Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 1516-1520 |
| Seitenumfang | 5 |
| Fachzeitschrift | Applied Optics |
| Jahrgang | 51 |
| Ausgabenummer | 10 |
| Publikationsstatus | Veröffentlicht - 1 Apr. 2012 |
Abstract
One of the main tasks of the quality test is the inspection of all relevant geometric parts related to the predefined tolerance range, whereas the uncertainty of measurement has to be less than the tolerance range. The reachable uncertainty of measurement can be determined using method A of the ISO Guide to the Expression of Uncertainty in Measurement (GUM), which is expensive and time consuming and has to be carried out for each individual metrologic case. Furthermore, it is possible to check the suitability of the measurement system for the planned inspection using virtual measurement techniques and therewith to reduce the time and money spent. This means that the uncertainty of measurement is estimated using method B of the GUM. In this paper, a virtual fringe projection system is used for the estimation of the uncertainty of measurement, which is compared with the uncertainty of measurement determined with a real measurement system using method A of the GUM. With the presented method, it is possible to calculate an optimal measurement position within the measurement volume, based on a minimum uncertainty of measurement. Thereby, the influence of the operator related to the uncertainty can be significantly reduced.
ASJC Scopus Sachgebiete
- Physik und Astronomie (insg.)
- Atom- und Molekularphysik sowie Optik
- Ingenieurwesen (insg.)
- Ingenieurwesen (sonstige)
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Applied Optics, Jahrgang 51, Nr. 10, 01.04.2012, S. 1516-1520.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Estimation of measurement uncertainties using virtual fringe projection technique
AU - Haskamp, Klaus
AU - Kästner, Markus
AU - Ohrt, Christoph
AU - Reithmeier, Eduard
PY - 2012/4/1
Y1 - 2012/4/1
N2 - One of the main tasks of the quality test is the inspection of all relevant geometric parts related to the predefined tolerance range, whereas the uncertainty of measurement has to be less than the tolerance range. The reachable uncertainty of measurement can be determined using method A of the ISO Guide to the Expression of Uncertainty in Measurement (GUM), which is expensive and time consuming and has to be carried out for each individual metrologic case. Furthermore, it is possible to check the suitability of the measurement system for the planned inspection using virtual measurement techniques and therewith to reduce the time and money spent. This means that the uncertainty of measurement is estimated using method B of the GUM. In this paper, a virtual fringe projection system is used for the estimation of the uncertainty of measurement, which is compared with the uncertainty of measurement determined with a real measurement system using method A of the GUM. With the presented method, it is possible to calculate an optimal measurement position within the measurement volume, based on a minimum uncertainty of measurement. Thereby, the influence of the operator related to the uncertainty can be significantly reduced.
AB - One of the main tasks of the quality test is the inspection of all relevant geometric parts related to the predefined tolerance range, whereas the uncertainty of measurement has to be less than the tolerance range. The reachable uncertainty of measurement can be determined using method A of the ISO Guide to the Expression of Uncertainty in Measurement (GUM), which is expensive and time consuming and has to be carried out for each individual metrologic case. Furthermore, it is possible to check the suitability of the measurement system for the planned inspection using virtual measurement techniques and therewith to reduce the time and money spent. This means that the uncertainty of measurement is estimated using method B of the GUM. In this paper, a virtual fringe projection system is used for the estimation of the uncertainty of measurement, which is compared with the uncertainty of measurement determined with a real measurement system using method A of the GUM. With the presented method, it is possible to calculate an optimal measurement position within the measurement volume, based on a minimum uncertainty of measurement. Thereby, the influence of the operator related to the uncertainty can be significantly reduced.
UR - http://www.scopus.com/inward/record.url?scp=84859326176&partnerID=8YFLogxK
U2 - 10.1364/AO.51.001516
DO - 10.1364/AO.51.001516
M3 - Article
AN - SCOPUS:84859326176
VL - 51
SP - 1516
EP - 1520
JO - Applied Optics
JF - Applied Optics
SN - 1559-128X
IS - 10
ER -