successfully applied for traffic infrastructure monitoring, the selection of appropriate methods achieving a high pixel density has not yet been evaluated. In this study, we test whether we can improve the monitoring capabilities by combining different InSAR time series methods. On the one hand, we applied widely used Stanford Method for Persistent Scatterers (StaMPS) as a baseline method to retrieve the deformation time series. On the other hand, we enhanced the phase quality in a pre-processing step using the Phase-Linking (PL) approach and afterwards estimated the deformation time series also with StaMPS based on pixels selected by PL. We compared and evaluated the achieved pixel densities from both methods at main roads, highways and railways in a study area in Germany. We found that the InSAR time series methods selected complementary sets of pixels at all traffic infrastructure types. Moreover, the results indicate a great potential for railway monitoring using Sentinel-1 InSAR due to both high pixel density and homogeneous spatial distribution of pixels. Interestingly, coherent scatterers selected by StaMPS were observed to coincide with large traffic signs at highways which show a double-bounce scattering in the amplitude images. This study shows the benefits of combining PL and StaMPS for increased pixel density at traffic infrastructure and confirms Sentinel-1 data as a suitable data source for traffic infrastructure monitoring.
AB - The Synthetic Aperture Radar (SAR) satellite Sentinel-1 provides excellent traffic infrastructure monitoring capabilities due to its short revisit time, wide-scale coverage and free of charge data policy. However, pixels from Sentinel-1 have a medium spatial resolution so that traffic infrastructure is only covered by a few pixels. Moreover, Interferometric Synthetic Aperture Radar (InSAR) yields deformation time series for coherent pixels only, thus limiting the number of pixels reporting the ground motion at traffic infrastructure. Although various InSAR time series methods have been successfully applied for traffic infrastructure monitoring, the selection of appropriate methods achieving a high pixel density has not yet been evaluated. In this study, we test whether we can improve the monitoring capabilities by combining different InSAR time series methods. On the one hand, we applied widely used Stanford Method for Persistent Scatterers (StaMPS) as a baseline method to retrieve the deformation time series. On the other hand, we enhanced the phase quality in a pre-processing step using the Phase-Linking (PL) approach and afterwards estimated the deformation time series also with StaMPS based on pixels selected by PL. We compared and evaluated the achieved pixel densities from both methods at main roads, highways and railways in a study area in Germany. We found that the InSAR time series methods selected complementary sets of pixels at all traffic infrastructure types. Moreover, the results indicate a great potential for railway monitoring using Sentinel-1 InSAR due to both high pixel density and homogeneous spatial distribution of pixels. Interestingly, coherent scatterers selected by StaMPS were observed to coincide with large traffic signs at highways which show a double-bounce scattering in the amplitude images. This study shows the benefits of combining PL and StaMPS for increased pixel density at traffic infrastructure and confirms Sentinel-1 data as a suitable data source for traffic infrastructure monitoring.
KW - InSAR
KW - monitoring
KW - Persistent Scatterer Interferometry
KW - Phase-Linking
KW - traffic infrastructure
UR - http://www.scopus.com/inward/record.url?scp=85131918616&partnerID=8YFLogxK
U2 - 10.5194/isprs-archives-XLIII-B3-2022-333-2022
DO - 10.5194/isprs-archives-XLIII-B3-2022-333-2022
M3 - Conference article
AN - SCOPUS:85131918616
VL - 43
SP - 333
EP - 340
JO - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives
JF - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives
SN - 1682-1750
T2 - 2022 24th ISPRS Congress on Imaging Today, Foreseeing Tomorrow, Commission III
Y2 - 6 June 2022 through 11 June 2022
ER -