Energy balance in precision hard machining with worn CBN cutting tools

Publikation: Konferenzbeitrag › Paper › Forschung › Peer-Review

Autorschaft

  • Wit Grzesik
  • Berend Denkena
  • Krzysztof Zak
  • Thilo Grove
  • Benjamin Bergmann

Organisationseinheiten

Externe Organisationen

  • Opole University of Technology
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
PublikationsstatusVeröffentlicht - 18 Okt. 2015
Veranstaltung8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015 - Kyoto, Japan
Dauer: 18 Okt. 2015 → 22 Okt. 2015

Konferenz

Konferenz8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015
Land/GebietJapan
OrtKyoto
Zeitraum18 Okt. 2015 → 22 Okt. 2015

Abstract

This paper highlights the influence of tool wear on the energy balance in precision hard turning using CBN cutting tools. Experimental plan includes continuous measurements of the tool nose wear VBC and the corresponding changes of component forces Fc, Ff and Fp. Variable factors were feed rate, depth of cut and tool nose radius. The experimental data were recorded during wear test duration of maximum 100 min. As a result, the specific cutting and ploughing energies were determined for all measuring points. It was reasoned that the balance between the specific and ploughing energies can effectively be used to optimize hard machining operations.

ASJC Scopus Sachgebiete

Zitieren

Energy balance in precision hard machining with worn CBN cutting tools. / Grzesik, Wit; Denkena, Berend; Zak, Krzysztof et al.
2015. Beitrag in 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan.

Publikation: Konferenzbeitrag › Paper › Forschung › Peer-Review

Grzesik, W, Denkena, B, Zak, K, Grove, T & Bergmann, B 2015, 'Energy balance in precision hard machining with worn CBN cutting tools', Beitrag in 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan, 18 Okt. 2015 - 22 Okt. 2015.
Grzesik, W., Denkena, B., Zak, K., Grove, T., & Bergmann, B. (2015). Energy balance in precision hard machining with worn CBN cutting tools. Beitrag in 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan.
Grzesik W, Denkena B, Zak K, Grove T, Bergmann B. Energy balance in precision hard machining with worn CBN cutting tools. 2015. Beitrag in 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan.
Grzesik, Wit ; Denkena, Berend ; Zak, Krzysztof et al. / Energy balance in precision hard machining with worn CBN cutting tools. Beitrag in 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan.
Download
@conference{30b38b16ad844c2894db078bf502e459,
title = "Energy balance in precision hard machining with worn CBN cutting tools",
abstract = "This paper highlights the influence of tool wear on the energy balance in precision hard turning using CBN cutting tools. Experimental plan includes continuous measurements of the tool nose wear VBC and the corresponding changes of component forces Fc, Ff and Fp. Variable factors were feed rate, depth of cut and tool nose radius. The experimental data were recorded during wear test duration of maximum 100 min. As a result, the specific cutting and ploughing energies were determined for all measuring points. It was reasoned that the balance between the specific and ploughing energies can effectively be used to optimize hard machining operations.",
keywords = "CBN tool, Cutting energy, Hard machining, Ploughing energy, Tool wear",
author = "Wit Grzesik and Berend Denkena and Krzysztof Zak and Thilo Grove and Benjamin Bergmann",
year = "2015",
month = oct,
day = "18",
language = "English",
note = "8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015 ; Conference date: 18-10-2015 Through 22-10-2015",

}

Download

TY - CONF

T1 - Energy balance in precision hard machining with worn CBN cutting tools

AU - Grzesik, Wit

AU - Denkena, Berend

AU - Zak, Krzysztof

AU - Grove, Thilo

AU - Bergmann, Benjamin

PY - 2015/10/18

Y1 - 2015/10/18

N2 - This paper highlights the influence of tool wear on the energy balance in precision hard turning using CBN cutting tools. Experimental plan includes continuous measurements of the tool nose wear VBC and the corresponding changes of component forces Fc, Ff and Fp. Variable factors were feed rate, depth of cut and tool nose radius. The experimental data were recorded during wear test duration of maximum 100 min. As a result, the specific cutting and ploughing energies were determined for all measuring points. It was reasoned that the balance between the specific and ploughing energies can effectively be used to optimize hard machining operations.

AB - This paper highlights the influence of tool wear on the energy balance in precision hard turning using CBN cutting tools. Experimental plan includes continuous measurements of the tool nose wear VBC and the corresponding changes of component forces Fc, Ff and Fp. Variable factors were feed rate, depth of cut and tool nose radius. The experimental data were recorded during wear test duration of maximum 100 min. As a result, the specific cutting and ploughing energies were determined for all measuring points. It was reasoned that the balance between the specific and ploughing energies can effectively be used to optimize hard machining operations.

KW - CBN tool

KW - Cutting energy

KW - Hard machining

KW - Ploughing energy

KW - Tool wear

UR - http://www.scopus.com/inward/record.url?scp=84974571348&partnerID=8YFLogxK

M3 - Paper

T2 - 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015

Y2 - 18 October 2015 through 22 October 2015

ER -